Recipes for making glue based on foam, acetone, gasoline

Making glue at home can be a fun and economical project. A novel way to experiment with creating adhesives at home is by using everyday items like foam, acetone, and gasoline. When properly mixed, these components can create a robust, adaptable glue that works well for a variety of uses.

Foam is the foundation material and is frequently used in insulation and packaging. This becomes a sticky substance when dissolved in acetone. Gasoline improves the adhesive qualities of the mixture, increasing its effectiveness on various surfaces. Even novices can complete the simple, few-step procedure because it is so simple.

Although it may seem unusual to use these materials, the outcomes are striking. This kind of glue is especially helpful for crafts, repairs, and do-it-yourself projects. Because acetone and gasoline are flammable and should only be used in well-ventilated areas, it’s crucial to handle the ingredients carefully. Making glue at home can be enjoyable and useful as long as the proper safety measures are taken.

Where can be applied

Foam glue is useful in daily life for joining components and surfaces. As an illustration, consider gluing skirting boards, mending a kitchen set, connecting furniture, and installing the most extruded polystyrene foam.

Carpenter’s or casein glue can be used in place of the completed solution.

The completed seam has a 1.5-year load bearing capacity.

Making glue out of foam, acetone, and gasoline is a useful and affordable fix for a lot of do-it-yourselfers and pros. This DIY adhesive is simple to make with everyday items and provides a strong hold for a range of uses. We’ll walk you through easy recipes and detailed instructions to make this multipurpose glue in this post, along with usage best practices and safety advice.

What is needed for cooking

Solvent and polystyrene are the principal ingredients. In comparison to store-bought compositions, this method is less expensive and yields a more dependable outcome.

Along with the items on the list, you also need to get ready for:

  • pure metal container (preferably a canister);
  • gloves for hand protection;
  • home fan;
  • shoulder blade or stick for thorough mixing of the composition.

When making a solution for the first time, it’s best to start small, like in a regular half-liter glass jar. Should you prepare a lot of mixtures, the home fan that comes with it will prevent you from getting burned. Wearing protective gloves will shield the hands’ skin. Picking benzene or toluene is preferable among the solvent types. They cannot be used simultaneously. The adhesive composition of a substance may become toxic due to an increase in toxicity.

Which foam to choose

It is preferable to use foam from home appliance packaging, the remaining heat-insulating layer from an old refrigerator, or a portion of sheet insulation. Baby is also appropriate. Given that gas makes up 95% of its composition, there ought to be a lot of substance itself. Among the fundamental prerequisites, it is imperative to emphasize:

  • the purity of the material (without dirt, dust, other residues);
  • rejection of materials for thermal insulation of underground utilities, in which there are fire supplements and a specific smell.

Everything needs to be ground into a powder before use. This holds true for polystyrene as well. Before adding polystyrene and gasoline, you must first combine chopped polystyrene with a small amount of acetone.

Styrene and freon, two gases released during cooking, have no effect on the composition’s efficacy but can cause poisoning if inhaled.

It is preferable to choose foam in the resident itself (in the form of connected balls that crumble and break easily). It dissolves most readily in gasoline and acetone to form an adhesive mixture.

Than to dissolve the foam to get glue

While practically any kind of solvent can be used for the task, acetone or pure gasoline (A-95) are the best options. Ideal for p646 or nitro paints.

In situations where there is an excessive concentration of fuel alcohols, such as kerosene, it is preferable to refuse to dissolve with ethy varieties and gasoline with dietary supplements.

  • Can be dissolved Vietnamese gasoline. It is effective, safe. Has an acetone.
  • You can use it yourself Acetone or dichlorestan. The second option is dangerous of its toxicity, but firmly glues any plastic surfaces.

A prepared mixture of acetone and foam will have a softer, more flowing consistency. This facilitates more consistent application.

How to make foam glue at home

The container in which the glue will be prepared must be cleaned and completely dried (it is preferable to dry in the sun). Only after the gas bubbles in the solution stop sticking out can you glue the surfaces.

Recipe No. 1 – PEACH and gasoline

Pour a portion of the crushed pieces into the container after adding a tenth of the prepared solvent or gasoline to the bottom. Mix well. Three times more should be the dry composition. For instance, 10 g of diluent and 30 g of foam chips.

Everything is combined and allowed to dissolve fully. Additionally, the foam can be added in tiny pieces and thoroughly mixed into the final product. It is best to add acetone or gasoline in small amounts at a time afterwards.

It should come out as a composition with a viscous stretching consistency similar to thick jelly or shoe glue.


In order to create this kind of solution, you must first dilute the nitrolak with acetone, then mix in the crushed foam bit by bit. The technique works better for waterproofing surfaces—for instance, when processing roofing material holes. The method of cooking is the same as with the earlier choice. The mixture can be applied to floors, steps, railings, and crack closure if it is made to the consistency of liquid sour cream.

The outcome will resemble putty more closely if nitro painting is used in place of nitrolak, and it might crack after drying. Metal fences and wooden fences are covered with such a protective agent.

Applying crushed foam powder to the surface that needs to be glued is an additional option. To apply a solvent, cover everything with synthetic fabric and use a brush. Using a rubber roller, the completed layer is thoroughly rolled. The foam crumb ought to dissolve under the solvent’s influence in a matter of seconds. The fabric itself ought to stay where the glue is applied. The components need to be firmly compressed together after being joined.

Ingredient Amount
Foam Small pieces
Acetone Enough to dissolve foam
Gasoline Optional, small quantity

For a variety of bonding applications, foam, acetone, and gasoline can be combined to make glue that works well and is reasonably priced. Using the dissolving qualities of acetone and gasoline, this do-it-yourself method turns foam into a sticky, adhesive material. Because the materials involved are flammable, even though the process is straightforward, it’s imperative to take safety precautions.

Craft projects and home repairs can benefit greatly from the use of these homemade glues. They are practical and versatile because they can be applied to a variety of surfaces and offer a strong bond. To prevent mishaps, make sure you’re working in an area with adequate ventilation and away from open flames at all times.

To put it simply, making glue out of foam, acetone, and gasoline is an affordable method of making a trustworthy adhesive. This technique can be a useful addition to your toolkit if you follow the proper safety precautions and find it to be a convenient solution for many common adhesive needs.

Video on the topic

Foam paint where you can use.

Liquid foam. Preparation, use as a protective coating. The first impressions.

The remaining foam is no longer thrown away! Super glue with your own hands!

Foam glue is true

All about foam glue. The advice of a homemade man.

Foam glue. Tests. How to make glue and what is capable of.

Homemade glue from gasoline and foam. Perfect glue for wood

What color, in your opinion, is able to make a person happier?
Share to friends
Daria Yakovlev

Interior designer, author of online color design courses. I will help you create a harmonious interior using color.

Rate author
Add a comment