AK-113 polyacrylic varnish: description and instructions for use

A flexible coating option with a stellar finish and longevity is AK-113 polyacrylic varnish. This varnish’s easy application and long-lasting protective qualities have made it popular with both professionals and do-it-yourself enthusiasts. A dependable solution that withstands abrasion, AK-113 can be used to improve the appearance of metal, wood, or other surfaces.

The water-based formula of AK-113 polyacrylic varnish is one of its primary characteristics; this makes it safer to use and more environmentally friendly than solvent-based alternatives. This implies that it has a low smell, which qualifies it for indoor use without requiring a lot of ventilation. The varnish’s ability to dry quickly means that projects can be finished quickly, saving time and effort.

It’s easy to apply AK-113 polyacrylic varnish. Make sure the surface is dust- and grease-free, clean, and dry before proceeding. To achieve a uniform consistency, thoroughly stir the varnish before using. Using a brush, roller, or spray, it can be applied based on the project’s size and requirements. Apply several thin coats as opposed to one thick one, and wait until each layer is fully dry before applying the next for optimal results.

A clear, durable surface that is resistant to stains, scratches, and UV damage is the end product. For objects exposed to sunlight or high traffic areas, the AK-113 is a great option because of this. To keep it looking its best, all that needs to be done for maintenance is to clean the surface with a damp cloth. You can achieve a professional-grade finish that will protect and enhance your projects for years to come with AK-113 polyacrylic varnish.

Product Name AK-113 polyacrylic varnish
Description A durable polyacrylic varnish suitable for protecting various surfaces such as wood, metal, and plastic. Provides a clear, glossy finish.
Instructions for Use 1. Ensure the surface is clean and dry. 2. Apply the varnish evenly using a brush or spray gun. 3. Allow sufficient drying time between coats. 4. For best results, apply multiple thin coats rather than one thick coat. 5. Sand lightly between coats for a smoother finish if necessary. 6. Follow safety precautions and proper ventilation during application.

Description and product properties

The varnish-medium-sized AKRIL AK-113 fluid is made of polyacryl resin and contains plasticizers that have been diluted using organic solvents. It appears translucent and exhibits some opalescence, or the ability to reflect light at specific angles.

The product dries quickly; after two hours at room temperature, it takes on the appearance of a third-degree (for the cast) dried film. Following drying, a homogenous, transparent, smooth surface free of small crumbs, hillocks, and sediment is produced. The AK-113’s additional characteristics are as follows:

  • good moisture resistance, the ability to withstand prolonged contact with standing water;
  • anti -corrosion protection of metal surfaces;
  • high resistance to the influence of solvents, radiation, minerals, UV radiation, detergents, aggressive vapors and gases, oils, gasoline, oil products;
  • wear resistance, long service life;
  • resistance to atmospheric factors, temperature changes.

Because of the high force that the varnish uses to adhere to the product, the coating practically "fuses" with the surface. Chemical action does not cause the durable, elastic film to soften. AK-113 is available for purchase in 15 kg flasks, 25 kg drums, and 35–57 kg barrels.

The scope of the varnish

Metal surfaces are the product’s primary application. The varnish can be applied to ferrous, non-ferrous, and alloy objects that operate normally or at temperatures up to +150 degrees. The following materials are typically utilized with the tool:

  • aluminum;
  • Magnesium and its alloys;
  • brass;
  • copper;
  • stainless steel;
  • zinc and galvanized surfaces;
  • titanium.

The varnish works well on a variety of non-metallic surfaces, including cardboard, papers, plastic, and plexiglass. You can use the product in any climate zone once it has dried.

LAK AK-113: Consumption and technical characteristics

The product’s theoretical consumption per layer is between 115 and 140 grams per square meter. A surface area of 7.1–8.6 square meters requires one liter of varnish. A layer thickness of 10–12 μm is advised. Depending on the kind of material, there are typically one to three layers to provide trustworthy protection.

The varnish’s additional technical attributes are as follows:

  • Conditional viscosity according to the BI-4 (BI-246) with a nozzle diameter of 4 mm-13-17 C;
  • Acid number of water hood – 0.1 mg of con/g;
  • The proportion of the dry residue is 6-9%;
  • elasticity of the film for bending – 1 mm;
  • The hardness of the film according to the TML device (pendulum a) – 0.45 relative units;
  • The resistance of the film to the action of water at a temperature of + 20 degrees – 4 hours, to the action of nephras – 1 hour.

Types of varnish and their differences

The varnishes that are available for purchase are AK-113 and AK-113F. Both have the same application areas, and the produced film has the same look. The composition of the two tools differs: melamin-formaldehyde resin was added to the first tool, which was made solely of polyacryl resin. The AK-113F is different from the AK-113 in a few technical aspects because of its altered composition:

  • drying time increased to 4 hours;
  • The proportion of the dry balance is 9-13%;
  • One layer consumption is less-up to 90-110 g per square meter.

The other characteristics of varnishes are generally comparable: they are both waterproof, resistant to wear and tear, give products strength, and shield against corrosion, chemicals, and UV rays.

For people wishing to apply a long-lasting and eye-catching coating to a range of surfaces, AK-113 polyacrylic varnish is a flexible and dependable option. Its glossy, clear finish makes it perfect for both protective and decorative applications, guaranteeing that your projects are protected from damage in addition to looking great.

Because AK-113 is so simple to apply, both professionals and do-it-yourselfers can use it. Using a brush, roller, or spray gun, depending on your choice and the project’s requirements, you can apply the varnish. It dries quickly, making it possible to apply several coats in a short amount of time and achieve the best possible finish.

The durability of AK-113 polyacrylic varnish is one of its best qualities. After curing, it creates a tough, durable surface that is resistant to stains, scratches, and general wear and tear. This makes it a great option for furniture, high-traffic areas, and other frequently used items.

It’s crucial to carefully follow the manufacturer’s instructions if you want to get the most out of your AK-113. This entails preparing the surface correctly, using the right application methods, and allowing enough drying time in between coats. By doing this, you can help guarantee a seamless, long-lasting finish of expert quality.

In conclusion, AK-113 polyacrylic varnish is a great option for a variety of projects because it combines outstanding durability, ease of use, and a beautiful finish. AK-113 delivers the necessary results with the least amount of trouble, whether you’re looking to finish a flooring job, protect wooden furniture, or improve the look of a craft project.

A glossy, long-lasting coat of AK-113 polyacrylic varnish is an ideal protective and enhancing finish for a variety of surfaces. It is a versatile and durable finish. This article offers a clear tutorial on applying AK-113 correctly, covering surface preparation, application methods, and drying periods. Whether you’re an expert painter or a do-it-yourself enthusiast, following these instructions will help you get a perfect finish and make sure your projects last for a long time in addition to looking fantastic.

Video on the topic

Holomed varnish.

How to apply a varnish in 1.5 layers. Novakryl 590 review

TC12 | Polyesh -transparent self -loading high -glossary varnish for royal finishes

What color, in your opinion, is able to make a person happier?
Share to friends
Daria Yakovlev

Interior designer, author of online color design courses. I will help you create a harmonious interior using color.

Rate author
Design-Estet.com
Add a comment