How to rub the putty on the wall correctly

Although applying putty to a wall may seem difficult, with the right methods, it can be simple and even fun. Your home improvement projects will go more smoothly and effectively if you can master this skill, whether you’re painting a wall or fixing minor flaws.

First and foremost, having the appropriate equipment and supplies is crucial. Your three main necessities are a bucket of pre-mixed putty, a sanding block, and an excellent putty knife. The correct tools guarantee a smooth, even finish in addition to making the work easier.

Make sure the wall surface is dust- and debris-free before starting to apply putty. A properly prepped surface improves putty adhesion and gives the finished product a more polished appearance. Take your time cleaning the area, and use a damp cloth to wipe away any last bits of debris if necessary.

Be sure to work in small sections when applying the putty. Apply a thin coating to the region, making sure to press down firmly to seal any gaps or crevices. Applying multiple thin layers is preferable to applying a single thick layer because it helps to prevent lumps and guarantees a smoother finish. Let every layer completely dry before applying the next.

Sanding is the last step to take after the putty has dried. To smooth the surface, use a sanding block with fine grit. Sand evenly and gently, making frequent checks to see how you’re doing. The idea is to blend in seamlessly with the surrounding wall so that painting or other finishing touches can be applied with perfection.

Grinding walls after putty – why should this be done

Novice masters should know why the procedure is necessary before grouting putty on the apartment walls. Many people think that since putty is meant to cover up minor imperfections, you can just use it for that purpose. But mistakes made when using a spatula on the surface frequently result in minor flaws that show up on the finishing material. Additionally, choosing a subpar putty might not produce the intended outcome. The only way to get the smoothness required for many coatings is to rub the layer.

Although pulling putty is not always necessary, there are two ways to proceed when the stage is avoidable:

  • When the repair is carried out in the pantry, where the decorative look is not so important, it will be possible to limit yourself to a sticker of a new finish;
  • The surface is not necessary when the base differs evenly, and it is also supposed to be installed by thick and dense finishing materials after the completion of the preparatory phase.

In other cases, you should not believe experts who say you can skip the grinding and save time cleaning the ground. The wallpaper will adhere to the wall more firmly and its edges won’t peel off with time. You have to wipe the base when the surface is meant to be stained.

Small irregularities cannot be concealed by the paint layer; instead, they will be accentuated against the overall background, greatly detracting from the overall appearance. In this instance, even though the surface appears uniform from the outside, it is still worthwhile to use a flashlight to check the base for any minor flaws and to grind the surface.

When leveling is not required

It was made clear that grip putty is always necessary for painting because of the characteristics of the finish. However, if tile or drywall sheets are intended to be installed, perfect smoothness cannot be achieved following the application of plaster and putty. It is possible to distinguish between the following circumstances when high-quality clutching the walls after putty is required:

  • The finishing layer will distinguish any types of irregularities that become more noticeable in light, begin to discard the shadows, and irregularities are also emphasized in lateral viewing. Paper wallpaper coatings can make inconspicuous flaws only if there is a pattern, when the pattern is absent, then all defects will appear, also occurs with painted surfaces;
  • The material will fit tightly on the base, vinyl canvases can close small cavities and protruding elements, however, during operation, such bumps will lead to problems. So in these areas there will be air that can reduce the strength of the clutch with the wall, and the wallpaper will be peeled off;
  • It is not always necessary to achieve a beautiful design, bring the surface to an ideal state, pantries, the basements do not require such preparation, in this case it is more important to protect the surface from negative factors.

As a result, when determining whether to skin the base before finishing work, you should consider the room’s characteristics as well as the surface decoration material that you have chosen.

Necessary tools

Methods for pulverizing the crucial decision-making moment prior to working independently. There are many options for appropriate tools available for purchase; in order to select the best kind, you must comprehend the characteristics of the potential options. Therefore, the following gadgets work well with the process:

  • Grinding bar, which is often chosen for work. This tool works as a grater, with the basis for grinding, which can be made of sandpaper or abrasive grid;
  • A grinder is selected to accelerate the process of work, and when it is necessary to process many square meters. There are different types of power, the more powerful rotation, the faster you can complete the grinding of walls for painting.

Disassembly is required for devices that can be chosen for work, but selecting the appropriate nozzle is just as crucial for high-quality base cleaning. Thus, the differences between sandpaper and the abrasive grid—which are also produced by various methods—are established. The benefits of materials include the following:

  • The grid for grinding the surface, stands out with the convenience of work, the device will be less than the device, the work passes quickly and efficiently. Due to the presence of small holes on the mesh material, the surface will not clog, the wear resistance is good. If necessary, the wiped type is simply replaced, you should choose a grid for the size of the bar, which will be used. On sale, various options are presented in width and length;
  • Eskaric paper is considered a less convenient type for processing large surfaces, but the efficiency of grinding is good. There are different types of granularity, usually begins to work with larger types: 60, 80, 100, often finish processing 120 and 150. At the same time, the choice of the option should be done practically, checking what granularity will become optimal for bringing to smoothness of the wall. So first it is worth buying each type in small quantities for verification. But in any case, a large grain is first used, after applying a small type is used.

Paint putty can be applied using either a wet or dry technique.

The first option is characterized by less dust formation; however, the polished portion of the solution still contains porridge, which is also inconvenient. It is hard to completely prevent the second kind of dust formation, but you can lessen the issue by using sandpaper with a special coating or a grid.

You also need to prepare additional tools and materials in addition to grouting putty devices for paint and wallpaper:

  • Flashlight to check the presence of flaws;
  • Putty knife;
  • Ladder or staircase;
  • Protective clothing.

The newest items are required to protect the master’s respiratory system from dust and prevent health issues. Thus, you must wear a headgear, gloves, safety glasses, and a respirator.

When processing large amounts of square meters, a grinder is chosen to expedite the work process.

Correct putty rubbing is necessary to achieve a smooth, perfect finish on a wall before painting. Make sure the wall surface is dust- and debris-free before proceeding. Apply the putty evenly and press it into any holes or cracks using a putty knife. Apply thin layers, letting each one fully dry before moving on to the next. To achieve an even finish, lightly sand the surface in between layers. It will look polished and professional if you take your time and follow these steps to create the ideal base for your paintwork.

Process and rules of surface grouting

Because working with the wall and the ceiling differs slightly, you must learn the subtleties of the work in order to fade the base with high quality. It is best to apply the finish grout without first applying a primer solution.

If you follow the technology, you can create a smooth foundation by hand without hiring experts who charge a lot for their services. As a result, the key steps are outlined below.

Wall grinding technology

Selecting the appropriate work tools is necessary before pushing the walls after putty. The surface is assessed in this regard. Elevator paper is chosen according to the operation stage; granularity 60 is used for initial grinding, and 120 for completion. It is best to use a grinding machine if you have to work in a large room because it will be difficult to handle the entire area by hand. However, manual adaptation should be used when working with angles, inaccessible zones, recesses, and cavities.

The following actions need to be carried out in this manner:

  1. First you need to eliminate large defects, a powerful lamp is turned on, close to the surface, to notice the shadows from the bulges and hollows, they should be noted using a pencil.
  2. Read work at the corners, move from top to bottom, a strip of a meter is usually processed, so the entire surface is grinded step by step. Movements are made in the form of spirals.
  3. Do not press hard on the tool, so the putty layer is usually easier to skin manually, it is important that the efforts do not lead to the appearance of new holes. Should not be recesses along the level of the wall.
  4. The finish stripping should be equally with the starting, but great accuracy is observed that not to break the even layer of putty, it is better to use the sandpaper.

The procedure is straightforward; even without extensive experience, you can carry out work professionally as long as you keep an eye on your efforts and don’t overlook technology.

It is best to use a grinding machine if you have to work in a large room because it will be difficult to handle the entire area by hand.

Features of grinding the ceiling

Selecting the material is the first step in the process of grinding the ceiling after putty. Sandpaper will be needed for this; occasionally, an abrasive mesh is selected. The working principle is generally the same as the wall’s processing.

Wet grinding is typically chosen for ceiling surfaces, but they are aware that it will take some time for the surface to dry.

You need a grinder because the work method of choice, given its complexity of execution, is usually mechanical. The following are the guidelines for fabricating the ceiling:

  1. The sandpaper is selected the same as for walls, first grainness 60 is used, after 120. Когда после будут проводить покраску либо клеить тонкие обои, то процесс выполняют с особой тщательностью.
  2. Close the ceiling to identify defects, begin processing the strip that noted when checking the evenness of the base.
  3. The second layer will also grind, the tool remains the same.
  4. Then it will be necessary to apply a primer solution and carry out the application of antifungal agents, in this case it does not matter to glue the wallpaper or stain the ceiling.
  5. To finish the surface between the wall and the ceiling, it is better to use a special round grinding bar, it will also be required to work with curly parts, protrusions.

To achieve a smooth, drop-free surface in areas where recesses are identified, a putty layer must be applied once more.

You need a grinder because the work method of choice, given its complexity of execution, is usually mechanical.

Whether it is necessary to process the surface after grinding and how

It won’t work to glue the wallpaper or paint the walls right away after the grinding is finished because a lot of dust needs to be cleared out in order for the solutions to adhere well. This is the typical surface that a construction vacuum cleaner is used for.

In order to prevent dust particles from combining with paint or adhesive solution and forming lumps that will both hinder the consolidation of the material on the base and show through the finish, the entire base must be thoroughly vacuumed.

Вогда строительного пылесоса нет, можно подручными приспособлениями очистку. Although the actions will take more time and effort, the outcome will be favorable:

  • The main dust is like a wide brush or a broom, you should not try very hard so as not to spoil the plastic layer of putty solution;
  • After a rag without villi, moistened and well squeezed after water, the base is wiped;
  • The finish can only be done after the surface completely dried, a slightly damp rag is used so as not to blur the putty.

After cleaning is finished, a primer and antifungal compositions must be applied to prepare the base qualitatively.

Vacuuming the base completely is necessary to prevent dust particles from combining with paint or adhesive solution.

After aligning with a putty solution, the surface grinding step is essential as it produces a smooth, flawless wall. Even though the process appears challenging, it is not hard to absorb the rules; if you follow them, beginners can attain the desired outcome. Picking the best tool and abrasive for the job is essential; different tools will be needed for starting and finishing putty; the characteristics of the choice were covered in the article.

Step Description
1. Prepare the Surface Clean the wall to remove dust and debris. Ensure it"s dry and smooth before applying putty.
2. Mix the Putty Follow the manufacturer"s instructions to mix the putty to the right consistency, usually similar to toothpaste.
3. Apply the Putty Use a putty knife to spread the putty evenly over cracks or holes. Press firmly to fill the gaps.
4. Smooth the Surface While the putty is still wet, use the putty knife to smooth it out, removing any excess material.
5. Let it Dry Allow the putty to dry completely, which can take several hours depending on the product.
6. Sand the Surface Once dry, lightly sand the area to ensure a smooth finish. Use fine-grit sandpaper for best results.
7. Clean Again Remove any dust from sanding with a damp cloth before painting or applying additional finishes.

Although smoothing putty on a wall can initially seem difficult, it is possible to accomplish the task with the appropriate tools and methods. Make sure the surface of your wall is clean and clear of any debris first. A smoother finish can also be achieved by using a primer to improve putty adhesion.

Use a wide putty knife to apply the putty for a uniform spread. To prevent lumps and bumps, work in small sections and apply the putty in thin layers. For a consistent surface, it is imperative that the knife be used with constant pressure. The secret is to be patient; hurrying can result in errors.

After applying the putty, let it fully dry before sanding. Sanding evens out any last blemishes and gets the wall ready for paint. Use light, circular motions when sanding with fine-grit sandpaper. Dust and debris should be removed from the wall using a damp cloth after sanding.

Putty that has been applied and sanded correctly guarantees a perfect base for your paint job. By taking the time to do it correctly, you can prolong the life of your paint job in addition to improving the appearance of your walls. You’ll be well on your way to a polished finish with these suggestions.

Video on the topic

Wall putty!I use a 100cm spatula.by @danogips7574

How to putty the wall, so as not to grind it later. No influx

What kind of skin (sandpaper) and grater – skin putty from the walls and ceiling is shot on video

Grinding, grouting, clutching walls simply not expensive, easy, fast.

What color, in your opinion, is able to make a person happier?
Share to friends
Daria Yakovlev

Interior designer, author of online color design courses. I will help you create a harmonious interior using color.

Rate author
Design-Estet.com
Add a comment