Technical characteristics and rules for working with OSCAR glue for fiberglass wallpaper

OSCAR adhesive, renowned for its durability and dependability, is a widely used adhesive option for applying fiberglass wallpaper. To get the best results when using this glue, it is essential to comprehend its technical properties and apply it correctly. You will be guided through all the necessary steps in this guide to guarantee a seamless and fruitful wallpapering project.

Fiberglass wallpaper is a popular option for both residential and commercial spaces due to its strength and ability to reinforce walls. But because of its particular makeup, it needs a specific adhesive, such as OSCAR glue. This glue’s formulation ensures a strong, long-lasting bond with the fiberglass material.

The quick setting time of OSCAR glue is one of its best qualities. This expedites the process by allowing you to install wallpaper without having to wait for extended periods of time. The glue also provides outstanding resistance to moisture and temperature changes, which aids in preserving the wallpaper’s integrity over time.

It’s crucial to adhere to certain instructions in order to get the best results when using OSCAR glue. Make sure your walls are dry, smooth, and clean before beginning. For a strong adherence and to avoid bubbles, the glue must be applied evenly and in the proper quantity. Applying the product correctly can also have a big impact. Some examples of these tools include a good brush or roller.

Gaining an understanding of these technical specifications and guidelines for application will enable you to get the most out of OSCAR glue for fiberglass wallpaper projects. You can have a beautifully finished wall that endures with the correct planning and methods.

Characteristic	Details
Type	Acrylic-based adhesive
Usage	For fiberglass wallpaper
Application Temperature	Between 10°C and 25°C
Drying Time	24 hours
Tools	Roller or brush
Surface Preparation	Clean and dry
Coverage	Approximately 4-5 m² per liter
Cleaning	Soap and water before drying
Storage	Store in a cool, dry place

Advantages of glue

According to European standards, OSCAR glue water-dispersed composition with an acrylic base was developed in Russia for the purpose of adhering glass chicks and glass wallpaper, with additional coloring applied to the paintings.

Conveniently, OSKAR adhesive composition is applied to the base rather than canvases; its high elasticity allows for easy wallpaper positioning during the gluing process. Moreover, the following benefits are mentioned:

• After drying, the layer becomes colorless, which makes it invisible;
• The speed of breeding for application, mix the mixture in cold water, the solution swells in 10 minutes, the lumps are quickly stirred;
• Universal use, Oscar glue can be used for various wallpapers, as well as for gluing on different materials;
• The composition includes an antiseptic substance, which allows protection from the fungus and mold;
• The consumption is low, 350 grams are required for processing 1 kV/m of the surface, for the preparation of 100 grams, the dry mixture is mixed with 3 liters of water;
• Safety for people and animals.

The final solution has a 60-day shelf life when stored in a tightly closed container.

Conveniently, OSKAR adhesive composition is applied to the base rather than canvases; its high elasticity allows for easy wallpaper positioning during the gluing process.

With its unique formulation, OSCAR glue is an excellent adhesive for fiberglass wallpaper that is also very easy to use and durable. Understanding its essential qualities—such as its strong bonding abilities, short drying time, and resistance to moisture and temperature fluctuations—will help you get the best results. To properly secure the wallpaper when using OSCAR glue, make sure the surfaces are clean and dry before applying the glue and give it enough time to dry. For your fiberglass wallpaper projects, this guide will help you navigate the technical aspects and application guidelines to ensure a smooth and long-lasting finish.

Compound

The glass glue offered for sale by OSCAR is finished and dry. The following materials are present in the composition of both options:

• PVA;
• Latex;
• Modified starch;
• Antiseptic substances.

Properties of glue for fiberglass Oscar

Increased surface adhesion to guarantee the appropriate degree of fixation for heavy paintings characterizes the finished type of glue. A dry mixture is produced using various containers. There are options for bags that weigh one or ten kilograms. There are also small cardboard boxes that weigh between 200 and 400 grams.

Five and ten liter buckets containing the completed solution are available. If the seal of the container is not broken, you can keep the solution in storage for three years.

Increased surface adhesion to guarantee the appropriate degree of fixation for heavy paintings characterizes the finished type of glue.

Technical specifications

The layer’s vapor permeability is what distinguishes glue for an Oscar web. Customers emphasize the composition’s ease of use for the following reasons:

• Produced in different types of containers;
• There is in a finished and dry form;
• To smoothly place the canvases on the basis, there is 15 minutes in stock after applying the product;
• Drying lasts two hours, and this allows you to complete the repair quickly;
• The product does not smell, harmless to people"s health;
• High degree of adhesion.

Working rules, tips

One of the product’s advantageous features is the ease of use in applying glue. The steps below should be followed in order to prepare the mixture’s solution and apply the wallpaper:

1. The required amount of water is poured into the prepared container, stirring begins to form a funnel. The mixture is gradually poured. It should be interfered with about 10 minutes, the solution is considered ready when a homogeneous consistency is acquired.
2. Marking is made taking into account the size of the wallpaper and area, cut under the parameters of the strip.
3. You need to apply glue only to the walls, the strips are not required to spread.
4. It is necessary to apply glue to the walls peeled from old canvases, dried, it is recommended to disgrace the base in advance.
5. Glue should be distributed with a thick layer, in a thickness of about 1.5 mm, then the means can hold heavy canvases.
6. Transfer strips to the base, with the help of a roller, leveled the canvas, and knock out air and excess glue.
7. If they are going to stain the surface after, then they expect three days before moving on to painting.

You should avoid opening windows while the wallpaper is drying and try to work in temperatures between +18 and +22 degrees.

We proceed to gluing wallpaper

Use a brush or a roller to apply OSCAR fiberglass glue only to the surface. Applying the solution to the canvas’s width will result in a small supply.

The front side of glass wallpaper is rolled inward.

Using a plastic spatula, you can smooth the transferred strip onto the surface, starting from the center and working your way outward, covering the edges. You have roughly twenty minutes to move the wallpaper. The first lane should be adhered to uniformly since it will serve as a model for the remaining lanes.

Gluing uneven internal or external angles

Gluing is done one side at a time, with an uneven outer angle. The right portion is first cut off along the corner and one side is adhered to the other. Subsequently, they also behave on the opposite side and wallpaper strip. When a problem arises, the most common type of cryptoviruses are those that amplify the amplitude of the signal on the surface.

The canvas is glued on the inner corner, with a maximum 2-cm bend on the second side of the entry. A plumb line is used to monitor the vertical gluing, which is an important task. Overlapping glue is applied to the other strip along the angle.

Instructions for use

In order to obtain exquisitely adhered wallpaper, they adhere to the regulations of every phase. First, get the tools ready:

• Container for the preparation of the solution;
• Rolls and a wide brush for applying an adhesive;
• Wooden blade for mixing the mixture;
• A rag that will help remove excess glue;
• Plastic spatula to open the canvas;
• Sharp knife;
• Ladder;
• Latex gloves.

Preparation of walls

The base is ready to ensure good adhesion and a beautiful appearance for the canvases. First, dust and debris should be removed from the surface. Poorly maintained plaster, an outdated finish, and whitewashing are removed. Additionally:

1. Seams, cracks are aligned with sandpaper.
2. The smooth base should be made rough.
3. You can align the surface with gypsum plaster.
4. After the base puts down and grinds.

Applying the primer is necessary at the end. Oscar glue, which becomes more liquid during breeding, can be used, or a latex primer can be selected. After the wall dries, you can start the glue process.

Preparation of the composition

It is necessary to prepare the glue in dry form for the glass-flowing wallpaper OSCAR beforehand. Pour a small amount of cold water into the container, stir, and continue to pour the mixture without stopping. After the solution has swelled for ten minutes, the composition starts to interfere once more.

Before using, the finished solution that was purchased must also be mixed.

Application of glue

When adhering glass, you must make sure that the layer is at least 0.5 mm thick for a consistent outcome. Apply the composition to the surface; it should be slightly broader than the canvas’s dimensions. Glue the stripes if necessary. After smearing the wall, immediately transfer the strip to the surface. After using a spatula to level the canvas, a rag is used to remove the glue that allows the product to pass through the material’s mesh.

When adhering glass, you must make sure that the layer is at least 0.5 mm thick for a consistent outcome.

Consumption

The instrument has a low consumption rate. If the completed mixture is utilized, a solution capable of bonding 50 kV of fiberglass material can be made with just 10 kg. Should they utilize non-woven wallpaper, there will be sufficient coverage for 66 square meters. It takes five kilograms of completed glue to process twenty to twenty-five kV.m. of surfaces.

Peculiarities

The Oscar’s composition’s latex foundation allows for precise control over the wallpaper’s placement. European standards are taken into consideration in production technology. Since the product can be used with various wallpapers, it is regarded as universal.

Because of its unique composition, the layer can dry quickly, withstand moisture, and shield the base from the growth of mold and fungus.

Useful recommendations

After drying, the product is completely safe, but to protect your skin when applying it, wear rubber gloves. To achieve a long-lasting and superior outcome, it is crucial to adhere to the glue’s instructions regarding the amounts and preparation guidelines.

Analogs of glue "Oscar"

You can use the following analogs if, for some reason, you are unable to locate or buy an Oscar for a fiberglass: optimist, Quelyd Optima, and Homakoll202. Each of them has advantages and disadvantages and can handle fixing heavy glass.

In the unlikely event that an Oscar for a fiberglass could not be found or purchased, analogs would have to be used.

A fantastic alternative for gluing fiberglass and other wallpaper kinds is Glue Oscar. The clutch’s dependability for a variety of reasons ensures that it will function for a long time. Because there are dry mixtures and ready-made solutions, we can make work easier for newcomers. Experts also point out how easy it is to apply; all that needs to be done is spread the glue on the base; messing with wallpaper covering is not necessary.

When applying fiberglass wallpaper, using OSCAR glue can greatly improve the wall’s durability and appearance. This adhesive offers a strong bond that guarantees the wallpaper will remain in place for years because it is especially made to meet the special needs of fiberglass wallpaper. Due to its high adhesive strength, rapid drying speed, and moisture resistance, it can be used in a variety of settings, including places with high humidity levels like kitchens and bathrooms.

To get the best results when applying OSCAR glue, there are some guidelines that must be followed. Make sure the wall surface is dust-free, dry, and free of previous adhesive residues before starting. Because it enables the glue to adhere properly, this step is essential. Next, use a roller or brush to evenly apply the glue, making sure to cover the entire area that will be covered by the wallpaper. Application consistency guarantees a smooth finish and aids in the prevention of air bubbles.

After the glue has been applied, carefully place the fiberglass wallpaper onto the wall, working your way down from the top. To ensure a tight fit and get rid of any bubbles, press the wallpaper into the adhesive using a wallpaper smoothing tool. Before putting any stress on the wall—like cleaning or more decorating—let the glue dry completely.

In conclusion, OSCAR glue’s strong bonding qualities and user-friendliness make it a great option for fiberglass wallpaper. You can achieve a professional-looking finish that improves the durability and visual appeal of your walls by using the suggested application techniques. To get the most out of this specialty adhesive, careful application and appropriate preparation are essential.

Video on the topic

Webinar of the Alaksar Group of Companies (11 part): Fiberglass Oscar, Wellton Optima and Wellton Decor.

Webinar Group of Companies "Alaksar" (3 part): Maular glass chlor reservoirs of Wellton and Oscar.

Special overlapping conditions with fiberglass wallpaper and painting glass chlor reservoirs

What layer of glue must be applied to the surface for reliable gluing of glass wallpaper?

How to properly dilute the OSCAR glue for priming the surface when finishing with glass wallpaper

How to properly dilute OSCAR glue for gluing glass, painting glass

How to properly dilute OSCAR glue for gluing glass, painting glass?

Webinar of the Alaksar Group of Companies (15 part): unique properties of OSCAR and Wellton glass wallpaper.