How to remove old paint from the kitchen?

Although removing outdated paint from your kitchen can be difficult, it’s an essential step if you want to give the area a new coat of paint. To achieve the best results for your new paint job, start with a clean, smooth surface, whether you’re dealing with chipped paint on the walls, cabinets, or trim. Additionally, removing outdated layers can make it easier to find and address any underlying problems that might be hiding beneath, like damage or mold.

Getting the appropriate equipment and supplies together is crucial before you begin. You may require a combination of heat guns, sanding tools, and chemical paint strippers, depending on the kind and state of the paint. Safety is the first priority, so shield yourself from dust and fumes by donning protective gear like goggles, a mask, and gloves. Keeping the air clear in the kitchen can also be achieved by using fans and opening windows.

The best technique to remove old paint varies depending on the surface and kind of paint. There are several methods available. For instance, chemical strippers work well to remove several coats of paint, but handling them carefully is necessary. Heat guns can quickly soften paint, making scraping easier, but use caution when using them to prevent damaging the paint or starting a fire. Another option is sanding, especially for smaller areas or to remove stubborn patches that have not been smoothed out by other means.

Whichever approach you decide on, diligence and patience are essential. Take your time and make sure all of the old paint is gone before moving on. Work in small sections. In addition to simplifying the painting process, this meticulous preparation will extend the life and improve the appearance of your freshly painted walls. You can make your kitchen feel new and inviting and enjoy it for years to come with the right approach.

When you need to remove the old paint and why

  • if it is multi -layered, swelling, cracked, descending;
  • If the paint is oil, and it is planned to use water -based or acrylic;
  • If you need to plaster the wall or leve it with putty;
  • If wallpaper, ceramic tiles, adhesive wall panels are used as a finish.

This is because the painted surfaces do not offer consistent adhesion to the new coating, are not well wetted, and have low adhesion. This lowers the standard of the work and does not ensure that the decoration will last.

Never use acrylic or water-based makeup to cover an old oil layer. Even if it is applied correctly, it will become apparent after it dries that the coating is uneven and that some areas still have the original color. It’s unlikely that such a finish will be strong.

Occasionally, there are acceptable compromise options, such as gluing the net, using an adhesive primer with deep penetration, applying notes or scratching the surface with a spatula, and partially removing the layer before re-staining in areas of exfoliation.

They don’t always produce favorable outcomes. It is best to remove the outdated paint in the kitchen right away to avoid running into this issue when doing future repairs.

Necessary tools and materials

It might be necessary to carry out tasks:

  • spatulas;
  • a chisel with a hammer or a hatchet;
  • metal brush;
  • sandpaper;
  • gas burner or technical hair dryer;
  • power tool: a grinder, a drill, a perforator with suitable nozzles (brush, brick crown, etc. P.);
  • washing and devices for its application (brush, roller, rag, spray, etc.).

You really need to wear the mask and safety glasses because the procedure is linked to the creation of a lot of dust and debris. It won’t hurt to use household gloves either.

Additionally, it is advised to cover the floor, place a moistened rag at the exit, tighten the doorway, and fence off a portion of the kitchen (the working area).

Ways to remove paint

Paint removal techniques are numerous. It can be mechanically cleaned, chemically removed, or exposed to heat.


By using the right compositions (washing), you can soften the layer using this method and then easily remove it from the surface.

Benefits of the chemical approach

  1. Suitable for various types of colors (powder, acrylic, latex, oil, alkyd, nitroemale).
  2. Saves time and effort.
  3. Does not require special devices for applying.
  4. Does not damage the base.

There are liquid, spray, gel, paste, and powder shuttings that are made with water mixed into them. Differentiations:

  • designed to remove individual types of paint;
  • universal (not suitable for water -based, latex and acrylic);
  • express tools (work as quickly as possible).

Some contain oily components or additives that slow down the solution’s evaporation from the surface. It is advised to wash the wall after using them. They can cause spots to appear on the surface or decrease adhesion with fresh coating.

Because of the toxicity and causticity of these products, you must ensure that the kitchen has adequate ventilation. Pregnant women, kids, and pets must leave the apartment when working from there.

Rubber gloves, protective clothing, glasses, and a respirator are required for all manipulations. The resultant waste needs to be disposed of differently.

The oil coating is the hardest to remove. If it was applied more than once, it would need to be removed in layers over the course of several visits, which would be expensive and time-consuming. Washing them works well with a new coating (up to two years), but they are nearly useless for an old oil layer.

  • How to remove old paint from the ceiling?
  • How to quickly remove water -based paint from the walls?
  • Bathtub washing products without damage to enamel.


This technique is predicated on the observation that heat causes the finish to swell, become plastic, lose its adherence to the base surface, and exfoliate more readily. A technical hairdryer, gas burner, or soldering lamp is used to heat a small portion of the coating; the softened layer is then scraped off right away.

Drawbacks associated with this approach:

  1. Not suitable for heat -resistant enamels.
  2. Requires the availability of appropriate equipment.
  3. You can not use near a gas pipe, flammable objects, objects that can be deformed from heat, near switches or sockets, in places.
  4. The paint itself may light up. Some of its types when heated tightly are closed to the surface.
  5. A caustic smell appears, evaporation is toxic. Reliable ventilation and respirator are needed.

The thin layer is small and can be tried to be removed by heating it through an aluminum foil sheet with an iron. However, the resulting temperature might not be sufficient.


The paint layer can be removed with a power tool or by hand. Using a sharpened spatula, the coating is scraped off if it exfoliates well.

This is a time-consuming and lengthy process. It works best for cleaning walls, wood surfaces, and drywall in difficult-to-reach places (behind the pipe, in the corner, beside the skirting board, etc. D.). Very little dust forms while the work is being done.

You can attempt to remove the coating by using a hammer and chisel. This technique is applied in regions where the layer is not very thick. The chisels’ working area is placed against the wall, and the handle is tapped with a hammer. Simultaneously, the tool becomes blurry quickly, so it needs to be periodically sharpened with sandpaper.

With it, it can be taken out. This mostly holds true for surfaces made of metal and wood. The layer is treated with coarse-powered paper first, followed by smaller paper. will hasten the emery circle’s application for drills and grinders with granularities greater than P40.

A small hatchet can be used in place of a chisel:

  1. The integrity of the formation is violated with short strokes, as a result of which small cuts are formed. They have them chaotically with a small interval (up to 7 cm).
  2. They moisturize the wall abundantly and leave for several minutes to impregnate.
  3. The paint is cleaned with sharp movements, directing the blade almost parallel to the wall. At this stage, you can use a spatula or chisel.

Manual techniques need perseverance and physical stamina. Simultaneously, you can pry open the base or cause plaster in the kitchen to shed.

Power tool use will be more efficient and convenient. Although the wall is qualitatively cleaned by the grinder, visibility is significantly decreased as a thick, dusty curtain forms.

As a result, you must continuously take breaks while you wait for it to settle, which makes this approach illogical.

Drill nozzles that work well:

  • Grinding with sandpaper on Velcro – ineffective, heats up, easily erased;
  • The vest – qualitatively cleanses, but the process is not fast enough;
  • A brick crown with a boura removed – suitable for small areas that remained after applying other methods;
  • The paintwork – a device of 3 chains, works efficiently and accurately enough, does not give dust.

While the coating is entirely removed by the nozzle-equipped punch, bits of putty, plaster, and even concrete are also removed. A filling milling cutter removes all paint and the base layer for thorough cleaning.

  • Is it possible to glue wallpaper on water -based paint?
  • How to wash water -based paint?
  • How to paint the ceiling tile?
  • Is it possible to apply acrylic paint to alkyd paint?
  • How to cover the paint so as not to wash off?

With the appropriate method and equipment, removing outdated paint from your kitchen can be a simple task. Determine the type of paint and surface first, then select an appropriate technique (such as chemical paint stripper, heat gun, or hand sanding). To protect yourself from dust and fumes, make sure the area is ventilated and surfaces are covered. A clean, fresh surface ready for a fresh coat of paint can be easily achieved with the right technique and careful preparation, completely changing your kitchen.

Washing technology

Order of work:

  1. Peel the surface.
  2. Putting on protective equipment, apply the composition in a convenient way and cover with polyethylene. To treat large surfaces with liquid washing, use a roller or spray gun.
  3. Wait the time indicated in the instructions, remove the layer with a scraper. Then you can walk with a metal brush or sandpaper.
  4. Not exfolved areas process the wash re -.
  5. Wash the purified surface with detergent.
Method Steps
Scraping Use a putty knife or paint scraper to gently remove loose paint. Be careful not to damage the surface underneath.
Heat Gun Apply heat to the paint with a heat gun until it softens, then scrape it off. Wear gloves and work in a well-ventilated area.
Chemical Stripper Apply a chemical paint stripper with a brush, wait as directed, then scrape off the paint. Use protective gear and follow safety instructions.
Sandpaper Sand the surface with coarse-grit sandpaper to remove paint, then switch to finer grit for a smooth finish. Use a dust mask.
Power Washing For larger surfaces, use a power washer to blast away old paint. Be careful with pressure settings to avoid damaging the surface.

Although removing old paint from your kitchen can seem difficult, it is actually a manageable task if you have the right tools and techniques. Knowing what kind of paint you’re working with and selecting the right removal technique will help you get a clean, fresh surface that is ready for a fresh coat. Every technique has pros and cons, whether you choose to use heat guns, chemical paint strippers, or hand sanding.

Your first concern should always be safety. To prevent mishaps, make sure the area is well-ventilated, put on safety gear, and take your time. When using chemicals, make sure you carefully follow the directions and dispose of any waste in an appropriate manner. When using heat guns, keep a safe distance from combustible objects and exercise caution around potential fire hazards.

For paint removal to be successful, preparation is essential. Appliances, floors, and countertops can all be shielded from spills and debris by covering them. Over time, purchasing high-quality tools will save you time and effort. A smoother surface will be produced by being thorough and patient during the removal process, which will make the painting job that follows much easier and more polished.

Prior to painting over the old paint, give the surface a thorough cleaning and preparation. Ensuring good adhesion and a long-lasting finish requires this step. The kitchen is a high-traffic area, so making the effort to remove and prepare paint properly will pay off in terms of longevity and aesthetic appeal.

Video on the topic

How to remove old paint from the walls in the bathroom and in the toilet ? (Part 6)

Repair in Khrushchev | Remove paint from the walls without a perforator – 2 part

Plaster on the paint is possible or not. How to remove old oil paint from the walls in the kitchen

Plaster, putty on oil paint – it is possible or not ?

How to remove old paint from the walls during repair in the bathroom for high -quality tile laying. All methods

How to remove old paint from the walls

How easy it is to remove oil paint from the wall

Removing water -based paint • dismantling

What color, in your opinion, is able to make a person happier?
Share to friends
Maria Vlasova

Chemist-technologist, expert on paint and varnish materials. I will help you figure out the compositions of paints, their characteristics and choose the best option for your purposes.

Rate author
Add a comment