Round corners in the house – how to do it and why it is necessary

Any living area can benefit from the softness and elegance that come with rounded corners and curved edges. But including them in your home’s design can be advantageous for more reasons than just their visual appeal. This post will explain how to create rounded corners in your home and why it’s a good idea.

Let’s start by discussing the visual impact. While rounded corners provide a sense of flow and continuity, sharp corners can make a space feel harsh and angular. They can soften a room’s overall appearance and increase its coziness and comfort. Round corners can improve the atmosphere in any space, whether you’re decorating a cozy cottage or remodeling a modern apartment.

Safety is yet another benefit of rounded corners. Sharp corners can be dangerous in houses with small children or pets. Instead, you can reduce the possibility of mishaps and make the space safer for everyone by choosing rounded corners. Furthermore, because dust and debris are less likely to gather in nooks and crannies that are difficult to access, rounded corners may be easier to clean than sharp ones.

However, how can one go about adding rounded corners to their house? Curving the edges of walls and ceilings with flexible molding or trim is one way to achieve this. You can obtain the precise curvature you want with this method because it allows for customization. As an alternative, you might spend money on rounded-corner furniture or go with curved kitchen and bathroom countertops and cabinetry.

There are a few pointers to remember when painting rounded corners. For a smooth application, use a high-quality paintbrush with soft bristles. If you want extra durability, use paint with an eggshell or satin finish. To achieve clean, crisp lines, use painter’s tape and take your time when cutting in around curved edges.

Topic Details
Why round corners Round corners give a softer look to your home and can make spaces feel more inviting.
Materials needed You"ll need corner bead, joint compound, sandpaper, and paint.
Preparation First, ensure the corners are clean and free of debris.
Applying corner bead Attach the corner bead to the corner using screws or nails.
Applying joint compound Apply joint compound over the corner bead and smooth it out.
Sanding Once the compound is dry, sand it smooth to blend with the wall.
Painting After sanding, apply paint to match the rest of the wall.
Benefits Rounded corners are more durable and less likely to chip than sharp edges.

This post will discuss the practice of rounded corners in your house and the reasons it goes beyond simple aesthetics. We’ll explore the useful methods and decorative advantages of rounded corners, from improving safety to introducing a dash of contemporary elegance. Gaining knowledge about how to incorporate this small but significant detail into your building or renovation project can significantly improve the appearance and feel of your living area.

What will be rounded of the angle

Usually, there are two reasons to want to remodel a room’s corners and give them a rounded shape: either to make the interior look strange and distinctive, or to lower the possibility of accidents. Turning corners will actually make moving less difficult if there are young children or elderly residents living there.

Adults will find it no less convenient to stroll around the house, particularly if they have to rush around all the time. Rounding angles can be used to address the issue of unsightly joints, which are frequently present where the grooves connect. It is possible to conceal the "defective" site and add interest to the design by using rounded corners.

How can the wall’s joint be made round? The construction of gypsum plaster structures and the creation of columns or half-columns are regarded as rather complex options. Plaster is far more convenient for this kind of application.

Plastering allows for the smooth rounding of angles between the walls and ceiling as well as the wall joints. Such areas can be finished with skin, artificial stone, wallpaper made of wood or metal, decorative plaster, etc. D.

These areas of the room will draw attention right away, center the space, and serve as its "highlight."

Pros and cons of round corners

There are numerous benefits to designing the corners differently than the norm. These are the principal ones:

  • Unusual design, luxurious appearance;
  • special relevance for apartments with a large number of corners, an increase in aesthetics;
  • lack of need for special skills during decoration, simplicity of design;
  • protection of weaknesses from destruction;
  • Reducing the danger of bruises, blows.

The drawback is that only in the areas that were constructed with drywall does the need for additional decoration and strengthening of round angles apply.

In the event that the joints’ installation and design were done incorrectly, they will remain susceptible and might need to be repaired again soon. Furthermore, not all design choices work well with rounded corners, so each room’s interior needs to be carefully considered before proceeding.

Materials and tools

It is imperative that you buy all required equipment and supplies before, or even before, work begins to avoid disruptions. You’ll need paint, primer, putty, and plaster, among other materials. Additionally, you ought to cook:

  • sandpaper with different granularity;
  • spatulas;
  • container for breeding plaster;
  • construction mixer;
  • grinder;
  • roulette;
  • construction level;
  • pencil;
  • rule;
  • punch;
  • boards, wooden bars;
  • metal profile;
  • screwdriver;
  • electrolobian or manual saw;
  • brush.

Should the decision be made to work with drywall, you will need to purchase the GKL profiles, sheets, and self-tapping screws on your own. You will need a ladder or a regular, sturdy table to work at the height. Use of respirators, gloves, and glasses is considered personal protective equipment.

Work technology

Although installing rounded corners involves many subtleties and features, even a novice master can complete this task.

Preparatory events

Measure things out to start the preparation process. First, measure the desired future angle’s radius (usually 10–30 cm), and then mark the appropriate locations on the floor and ceiling. On the walls, flat vertical lines are drawn between the marks to show where the rounding starts and ends. Make sure to use a level to verify the accuracy of the applied marking; if not, the angle may be processed incorrectly.

Dicking the corner

Among the most responsible stages is this one. Its purpose is to cut away any overhanging material so that the corners are smooth and ready for plastering. Grab a grinder, turn it on, and carefully cut each corner one at a time. Using the vertical lines that have been applied to the sides as guidelines, make incisions across the entire vertical surface.

It’s crucial to remove the plaster only on top, avoiding contact with the brick or concrete at the wall’s base. At this point, caution is crucial. Furthermore, you will need to plaster walls again after the boundaries are secured on one side or the other.

Plaster layers are separated and then beaten off following the notches made by hand or by a perforator. Using a grinder, the metal reinforcing elements are removed. In an effort to give them the most rounded appearance, bricks that protrude strongly are also chopped off.

Padding

Priming is necessary to bind the residual dust, improve adhesion, and fortify the walls following the pounding of the previous plaster. Make use of premium deep penetration soil. The instrument ought to have good penetration, even in the tiniest fissures.

After processing the entire surface, apply a primer using sweeping brushstrokes, allow it to dry, and then repeat the priming. Spraying the dirt or removing the walls from the bottle are further options.

Creating a template

To remove a round angle perfectly flat, a template is required. Without it, it will be challenging to give the wall joints the right shape. The following is the process for creating the template:

  • They take a wooden board, draw a right angle on it, inside with the help of a compass and a pencil, the required radius of rounding is indicated (it should coincide with the marks left on the walls);
  • If the compass is not available, make its semblance from the profile and pairs of self -tapping screws (the latter are screwed at a distance of 20 cm from each other);
  • Cut the angle in the board with a jigsaw, the ends of the boards are thoroughly faded with small sandpaper, giving them smoothness;
  • The bars are shredded perpendicular to hold the structure.

Staining the template

In order to allow the wooden template to get wet and swell, the plaster is kneaded over water. It needs to be painted in two layers using any thick tree paint to prevent this. Special consideration is given to the edges because moisture can easily cause them to deteriorate.

Finishing work

The log cabin in the corner is smoothed using the completed template once more before direct plastering begins. It is located on the upper portion of the junction; make a note where the perpendicular part touches the object. Move the template to the center of the intersection and make a comparable mark. Afterwards, they also move in the corner’s lower portion.

Following the markings, a vertical line is drawn, and the profile is screwed along it. You won’t have to worry about the template shifting sideways when you move it. Slide the template inside the profile’s bounds and assess how easy it is to slide. The product shouldn’t cling to the corner if everything was done correctly. A grinder is used to remove the areas that are interfering.

Plaster is bred in compliance with the guidelines. Using a cell or spatula, they liberally apply it to the joint and surrounding walls. The mixture is then "cut" using a wooden template and a compacting solution, going from top to bottom. The angle should stay smooth, rounded, and even after the excess has been removed. Transverse bars are cut from the template to avoid closely interfering with the horizontal bases when decorating areas close to the floor and under the ceiling.

Any room in the house can benefit from the softness and elegance that round corners provide. In addition to their attractive appearance, they provide various useful advantages. Round corners make a space safer by removing sharp edges, particularly in homes with young children or elderly residents. The gentle curvature reduces the possibility of mishaps and injuries brought on by unintentional knocks or collisions.

Moreover, rounded corners can help create a more harmonious energy flow in the room. Sharp angles are thought to produce stagnant energy, or "sha chi," in Feng Shui philosophy, which can cause uneasiness or discomfort. Choosing rounded corners will encourage a more fluid flow of energy, which will improve your home’s general calm and well-being.

Round corners are versatile and creative from a design standpoint. They can soften a space’s aesthetic and increase its sense of coziness. Whether you’re building a cozy cottage or remodeling a modern apartment, adding rounded corners can add a distinctive architectural element that makes your space stand out.

There are a few approaches to take into account when it comes to the practicalities of creating rounded corners. Using bendable corner beads composed of metal or vinyl is one choice. Round corners can be seamlessly integrated throughout your home with the ease of installing these beads during the drywall finishing process.

Alternatively, there are tools available specifically made for rounding off sharp edges if you’re looking to retrofit existing corners. You can give your interior design a new lease of life by converting plain square corners into graceful curves with the correct tools and methods.

In conclusion, adding rounded corners to your house will improve its appearance and usability. They offer countless design options in addition to making the space safer and encouraging positive energy flow. Rounded corners can add style to any living area, whether you’re going for a more traditional or modern aesthetic.

Video on the topic

Cold and wet corners of the house. The root cause

Why no one knows about this function of the caliper?!

How to do ventilation in the kitchen #168

Make a round, rounded plaster angle, rounded, round corners in the apartment plaster

Training earlier and now #batya #dad #training #nuts #vitalyaorehov #earlier

Remember this trick for refinement punch for even drilling

What color, in your opinion, is able to make a person happier?
Share to friends
Alice Chernyshev

Artist with 15 years of experience, color solutions specialist in interior design. I am in love with the world of colors from childhood, I am happy to share my knowledge and experience.

Rate author
Design-Estet.com
Add a comment