Technical characteristics and technology for using the Desmocol glue

Because of its outstanding adhesive qualities, desmocol glue is widely used in a variety of commercial and industrial settings. This multipurpose polyurethane adhesive is highly prized for its robust bonding properties and longevity, particularly when applied to materials such as rubber, leather, and synthetic textiles. To get the best results, it is essential to comprehend its technical properties and appropriate application techniques.

The remarkable flexibility of Desmocol glue is one of its primary characteristics. This characteristic makes sure that bonds hold even when stressed or when the materials being adhered move. Desmocol glue is also suitable for environments with water, oil, and other chemicals present because of its resistance to these substances. Its dependability in tough circumstances is further improved by its high tensile strength.

Several crucial steps are involved in the technology of using Desmocol glue in order to guarantee a solid, long-lasting bond. It is imperative to properly prepare surfaces; they must be dry, clean, and devoid of any impurities. Other crucial elements include evenly applying the glue and giving it enough time to cure. Depending on the particular needs of the project, the adhesive can be applied in a variety of ways using both hot and cold bonding processes.

It is important to follow safety precautions when handling Desmocol glue. Wearing protective gloves to prevent skin contact and ensuring adequate ventilation are essential during application to prevent fume inhalation. Through adherence to suggested usage guidelines and comprehension of the product’s characteristics, users can efficiently employ Desmocol glue for an extensive array of uses, guaranteeing the bond’s durability and performance.

Characteristic Description
Composition Desmocol glue is a polyurethane-based adhesive.
Color Usually transparent or slightly yellowish.
Viscosity Medium to high, making it easy to apply.
Drying Time Generally dries in 1-2 hours.
Full Cure Time Takes about 24 hours to fully cure.
Application Temperature Apply between 15°C and 25°C for best results.
Usage Commonly used for bonding leather, rubber, and various fabrics.
Surface Preparation Ensure surfaces are clean, dry, and free from grease.
Application Method Apply a thin, even layer on both surfaces, wait for a few minutes, then press together.
Storage Store in a cool, dry place, away from direct sunlight.
Safety Use in a well-ventilated area and avoid contact with skin and eyes.

Composition and characteristics

An organic diluent modifying additive called polyurethane tar is included in the composition of the shoe professional desmocol adhesive. The instrument forges a robust bond between different materials. It is advised to use the adhesive solution when gluing rubber, thermoplast, tissue, and polyvinyl chloride.

Additionally, Desmokol is chosen for products gluing polyurethane. However, the primary purpose of leather product repair remains. Even so, glasses, metal, and plastic glue too well.

To strengthen the part, the composition can be poured into the PVC sole.

It is advised to use the adhesive solution when gluing rubber, thermoplast, tissue, and polyvinyl chloride.

Advantages and disadvantages

Numerous advantageous characteristics of Desmocol shoe glue contribute to its popularity. Among the benefits of selecting glue are the following points that stand out:

  • The transparency of the layer, so the seam will not be noticeable against the background of any product;
  • Water resistance can be used when gluing parts with humidity up to 25%, therefore it is often selected for repair work with rubber boats;
  • The film covering after drying withstands low temperatures;
  • The coating is characterized by good elasticity, so it copes with mechanical stress;
  • It is convenient to use the adhesive solution, there is time to adjust the position of the parts before the layer hardening, for some time a plastic condition remains.

Numerous advantageous characteristics of Desmocol shoe glue contribute to its popularity.

The form of release

There’s no need to buy a lot of supplies if you plan to use glue at home. This results in the production of small tubes with 50 ml of glue; a larger container holding 1 liter can also be used. The manufacturer provides barrels with 20 and 200 liters of capacity simultaneously for industrial use.

Granules made of dysmocol glue are also produced. To achieve the required liquid consistency, these granules should be diluted with acetone or another kind of solvent. Granules to solvent are mixed in a 1 to 10 ratio.

Granules can only be mixed with a pure solvent to preserve the product’s qualities.

There’s no need to buy a lot of supplies if you plan to use glue at home.

Application rules

The application technology of adhesive dysmaco is explained in the manufacturer’s instructions. However, there are three ways to use the product at the same time; the method selected depends on the task and the material’s characteristics. The features of each method are listed below.

The usual way

Because standard shoe repair is so straightforward, it is typically chosen for domestic settings. However, surface cleaning must come first. If there are fat spots, then all kinds of dirt must be removed.

Following a surface that has dried, a thin layer of glue is applied using a brush or neatly straight out of the tube. They then wait ten minutes to remove the layer. Once a fresh layer has been applied, you can tightly press the two pieces together by combining them.

When using heating

Further surface heating can be used to improve clutch reliability. Surfaces should also be thoroughly cleaned to remove fat and grime. After applying the adhesive layer and waiting ten minutes for it to solidify, the base needs to be heated using a hairdryer. It is advised to heat the area to 80 degrees.

Wet method

Using moisturizing is a good way to boost the strength of the renewal of the bases. The details are submerged in the water to properly hydrate them after they have been thoroughly cleaned. On the sole, a thin coating of adhesive solution is applied. The details are worth waiting for the glue to dry before pressing. This technique for using jade glue is thought to be the most efficient.

How to pour and how to dilute glue

Although polyurethane Desmocol glue is typically applied in a liquid state, there are situations when using the granule version is more practical. However, in order to use them, a working solution must be made by combining them with a solvent. It’s crucial to understand the guidelines for blending the solution if you want a high-quality consistency without sacrificing the product’s qualities.

Therefore, in order to obtain the required glue characteristics, the granules must be diluted in acetone; it is crucial to use a clean type. The ratio of 1 to 10 represents the amount of dilution. Thus, 200 milliliters of solvent will be required for 20 grams of glue granules.

Granules must be poured with a precise amount of acetone and left in this condition for eight hours. After this period of time, a colorless heterogeneous liquid forms; to obtain a homogenous mass before using, the solution must be thoroughly mixed.

According to the manufacturer, if the composition is left in a room with temperature indicators of +25–30 degrees, the granules will dissolve more quickly.

You can transfer the mixture into a standard plastic bottle, but to prevent the composition from freezing, make sure the container is hermetically sealed.

Therefore, in order to obtain the required glue characteristics, the granules must be diluted in acetone; it is crucial to use a clean type.

Storage and safety measures

Read storage guidelines to preserve glue’s qualities and for your own safety. Therefore, it is not worth storing the product near heating appliances; +20 to +25 degrees is the ideal temperature range. Twelve months have passed since the date of production.

All of the composition’s properties won’t disappear after a year, but the quality will still decline. Since the tool poses a fire risk, it is not permitted to have glue near an open fire source. The storage room should have adequate ventilation. If the container is transparent, you should store the glue somewhere that is out of children’s reach and dark.


If buying Desmocol glue is not an option, you may want to look into three other options that are comparable in terms of characteristics: NAIC, I-900, and SAR-306. It is appropriate to use the first analog nail glue for attaching leather and textile materials.

Resins and rubber material are included in SAR-306, which works as a strong glue for all skin types. Take note that this clutch level is superior to Narit’s and can be chosen for PVC product glue. I-900 is notable for its strong resistance to humidity and acidic materials.

Additional tips and recommendations

Therefore, professional advice should also be considered in order to apply glue dysmacol correctly:

  • It is better to mix the granular type of glue with pure acetone, the ratio is measured accurately, ten parts of acetone must be added to 1 granules. The dissolution occurs in 8 hours, the process can be reduced by a couple of hours if the temperature is +25-30 degrees. It will be necessary to mix the solution well to get a homogeneous mass;
  • If the subject during operation is often subjected to high humidity and mechanical influences, then the strength of the seam is increased, you can introduce a special addor to adhesive, the amount of additive should not be higher than 5-7% of the total;
  • You can pour the glue into a plastic bottle, the mass will exert pressure, but not so strong that it bursts.

For shoe repair, the Dysmaco adhesive is essential because it works well for gluing leather materials together. Several additional materials that were mentioned above can be adhered to by the composition. The base must be thoroughly cleaned before adhering; the working principle is straightforward.

The outstanding versatility and bonding strength of Desmocol glue make it stand out. It is especially appreciated in sectors that need dependable and long-lasting adhesive solutions. Because of the glue’s technical qualities, which include its high tensile strength and exceptional flexibility, it can be used on a variety of materials, including leather, rubber, and different synthetic fabrics.

Desmocol glue is easy to use, but for best results, pay close attention to the details. It is crucial to prepare the surfaces by cleaning them and making sure they are dry. A strong bond is ensured by applying a thin, even layer of adhesive, letting it get tacky, and then pressing the surfaces together. It is advised to apply pressure to the bonded materials throughout the curing process for optimal results.

Overall, Desmocol glue is a recommended option for both professional and do-it-yourself projects due to its dependability and performance. Whether you’re working on other crafts, making custom leather goods, or mending shoes, knowing the right application techniques will help you get results that are strong and last. You can take advantage of Desmocol glue’s full potential for your bonding needs by adhering to the recommended procedures.

Shoes, upholstery, and auto repairs are just a few of the industries that frequently use desmocol glue, a flexible adhesive with strong bonding powers. Due to its exceptional resistance to heat, water, and different chemicals, it is the perfect material for long-lasting applications. The process of applying Desmocol glue is straightforward but requires accuracy: cleaning and prepping the surfaces, spreading the adhesive evenly, and allowing enough time for curing to guarantee a strong bond. For both professionals and do-it-yourselfers, Desmocol glue is a great option because of its easy application method and dependable performance.

Video on the topic

All about glue 🛑 for skin and eco -leather 😲 with ksyu

How good glue turns into super glue. Shoe repair | Shoe glue

An effective solution for gluing the edge using PUR glue-melting from Kleiberit

How to quickly and correctly seal shoes!?

Work with glue

What color, in your opinion, is able to make a person happier?
Share to friends
Daria Yakovlev

Interior designer, author of online color design courses. I will help you create a harmonious interior using color.

Rate author
Add a comment