The choice of the border for the bathroom and the methods of gluing it

The functional and aesthetic appeal of your bathroom can be greatly improved by selecting the appropriate border. In addition to being aesthetically pleasing, borders have functional uses such as shielding walls from moisture and facilitating a seamless transition between various surfaces. Important factors to consider when choosing a border are material, design, and durability. From glass and ceramic to PVC and natural stone, every material has special qualities that affect style and upkeep.

The next step is to make sure the border is installed safely and effectively after you’ve selected one that fits your functional needs and blends in with the design of your bathroom. In addition to extending the border’s lifespan, proper installation guarantees a tidy, expert finish. Various gluing techniques might be needed, depending on the border material and the surface to which it will be attached. A successful installation depends on knowing these techniques and selecting the appropriate adhesive.

The most common technique for adhering bathroom borders is to use specialty adhesives made for ceramic or glass. Strong bonds are produced by these adhesives, which are also resistant to moisture and humidity—two things that are frequently found in bathroom settings. Additionally important is surface preparation, which helps to maximize the adhesive’s effectiveness and bond strength by making sure the area is dust- and grease-free, clean, and dry.

You can confidently choose and install a bathroom border that not only improves the overall appearance of your space but also endures the rigors of a bathroom environment over time by investigating the various options available and realizing the significance of appropriate installation techniques. This guide will go into great detail about each step, offering helpful advice and pointers to help you produce a polished and long-lasting outcome.

Choosing the Border Methods of Gluing
1. Consider the bathroom decor and color scheme. 1. Clean the surface thoroughly before applying adhesive.
2. Measure the length needed accurately. 2. Apply adhesive evenly on the back of the border.
3. Select a border material that complements tiles. 3. Press the border firmly into place and hold.
4. Ensure the border is waterproof and durable. 4. Allow adhesive to cure as per manufacturer"s instructions.

Choosing a border for sealing a gap

The only ways to ensure that there are no cracks around the sink or bathtub without sealing them are to level the walls and floors precisely, install the plumbing precisely, and lay the tiles. Doing work of this caliber is not always feasible, and it is nearly impossible without a lot of experience. The masters frequently have a small gap even after the baths and tiles are installed. There is a much higher chance of water seeping in, elevated humidity, and the growth of mold.

There are a few options for borders available for purchase, but the selection of materials for the seam locations is not very extensive. Self-adhesive tape is the least expensive of them; items made of ceramics and real or artificial stone are more costly. It is essential to select the appropriate border size. The following suggestions should be used as a guide when choosing along the length:

  • ceramic products – in the width of the tiles;
  • plastic skirting boards – along the length of the side;
  • Border tape – for the entire length of the seam.

The size of the gap will determine how wide the components or adhesive tape are. Use white silicone sealant for seaming if the last is less than 3 mm. A 3 cm wide border surrounds slots up to 5–6 mm and larger slots up to 3-6 cm. If the gaps are large, they are first filled with the widest profile possible using a foam or concrete solution.

Flexible self-adhesive tape-border

Brower border, or border tape – original material that allows sealing the joints between the bathroom and the wall. The tape can be mounted with your own hands, you do not need to have special skills for this. The disadvantage of such a border can be called relative fragility (the average service life is 3 years), but thanks to the cheapness, changing its work will not be. In addition to protection against dirt and moisture, border tape is used to give the finished species the room – gluing the strip completes the repair. The skirting board is perfect for the Akrilova bath – which is better to choose, you can decide depending on its shape (oval, square).

The bath’s elastic skirting boat is composed of a unique plastic that has various polymer additives. The back is coated with a ripped film and liquid butyl glue. The material is applied in 3.5-meter rolls and has an angular and figured shape. Any typical bath can be pasted using the length indicated. Certain manufacturers offer sets that come with cutting knives, applicators, and two corners. Plinths are made from bacteria and fungi in the composition along with antiseptics and fungicidal additives.

Plastic borders

A cheap solution to hide an ugly gap against the wall is a plastic corner. The best plastic borders mimic the look of ceramic tiles. There are various kinds:

  • internal, they can be put under the tile;
  • external ones, mounted at the joints after the completion of wall cladding;
  • two-part profiles from the holder strip and the upper decorative element.

Plastic curbs typically measure three to five centimeters wide by one to three meters long. For a typical bath, there are two 1.8-meter elements or one three-meter element. Skirting boards are cut to the required sizes prior to installation. You should also purchase stars to fasten in the corner and plugs for the ends. There are various shades of plastic profiles, including beige, green, pink, and blue. Regrettably, the material will need to be replaced in a few years due to fading caused by water and common household chemicals.

Ceramic borders

There are better ceramic plinths for bathrooms than others. He has exceptional wear resistance, doesn’t lose his gloss for decades, and is not afraid of water. Additional benefits of the substance:

  • Environmental purity, harmlessness for humans;
  • frost resistance (withstands large temperature changes);
  • fire resistance – ceramics does not burn, does not emit harmful substances.

The material provides good resistance to leaks and does not peel off in a bathroom with high humidity levels. The pattern on the curbs also retains its brightness. Even with a big space between the bathroom and the wall, the skirting board will look great. In this instance, the opening is filled in with bricks and then covered in ornamentation. Ceramic borders are easily cleaned, and the soap plaque that covers them does not yellow with time. A wide variety of products are available, many of which are sold in conjunction with tiles and are ideal for them. They are not only aesthetically pleasing but also practical:

  • emphasize the geometry of tiles;
  • complement the thematic drawing;
  • The perimeter of the bath will be highlighted.

Natural stone borders

These products have qualities that are comparable to ceramic tiles: they are dependable and long-lasting. It’s true that a well-designed bathroom is necessary; otherwise, the stone borders won’t look their best. There are more expensive and economy class products made in Moscow, Ukraine. Gorgeous profiles of granite and marble, with opulent-looking travertine elements. Independent stone border installation is not advised; only a professional can design such an interior.

The article "The choice of the bathroom border and the methods of gluing it" discusses different materials and styles to help readers choose the perfect border for their bathroom. It includes helpful guidance on surface preparation, selecting appropriate adhesives, and providing detailed installation instructions. By delving into these essential elements, readers will acquire the necessary understanding to confidently improve the aesthetic appeal and longevity of the border installation in their bathroom.

Glue for borders

If the skirting boards are not self-adhesive, is it better to glue them? Usually, masters recommend laying them on silicone sealant and changing the gluing every so often. Any water-based sealant eventually lags behind the wall as it darkens (after two to three years). The installed skirting board must be removed, the bath’s wall and edge must be cleaned and disinfected, and the material must be refastened. Its service life may be shortened to 4–8 months with poor sealant quality, depending on how hard the bath is used and how the room is ventilated.

There is a way out; you just need to pay attention to these pointers:

  1. Apply the "correct" sealant, which is designed for aquariums. Thanks to antiseptic additives, it does not darken in a special composition, is not subject to mold.
  2. Choosing a white or transparent tool (the latter usually costs more).
  3. Buy only an expensive sealant of a famous brand. If the composition contains MS-polymers, this gives high hydraulic-repellent properties (the “moment crystal” serves as an example).
  4. The elasticity of the sealant should be at a high level, this will allow the means to maintain integrity with small movements of the bath.

Other methods are available if there is no sealant. For borders, a dependable adhesive composition with high moisture resistance and silicone or acrylic polymer addition is appropriate. Tile glue and "liquid nails" are appropriate.

Surface preparation and preliminary work

While there are various technologies available for installing the bath curb, base preparation is a must. Use a good, high-quality detergent to clean the bath’s walls and edges. Rinse with water to remove any remaining grease. If calcified soda is not available, regular soda or alcohol is used for the final objective. Drying the surface is required prior to attaching the baseboard. You can use a blossom rag to wipe the base and a hairdryer to dry it for this purpose. When it comes time to actually refinish the floor, it is necessary to thoroughly clean the old carpet.

Some materials and tools may be useful to stick the curb (some not necessary, depending on the type of profiles):

  • glue or sealant;
  • mounting gun;
  • level, preferably laser;
  • rubber spatula;
  • sandpaper on the bar;
  • Passatigi;
  • Bulgarian;
  • roulette;
  • construction tape;
  • sharp knife;
  • Profiles of the desired length.

Bleing the tape

The simplest method for applying border tape to the intersection. The figure differs slightly from the corner in that it has an average longitudinal sector devoid of adhesive material. It is essential to make initial annotations. Since a pencil or marker is difficult to remove from tile, the border is glued with paper tape at the desired height. You can delete at the end of the tape.

In order to install, borders are cut. You must allow 2 centimeters for each area of the bath. After that, the profile is properly bent while being warmed up with a hot hairdryer. Once elastic, he will take on the required shape. Additionally, this is required to prevent the tape from peeling off too soon. The following are the installation instructions:

  • start work from the corner;
  • Gently separate the film from the tape in small areas – 15 cm each;
  • In parallel, press the profile with an applicator, this must be done as strong as possible (then the tape will be glued stronger);
  • pay attention to the places of contact of the product and inter -seams;
  • In the corners, put the curb with particular thoroughness, the general view of the bath depends on this (the corner tape is left even, from below is cut at an angle of 45 degrees to about the middle);
  • the joints of the tape is isolated with sealant;
  • During the day, you can’t use the bathroom, after, in the presence of lagging areas, glue them with “liquid nails”.

Installation of plastic skirting boards

Although installing a plastic border requires a different method, the preparatory steps are the same. The next step is to use a tape measure to measure the length of the bath, mark the curb, and cut off the material. The simplest method for quickly removing components is to divide them into the bath’s two sides. Corns erect at a 45-degree angle. In order to avoid leaving glue stains, adhere glue paper tape 2 mm above and below the future corner.

The following is the order of work:

  • attach a piece of the curb to the wall, press;
  • bend the corner on top, leaving the space between the wall and the border;
  • insert the tip of the gun, squeeze into the gap a sealant or “liquid nails”;
  • gently smooth the sealant with a spatula;
  • Similarly to do with the lower part of the border;
  • press the corner strongly;
  • after a few minutes remove adhesive tape.

In the event that a plastic border is chosen to be placed beneath the tile, this is done during the installation process; however, it can only be tiled over. It is not advised for experts to use such a technique because of the material’s fragility.

Glue of a ceramic corner

Ceramic corner laying is more challenging, but typically even novices can handle it with a little instruction. The material is mounted as follows beneath the tile:

  • Apply a sealant layer between the bathroom and the wall, filling the gap evenly, align it with a spatula or wet hand;
  • knead glue for tiles according to the instructions;
  • trim the borders for joints and corners at an angle of 45 degrees, using a grinder, a tile knife (you can use “biting” with pliers, then sanding out the surface);
  • start work from the corner;
  • Put tile glue on the back of the curbs, glue it to the joint, remove the excess with a spatula;
  • Continue installation, leaving the minimum intervals between the elements;
  • The next day, water the corners with water to compact glue, use a sealant or grout for seams in a day.

There is a distinct method for mounting the curb on the tile. The wall must be treated with "liquid nails," the ceramic corner must be pressed against the wall, and other elements must be treated similarly (don’t forget to apply the level!). Sealant should be applied to the seams once the glue has dried.

It’s important to weigh practicality and aesthetic preferences when selecting a border for your bathroom. Whether you choose to use mosaic, glass, ceramic, or another material, make sure it goes well with the rest of your decor and can withstand the damp conditions of the bathroom. Examine its robustness, ease of upkeep, and compatibility with your overall design concept.

It’s important to prepare before gluing the border. To guarantee that the glue adheres properly, thoroughly clean and dry the surface. Choose a premium adhesive that works well with the material of your border; generally, specialty adhesives for mosaic, glass, or ceramic surfaces are advised. To ensure a strong and long-lasting bond, carefully follow the manufacturer’s instructions.

Think about how to install the border depending on the style you’ve selected. While some borders require traditional adhesive application, others are made with peel-and-stick backing for simple installation. Select the technique based on the intricacy of the border design and your degree of expertise.

Finally, give the adhesive enough time to cure and dry before using the restroom. For the adhesive to completely set and guarantee that the border remains securely in place, this step is essential. To avoid premature loosening or damage to the installation, do not rush this process.

Video on the topic

How to glue a pvc border on an acrylic bath?

Ceramic border for a bath, is it worth it to put it?

Brill for Bath BNV series BNV brand

Border for a bath

How to glue an acrylic border (BNV) on an acrylic bath?

What color, in your opinion, is able to make a person happier?
Share to friends
Daniel Sedov

Master finish with 20 years of experience. I know everything about painting walls, ceilings, facades. I will gladly help you make your home beautiful and cozy.NoEDIT]

Rate author
Add a comment