The scope of application and the procedure for applying a primer Ceresite ST 16

Primers are essential for maintaining the durability and caliber of paintwork. Ceresit CT 16 is one of the most adaptable and dependable primers on the market. Professional painters and do-it-yourselfers alike favor Ceresit CT 16, which is well-known for its superior adhesive qualities and user-friendliness.

Ceresit CT 16 is primarily used to prepare surfaces for additional painting or coating. It strengthens the bond between the substrate and the paint layers that come after, increasing durability and avoiding flaking or peeling. This primer is a go-to choice for many different projects because it works especially well on a range of surfaces, such as brick, plaster, and concrete.

Ceresit CT 16 is easy to apply, but for optimal results, it must be done according to the right protocol. To begin with, make sure the surface is dust- and material-free, clean, and dry. Apply the primer evenly over the surface using a brush or roller. Usually, it takes a few hours for it to completely dry before applying the next coat or layer of paint.

Applying Ceresit CT 16 enhances paint adhesion and contributes to a more consistent finish. It can efficiently seal porous surfaces, lowering the amount of paint required and improving the final coat’s overall appearance. The results of your painting project will be substantially enhanced if you use this primer, regardless of whether you’re working on new construction or home renovations.

Properties of the material

Ceresit CT 16 primer is a range of water-dispersion finishing materials designed to prime the surface for further decoration. This brand’s soil is all-purpose; it works well for both interior and external projects and is perfect for decorative plasters and facade paints. The durability and dependability of the coating service are ensured by the application of soil.

The material’s characteristics and attributes are as follows:

• improvement of adhesion indicators – clutch with other coatings;
• optimization of the process of applying the finish coating;
• providing protection against moisture – the surface acquires moisture -repellent qualities;
• Deep penetration into previous layers during finishing work.

The material’s angezia is enhanced by the entry of mineral (quartz) sand, which contributes to the roughness of the surface. The soil has no strong, disagreeable smell, is safe for the environment, does not contain solvents, and does not reduce breathability. The user will find it highly convenient that it is fully operational and ready for use. Five or ten kilograms of soil are contained in the packaging; a smaller capacity costs roughly 500 rubles.

Primer characteristics

The product’s standard color is white, but tinting pigments can be added in accordance with the manufacturer’s card (colored primers are made to order). If you need to tint a primer Ceresit ST 16 for plastering work with colored plaster, you can also do it yourself.

The following is a description of the material’s technical properties:

1. Structure – thick, homogeneous, without extraneous inclusions.
2. The temperature when applying a product +5 … +30 degrees, relative humidity – not more than 80%.
3. Drying of one layer – 3 hours.
4. The density of the product is 1.5 kg/cube. Dm.
5. The speed with which the surface will absorb a primer – less than 0.5 kg/sq. m./hour*0.5.

Consumption of the product

It is important to understand the consumption rates for 1 m2 before treating surfaces indoors or outdoors. This will assist in getting the appropriate quantity of primer. The consumption, which ranges from 200 to 500 milliliters per square meter, is largely dependent on the surface’s capacity to absorb water.

The scope of the primer

Priming different bases, such as concrete, mineral coatings, cement walls and floors, gypsum, and drywall products, is the material’s most common use. Additionally, it works well for processing wood-based plates, cellular concrete, lime, and other plaster varieties.

Soil is often used in finish finishing work because it prevents the color of the base from showing through a thin layer of plaster. Because it keeps the base from damping, the product’s use in bathrooms is evident. In a similar vein, street protection from atmospheric precipitation is guaranteed.

Apart from these potential applications, this substance can be utilized for:

• arrangement of facade insulation systems;
• the priming of the reinforced layer until the laying of decorative plaster;
• applying to the coating before staining it with acrylic, water -based, oil paints.

The clutch and quality of silicone and wallpaper adhesive application are greatly enhanced by the soil. Ceresite Article 16 is highly sought after by both professional builders and regular users due to its extensive range of possible works.

Surface preparation

Carefully preparing the base will ensure that the subsequent coating is of a high caliber. Make sure the base is dry and does not crumble. The surface is straight and free of:

• fat and oils;
• dust and dirt;
• the remainder of the mastic;
• old paintwork.

Examine the strength of the surface before adding the soil. This is accomplished by feeling and tapping it, and if required, by cleaning and hiding delicate areas. Cracks and holes are filled in and straightened in the future. It’s also necessary to remove any mold, moss, fungus, and other flaws from the interior and exterior walls before priming. Paul, specialized fungicidal mixtures should be applied to the walls and screed in wet rooms.

Also, the following needs to be completed in advance:

1. Treat very absorbent bases (wood -steering plates) with special primers to one layer (you can take Ceresite Article 17), then let it dry for 4-6 hours.
2. Doors, windows on the edges paste out paper tape to protect against soil pollution.
3. When applying for waterproofing after installing the latter, 3 days should pass.

An efficient method for priming surfaces before painting is to use Ceresite ST 16 primer, which offers superior adhesion and a longer-lasting finish. Because of its versatility, this primer can be used on a variety of surfaces, such as drywall, concrete, plaster, and brick. Its main purpose is to provide a level, smooth base that improves the performance of the paint layers that come after.

The Ceresite ST 16 application process is simple to follow. To begin, give the surface a thorough cleaning to get rid of any dust, debris, or loose particles. Using a brush, roller, or sprayer, apply the primer to the clean, dry surface. Prior to applying the topcoat, make sure the primer has dried completely and covered the entire area evenly. In order to get the best results and guarantee that the paintwork will last, this step is essential.

Because Ceresite ST 16 helps to prevent peeling and cracking, it is especially useful in areas that are subject to high humidity or temperature fluctuations. It’s also perfect for surfaces where paint might not adhere well due to its superior adhesive qualities. You can guarantee a longer-lasting, more polished finish by using this primer.

In general, both pros and do-it-yourselfers will find Ceresite ST 16 to be a wise addition to any painting process. It makes the prep process much easier, and it also makes your paint job look much better and last longer. This primer is an invaluable addition to your toolkit because it is dependable and simple to use, regardless of the size of the project—whether it is a small-scale DIY project or a larger commercial undertaking.

The overview Ceresite ST 16 is a multipurpose product that can be used on external and interior surfaces and serves as a perfect foundation for a variety of finishes. Its simple application method guarantees superior durability and adhesion for later coats of plaster or paint. In order to ensure that your projects run smoothly and last a long time, this article will walk you through the specific uses of Ceresite ST 16, provide step-by-step application instructions, and offer advice on how to get the best results.

Video on the topic

How to prepare the surface before applying the stucco spar

Textured plaster on the facade of the house.! Applying the soil of paint Ceresit ST 16 with a roller.

Quartzer primer Ceresit CT16, applying a primer to the facade in front of decorative plaster

Review. Ceresit CT 16. Primer.