Primer KhS-010-powerful protection of metal from acids and alkalis

Harsh environmental factors, such as exposure to acids and alkalis, pose a constant threat to metal surfaces. These substances have the ability to greatly erode metal over time, causing corrosion and other problems. The appropriate protective coating is crucial to fending this off. Primer KhS-010 is designed to provide strong defense against these aggressive agents for metal surfaces.

The remarkable resistance of this primer to chemical exposure is well known. Metal structures and components have a longer lifespan thanks to KhS-010’s robust shield, which can be used in everyday or industrial settings. Because of its special composition, the metal underneath is protected and intact even in the presence of strong acids and alkalis.

Primer KhS-010 is easy to apply and works well. Because of its adaptability, it can stick to a variety of metal surfaces well, providing a stable and smooth foundation for additional coatings. Because of this, it is a crucial component of any metal protection plan, guaranteeing the long-term security and functionality of structures.

Purchasing premium protection, such as KhS-010, is essential to preserving the integrity of metal assets. By using this primer, you can avoid expensive repairs and replacements while also maintaining the metal’s aesthetic appeal. You can rely on KhS-010 to maintain the toughest chemical challenges off of your metal surfaces.

Areas of use

The KhS-010 soil was created to improve the resistance of metal and reinforced concrete products against gaseous substances, mineral acids, alkalis, saline solutions, and atmospheric phenomena such as rain, fog, and high humidity.

It can be applied to concrete, giving surfaces dependable, long-lasting protection.

The following industries can make use of KhS-010 primer.

• Production. It processes machines, a variety of mechanisms, racks and metal trolleys. Priming is aimed at preventing the development of corrosion.
• Construction of roads. Lighting pillars installed along roads, bridge supports, elements of vertical traffic marking are primed.
• Building buildings. Metal structural elements are primed – reinforcement, frames, floor slabs, roof, fence.
• Households. Metal castings are covered with primer on the windows, pipes along which water, gas and heating, playgrounds, fences are supplied.
• Maintenance stations. Here are the guides of the viewing pits, lifts, racks, car trailers before painting.
• industry. Him -resistant primer is used in industries where equipment and metal structures are subjected to the constant or systematic influence of aggressive media and mechanical effects.

The advantages of the primer KhS-010

Metal and reinforced concrete can be shielded from rust with the primer KhS-010.

This soil does not require any prior stripping because it contains acidic components that show small signs of corrosion on the surface.

There are additional benefits to the primer.

• If you use it as a basis for the paintwork, then the surface, thus treated, will be able to serve up to 15 years, but this is provided that there are no mechanical damage.
• The composition applied to the surface protects it from the effects of the humid environment.
• Inert to the effects of aggressive media.
• It has a wide temperature range of use -from -30 to +60 ° C.
• Resistant to fire.
• Elastic.

• Resistant to low temperatures, when frozen with subsequent defrosting does not lose its properties. Can be used in the winter months.
• Cannot be influenced by ultraviolet radiation.
• Simple in circulation, when applying does not flow, does not leave the drones.
• Dry quickly. In the summer, 1 hour is enough for drying 1 layer.
• Minimum consumption. To protect the base from external influence, just apply the primer with one layer.

An excellent way to protect metal surfaces from the corrosive effects of acids and alkalis is with primer KhS-010. This strong primer creates a tough shield that keeps metal structures safe from chemical deterioration. KhS-010 provides long-lasting protection and is very easy to apply, making it a great option for industries that deal with harsh chemical environments. This primer provides dependable protection against the harshest conditions, ensuring that metal remains intact and functional for an extended period of time, whether it is used for piping, storage tanks, or industrial equipment.

Specifications

One-component primer CHC-010 made of vinyl chloride and vinylidene chloride. The smell of the dirt is strong when the factory container is opened, but it goes away when the surfaces are processed.

It is acceptable to mix soil with additional materials:

• enamel KhS-75U (you can use cable and XV brands), which is applied in 2 layers;
• CHS-76 varnish, which is applied to 1 layer.

The complex polymer coating’s overall thickness shouldn’t be more than 85–110 μm.

Solvents from the following brands can be used to dilute primer: R-4 and R-4A. After priming, you can clean the tool with toluene and acetone in addition to the same solvents.

Certificate of conformity

A certificate of conformance for the primer KhS-010 attests to its excellent quality and compliance with national and international standards. The soil also has a hygienic conclusion from the Center for the State Sanitary and Epidemiological Supervision, which, subject to the guidelines governing its operation, certifies the composition’s safety for the environment.

Below is an example of a high-quality passport that displays the examinations and their findings.

Rules and method of application

You can use airless pistols or pneumatic spraying to apply to the surface in compliance with GOST 9355-81 xs 010.

There are several stages to the work.

1. The base requiring processing is cleaned of old painting and degreased.
2. The jar of soil opens, mixed with a drill with a mixer nozzle, and if necessary is diluted with a solvent.
3. The composition is refueling into the sprayer and the first layer is applied to the already prepared basis.
4. After 1 hour. After applying the first layer, if necessary, the surface is covered again.
5. After another 1 hour. enamel is applied with two layers, with a drying period of 1-2 hours. for each layer at ambient temperatures +20 ° C. The manufacturer is allowed to use enamel stamps cholesty, xart, XV.
6. Когда эмаль полностью высохнет, можно наносить 1 слой лака марки ХС-76.

It is not permitted to load during a downpour. Wet and icy surfaces cannot be processed using the composition.

A primer can be applied in an environment with an air humidity of no more than 80% and a temperature range of -10 to +30 °C. It is essential to have adequate indoor air ventilation during priming. Its temperature indicator should be set to 3 °C with the dew point in order to prevent condensate from building up on the surface, which is susceptible to processing.

Security measures

It is not possible to work with the flaming soil close to open fire sources. The respiratory system and the digestive system should avoid the pairs of primer KHS-010 due to their extreme toxicity. Should the mixture come into contact with the skin, it needs to be promptly removed using a warm soap solution. If he got in your eye, you should immediately seek medical attention and thoroughly rinse the mucous membrane with running water.

It is necessary to use specific protective equipment when priming surfaces (glasses, masks, respirators, gas masks, gloves). The processing room must have adequate ventilation before and after priming.

A primer can be transported in an entire factory container using any kind of transportation; however, the temperature range must be between -30 and +30 °C. Additionally, atmospheric precipitation must not affect the primer’s composition. Soil can be kept in a packed state between -20 and +30 °C in a dry, dark room.

Six months are left on the shelf after the date of manufacture. The primer can be used after this time, but only after being sure it complies with TU 6-21-51-90 requirements.

When it comes to shielding metal surfaces from the damaging effects of acids and alkalis, Primer KhS-010 is an excellent option. Because of its special formulation, metal structures are guaranteed longevity and durability thanks to a strong barrier. This is especially crucial in settings where workers are frequently exposed to corrosive materials, which is why KhS-010 is such a useful tool in industrial settings.

Primers KhS-010 are very easy to apply and have a lot of advantages. It improves topcoat adhesion, resulting in a finish that is smoother and more consistent. This enhances the metal’s overall protective properties in addition to improving its aesthetic appeal. By acting as a barrier, the primer stops corrosive substances from damaging the surface.

Primer KhS-010’s adaptability is one of its main benefits. It is a versatile solution for a range of projects because it can be applied to different kinds of metal. This primer offers dependable protection for any metalwork, including machinery and structural components. For numerous industries, its ability to withstand acids and alkalis makes it the ideal option.

Purchasing a premium primer such as KhS-010 is essential to preserving the integrity and aesthetic appeal of metal surfaces. It provides strong resistance to corrosive agents, which helps metal structures last longer. This makes it a more economical decision in the long run because it lessens the need for frequent repairs and replacements. It is also a practical one.

To sum up, Primer KhS-010 offers a great option for people who want to shield metal surfaces from alkalis and acids. It is the best option for guaranteeing the longevity and durability of metal structures because of its strong protective qualities and ease of application. You are making an investment in the longevity and preservation of your metal assets by selecting KhS-010.

Video on the topic

Soil for zinc, alumini stainless steel

Emal Anticorosine 3 in 1 Element | Directly in Irzhi

Kansai soils | Acidic or epoxy? | Soil m/m | Application and nuances in work!

Test of soils for corrosion | What kind of soil to choose? PART 1