A popular option for people wishing to protect and improve the appearance of metal and wood surfaces is varnish PF-170. This varnish is frequently used in both residential and commercial settings because of its reputation for toughness and glossy finish.
The ability of PF-170 to create a strong, protective layer that shields surfaces from UV rays, moisture, and scratches is one of its key benefits. This makes it perfect for use on doors, furniture, and even outside structures where weather exposure is a concern.
While applying PF-170 is simple, there are a few things you should know to get the best results. It is important to prepare the surface by making sure it is dry, clean, and free of any previous paint or varnish. This improves adhesion and extends the life of the new coat.
Before using, thoroughly stir the varnish to guarantee a uniform consistency. Depending on the size and type of surface, it can be applied using a brush, roller, or spray application method. It is advised to apply several thin coats with enough drying time in between for a uniform and smooth finish.
When applying and drying PF-170, adequate ventilation is crucial because the solvents in it are potentially hazardous if inhaled in large amounts. Always abide by safety precautions, such as donning protective gear and operating in an area with adequate ventilation.
Varnish PF-170 is a versatile addition to your painting and varnishing toolkit that can produce a beautiful, long-lasting finish that enhances and protects a variety of surfaces with careful application and the right preparation.
Application area
The varnish is used to give the surface a shine and shield it from the effects of the outside world. Applicable to goods composed of the subsequent materials:
- metal;
- wood array;
- Fiberboard, chipboard, MDF, OSB, plywood;
- ceramics.
Moreover, it is applied on top of glyftal soils and pentafal enamels to increase their resistance to deterioration and outside influences.
Basic properties
Applying the PF-170 to the ready surface results in the formation of a silicon heat-resistant coating. In terms of appearance, this is a thin, transparent coating that gives the material a glossy sheen while shielding it from the elements.
Regarding a note. Thanks to its constituent parts, varnish highlights the natural pattern of wood and extends its lifespan by deeply penetrating the material’s structure.
Silver can be obtained by properly combining PF-170 with aluminum powder. The surface of this composition is more resistant to corrosion wear.
The PF-170’s technical attributes can be divided into the following categories:
- The content of volatile components is 50 %;
- drying time at a temperature of 20 ± 2 ° C for at least 72 hours, and at t = 90 ° C – only about three hours;
- The lacquered surface is resistant to water with constant exposure during the day;
- The elasticity of the solid layer PF-170 reaches 1 mm;
- Approximate consumption of the composition per square meter of coating-70-75 g.
Regarding a note. PF-170 is distributed in 0.5 and 1 l plastic packaging and 0.8 and 2.5 l tin can containers.
Surface preparation
The product needs to be pre-prepared before being varnished:
- Clean the metal surface from contaminants.
- Remove the scale and rust. To do this, use a grinder or cord -shaped sandpaper (if necessary). The surface should be equally rough and have a metal shine throughout the area. Easy darkening are allowed in the areas where it was scale.
- After that, clean the varnishing area of dust, fat and biological contaminants. Wipe with a rag moistened in a white-spell, and then with a dry cloth.
When handling wood or chip products, the surface needs to be polished and cycled, if necessary. The coating must be degreased and dust-free once it has reached a smooth consistency. A wooden element can be treated with porcelain, stain, or olifa prior to varnish application.
Regarding a note. Before varnishing raw wood, an alkyd primer must be applied to provide protection.
Preparation of varnish
The PF-170 is diluted to a specific consistency with solvents before being applied to the surface. Use a solution of solvent and white spirit (1: 1) or xylol and white spirit (2: 3). Solvent and xylol can be used separately.
LKM must be stored at a negative temperature before being brought indoors for a full day. If a film starts to form on top of that, the composition needs to be filtered.
Application
The following methods are advised for applying the varnish to the cleaned and finished surface:
- Pneumatic airless spraying. The most common and practical method. Implies the most economical consumption of LKM, which is applied with a thin layer. Allows you to quickly treat large -sized parts.
- Dipping. It is used when varnishing small streamlined products of various forms. After this procedure, the varnish is evenly distributed over the surface of the part, and the excess flows. You can get a sufficient film thickness after one application of LKM.
- With the help of a brush. This method is most suitable for home use. The cost of the tool, in comparison with the above, is the minimum. Used to varnish small details. After applying the varnish, there may remain the flow and traces of the brush.
The surface is coated with aluminum powder mixed with silver varnish and heated between +5 and +25 °C. Humidity in the air shouldn’t go above 80%. In order to achieve a high-quality surface, the composition must be applied in two or three stages. After the initial staining, the coating needs to be polished.
Important: Oil, NBX, and nitroemali paints cannot be applied over PF-170.
Notes
It’s crucial to keep in mind that you cannot apply the next layer until the previous one has dried. Each varnishing step can be started no sooner than 24 hours after the one before it. This ensures that the coating is uniform, free of cracks, and free of areas where the material is "graduated." When the surface dries completely, it takes 72 hours at 20 ± 2 °C.
Following painting, the instrument needs to be completely cleaned of any leftover paint. Using a solvent (xylol, solvent, white spiteration) is advised. Until the next application, the remaining varnish is kept sealed in factory containers.
Shine A popular and adaptable coating among paintwork supplies is PF-170. It is prized for its exceptional resilience to a range of environmental conditions. PF-170 varnish improves the longevity and appearance of surfaces by creating a strong protective layer over them.
The versatility of PF-170 varnish on a variety of surfaces, such as metal, wood, and certain polymers, is one of its main advantages. It is a well-liked option for both indoor and outdoor applications because of its adaptability. PF-170 varnish offers dependable protection and a smooth, appealing surface, making it ideal for protecting wooden tables or adding a glossy finish to metal structures.
To get the best results when applying PF-170 varnish, it’s important to follow the recommended application techniques. Applying this varnish can be done in a number of ways, depending on the project’s needs, including dipping, brushing, and spraying. Applying thin, even coats on a clean, dry surface is crucial to getting an impeccable finish.
Apart from its protective attributes, PF-170 varnish is renowned for its rapid drying time, facilitating the timely completion of projects. Because of this feature, it can be used for projects that need to be completed quickly or that need to be painted in multiple coats quickly.
All things considered, PF-170 varnish is notable for its robustness, adaptability, and simplicity of use. This varnish offers a dependable way to enhance and protect a variety of surfaces, whether you’re working on industrial projects, painting as a professional, or doing it yourself. It is the preferred option for many paint and coating applications due to its resistance to environmental factors and its simple application procedure.
Shine When it comes to protective and ornamental finishes for metal and wood surfaces, PF-170 is a widely used option. It is renowned for being long-lasting, chemical and water resistant, and having a glossy finish, which makes it perfect for both indoor and outdoor use. For optimal application, prepare the surface carefully, work in a dust-free environment, and apply PF-170 in several thin coats. This post will walk you through the crucial actions and advice needed to apply PF-170 varnish flawlessly and sustainably.