What paint you can paint the plastic surface

Although painting plastic surfaces can be a little challenging, it is entirely possible with the right paint. Knowing which paint to use is crucial for a lasting finish, whether you’re looking to customize plastic household items, update your outdoor decor, or revive old plastic furniture.

Selecting a paint that is made especially for plastic is important because not all paints stick to plastic well. Polymer-specific paints are designed to adhere to the smooth, non-porous surface, producing an end product that is both long-lasting and aesthetically pleasing. These paints come in a variety of colors and finishes, so you have a lot of choices to get the exact look you want.

When painting plastic, preparation is essential. Paint will adhere better and last longer on a surface that has been properly primed and cleaned. Any plastic object can be made into something fresh and colorful with the correct method and supplies.

General specifics of staining ABS and PVC plastics

The parameters of the plastic will determine the best staining method. However, you should always begin with the planning phase. A beautiful result can only be expected if the surface is carefully prepared. It is essential to select specific paints that can adhere to plastic because PVC paint adheres poorly to it.

Painting hard plastic is simpler because the dye can simply rub off on items that bend frequently. It is recommended to use elastic enamel when painting a soft surface.

Universal acrylic enamel is ideal for extremely hard products. We’ll provide more information later on paint models and other paints that can be used on plastic surfaces.


Understanding whether applying paint on plastic is possible in theory is vital to find the answer to this question. It is acceptable, but not for all types. After all, a variety of materials go by the common name "plastic."

It is impossible to tell what kind of plastic is available visually; all that is written on it are a few Latin characters.

The most widely used classification for plastic types in markings:

  • Polystyrene (PS), polycarbonate (PC), polyethylene (PE), polypropylene (PP) – cannot be painted;
  • ABS plastic (ABS) and PVC (PVC)-can be painted, but preliminarily a primer is required.

The majority of the time, automotive plastic can be stained; however, there are specific techniques for figuring out whether pre-primer application is required. Additionally, they ought to employ them:

  1. The object is lowered into the water, if it sinks, then the priming is not required, if not, then the product must be primed.
  2. A piece of pure plastic is taken and set fire to, if the fire is calm, then the object is primed. If there is a black stink, then this stage can be missed.

Selecting the appropriate paint is essential for painting plastic surfaces in order to achieve a finish that is both long-lasting and visually appealing. Choose paints made especially for plastic, like acrylic paints combined with an appropriate primer or spray paints marked for plastic, as not all paints stick to plastic well. Cleaning and sanding the surface properly guarantees that the paint adheres well, giving plastic objects a durable, new appearance.

Types of paints for surfaces made of plastic, which criteria to choose

A wide assortment is offered by plastic paint that is for sale. Examine all of their features to avoid becoming confused and select the best and most practical choice. After reading through all the details, decide how to paint the plastic with ease. The species that are most prevalent are explained below.

Acetone-based products can damage plastic, so they cannot be used.

Water -based compounds

Lacoclance materials, also known as acrylic enamel on water, are appropriate for coloring plastic items.

These coloring books are usually made of two ingredients:

  • The basis of the dye itself;
  • A hardener is a component that makes an acrylic enamel for plastic more reliable and well tolerating effects from the outside. This component is transparent, without smell.

Although ultraviolet light is unstable, it aids paint easily, lies, is stable, and maintains color brightness over time. It also has a pleasing aesthetic appearance. The only extra work needed when using these paints is surface pollution; priming is not necessary. Beautiful view for outside work.

Matte paints soft-up

Anything that their hands touch frequently should feel as good to the touch as possible. This kind works well for painting construction tools, plastic toys, furniture handles, phones, and cosmetic bags. This dye can give the subject an attractive appearance in addition to being comfortable to the touch and able to muffle light and sound.

It can be applied to different types of surfaces, but the right primer must be used for each type.

Because of its wear-resistant quality and capacity to cover vertical planes, it is frequently used for painting automobiles. It also has the effect of reducing angles.

This dye can give the subject an attractive appearance in addition to being comfortable to the touch and able to muffle light and sound.

Water polyurethane-acrylic paints in PVC

If a lot of work needs to be done, this type is utilized. They are not matte; rather, siding, panels, PVC profiles, window frames, and other items are covered with this paint on water-based plastic that contains acrylic and polyurethane components.

Differ in terms of stability and quality. The paint is non-sticky, waterproof, and leaves an enduring layer that protects the surface while giving the object elasticity and hardness. displays excellent performance during application and drying as evidenced by the products’ lack of adhesion to one another, the absence of defects from forming, and the preservation of their decorative qualities.

Since PVC is essentially free, paint is applied to make it look better. The coloring material’s composition is as follows:

  • The main acrylic paint of the required color;
  • Thick white or milk liquid, t.e. hardener, which can give, either bed tones, or vice versa bright colors (red, yellow, brown, green, generally any). It is possible to get an unusual texture, adding texture elements to the composition that will give the corresponding effect: wood, mirrors, plaster and others.

Aerosol paints for plastic

Many people think that spray can painting is something only experts do. In actuality, they find painting to be highly convenient because there is a wide variety of colors available and mixing the composition is not necessary. If someone chooses to stain plastic on their own for the first time, they will feel secure using an aerosol.

There are two types of paints produced by these spray cans:

  • The mentioned early software, which after complete drying is pleasant to the touch and slightly rough, which allows you to hide some disadvantages of the product. It is also a great option for giving the interior of a highlight;
  • Mona enamel, on the contrary, will give the gloss of the surface, it will sparkle in the sun, suitable for PVC.

It is simple to select the appropriate spray can from this selection for a specific use.

  • There is no need to buy brushes, rollers, etc.P.;
  • Easy to use;
  • The paint composition covers the product with an even and smooth layer;
  • With their help, you can reproduce any coating (mirror, metal, wood, etc.D.);
  • Retain brightness for a long time;
  • Subject to long -term storage;
  • Economical;
  • If they decide to apply to a different color, then it will be easy to paint over it.

Tools and materials for painting plastic

To achieve the desired results, plastic painting should be done continuously. As a result, it pays to have everything ready in advance. A small set of tools is required, and they are all reasonably priced. Thus, you’ll need:

  • Selected paint, calculate right away how much you need to paint all products, and prepare the resulting amount;
  • For the final stroke, varnish is needed, acrylic in spray cans is suitable;
  • It is important to protect yourself from falling paint, so protective gloves, mask, or special glasses are needed. Also note that it is better to paint on the street;
  • In order not to paint the excess, other surfaces are closed with a newspaper or film;
  • Masking or paper adhesive tape;
  • A bucket of water, cotton rags, a cleaning remedy;
  • White-Spirit or a solvent in a bottle;
  • Sandpaper (small);
  • If it is necessary to close small scratches, then a putty or a primer solution will be required.

You should wear protective gloves, a mask, or safety glasses to protect yourself from paint that may fall.

Conditions for successful staining of plastic

You should follow the guidelines below in order to achieve a long-lasting, evenly applied layer with a pleasing decorative appearance:

  • The subject should be clean and dried;
  • Initially, a primer solution should be used for this material with high clutch rates. Apply a primer, spraying, or wiping, wait complete drying out.

Adhere to the following guidelines for the best paint fixation:

  1. Air temperature is possible only from 18 degrees higher than zero, humidity not exceeding 80%;
  2. The temperature degree of the product and the paint itself is made equal.
  • They work, applying a dye with one layer of 60-120 micrometers. Excessively the thin layer will reduce stability, and dense will increase time for drying, which can also affect the aesthetic result;
  • The process of drying the product occurs at temperature mode from 18 to 60 degrees. Temperature accuracy is determined by the thickness of the layer;
  • The drying process will end only after 5 days, a week. The more humid air around, and colder, the longer the drying stage will end. Important! Before polymerization, it is not advisable to expose the surface of cold and strong humidity.

Plastic staining at home

You can handle painting plastic materials yourself, which will save a lot of money. Professional appeal comes at a very high cost. If you want to work from home, you will need to ensure your own safety by setting up safety equipment, gather all the tools you’ll need (which are mentioned above), and complete every step of the project. They will be covered in more detail later on.

You can handle painting plastic materials yourself, which will save a lot of money.

Methods of painting

Either banks or aerosols are used to produce the paint coating. The size of the product and the painting contractor’s experience will determine which option is best.

    The spray cans are more appropriate with a small object of painting, it is not difficult to work with them, but before starting you should try, spraying a little paints on an unnecessary surface, this will help to understand how best to spray to get the desired result. In general, the aerosol method will give a good even coating. This method does not allow you to mix tones, and thus it will not work to apply clear color boundaries.

Although a roller is not often used, the procedure can reduce the need for a spray gun. Working with a spray can will be a more suitable method for a beginner.

Preparation of plastic for staining

As previously mentioned, in order to achieve a superior outcome, you should meticulously prepare the product before beginning work. The following actions are part of this stage:

  1. Get rid of the previous cladding, you can use the skin, solvent, construction hairdryer.
  2. Get rid of pollution.
  3. The product must be degreased by using the solvent for this.
  4. Process the product with antistatic.
  5. If required, put a putty.
  6. To ensure good adhesion, the surface is treated with emery no more than NO180, after the completion of this stage, the object is again cleaned and dried.
  7. Degeneration is again carried out.
  8. Carry out primitive work if required.
  9. Grind and clean again.

Plastic staining technology

After deciding on a coloring tool’s appearance, it’s important to address the work process. The article will break down two technologies: aerosol application and brush staining.

Using a brush, they create broad, straight strokes. At first, they move the brush gently, then apply more pressure to thin the coating. Finally, they make a final, soft bar for alignment. If everything is done correctly, one brush stroke should be sufficient.

  • The brush should not be dipped entirely, enough the tip;
  • You should strive to make the layer as thin as possible, pressing on the bristle;
  • Keep the slope of the working position of the brush.

Using a brush, they create broad, straight strokes by moving the brush gently at first and then applying more pressure.

The steps involved in using a spray can:

  • Put the product on a flat surface, for example on a chair, make marking the painted part with paper tape, close the lying objects are closed (with a film, a newspaper, paper);
  • Previously, it is necessary to shake the aerosol;
  • The subject should remain 20-30 centimeters;
  • Spray with paint smoothly in one layer, holding the cylinder straight;
  • For complete staining, it is worth making two or three layers;
  • Between applying the layers, the time indicated on the package is waited before drying;
  • After completion of work, tape is immediately removed.

Once the item has had time to dry, you can apply varnish to it to make it more resistant to wear. both when staining and when acting.

One excellent way to revitalize and breathe new life into old objects is with plastic paint. The abundance of colors makes it possible for you to create a multitude of décor options. You can perfectly decorate your home yourself because they use all of their imagination and the tools required for the process before dying the plastic.

Paint Type Advantages
Acrylic Paint Dries quickly, easy to apply, good for indoor use
Spray Paint Provides even coverage, ideal for small projects, various finishes available
Oil-Based Paint Durable finish, suitable for high-traffic areas, resistant to chipping
Latex Paint Water-based, easy clean-up, low odor, quick drying

If you use the proper paint, painting plastic surfaces can be an easy and satisfying project. It is essential to comprehend the characteristics of various paints and their interactions with plastic in order to achieve a finish that is both durable and smooth. Choose your paint carefully because not all paints stick to plastic well.

Acrylic paints are a popular choice because of their ease of use and versatility, as they are specifically formulated for plastics. They come in a variety of colors, offer good coverage, and dry quickly. Another great choice is plastic spray paint, which requires little work to achieve professional-looking results and even coverage.

The secret to a good paint job on plastic is preparation. Paint adhesion can be greatly increased by thoroughly cleaning the surface and lightly sanding it. To ensure a long-lasting finish, using a primer made for plastic surfaces can also help the paint bond better.

Plastic items can be given a new and improved appearance by carefully choosing the paint and prepping the surface. Painting plastic surfaces creates a plethora of opportunities for crafts and home renovation projects. To ensure optimal outcomes, heed the manufacturer’s instructions and relish the rejuvenating process of your plastic items.

Video on the topic

Painting plastic with a can

310. Professional paint for plastic. Paint polyethylene and polypropylene finishes for MDF.

Autop 3 | How to paint the plastic parts of the car correctly? | Soil-filler for plastic

Show three types of structural paint for plastic.

Autop 4 | How to paint structural plastic? Technology for applying structural enamel on car plastic

Autop 5 | How to paint car plastic and moto soil enamel? DIY PLACING WITHOUT PLACK

What color, in your opinion, is able to make a person happier?
Share to friends
Daria Yakovlev

Interior designer, author of online color design courses. I will help you create a harmonious interior using color.

Rate author
Add a comment