What to glue first: wallpaper or ceiling plinth?

One of the frequent problems encountered when renovating a home is determining which order to apply ceiling plinths and glue wallpaper. This seemingly insignificant choice has a big impact on how your room looks and feels overall. Gaining an expert and refined appearance in your house can be accomplished by knowing the rationale behind each strategy.

First off, wallpapering has advantages, chief among them being a smooth finish. If you apply the wallpaper before the ceiling plinth, any imperfections or uneven cuts will be hidden by the edges being neatly tucked beneath the plinth. This technique also makes it simple to move and modify the wallpaper without causing any harm to the plinth.

However, putting in the ceiling plinth first will shield your walls from any potential harm when you apply the wallpaper. Installing plinths can be messy since paint and glue frequently run down the walls. You can reduce the chance of sullying or destroying your recently applied wallpaper by doing this step first.

In the end, your priorities and the particulars of your project will determine whether you wallpaper or install the ceiling plinth first. By weighing the benefits and potential drawbacks of each approach, you can choose the one that best meets your renovation objectives. Whether you value a faultless finish or useful convenience, knowing these choices will help you achieve a successful and beautiful outcome.

Question	Answer
What to glue first: wallpaper or ceiling plinth?	It"s generally better to glue the ceiling plinth first. This way, you can ensure a neat and seamless finish where the plinth meets the wall, and any gaps can be easily covered when you put up the wallpaper.

The reasons why it makes sense to glue the wallpaper first

Examine the justifications for applying wallpaper adhesive prior to tension structure installation.

• The finish of the ceiling and floor is performed last, because the wall ennolation is dirty and dusty. However, in modern realities, the argument is controversial, since it all depends on the materials used, technology and skill skill.
• During the fixation of the wallpaper strips, it is likely to stain the stretched ceiling fabric with glue, after which it is difficult to wash. It is also difficult to attribute such an argument to the category of "reinforced concrete", because the modern building materials market offers such a useful thing as a painted tape that can protect adjacent surfaces. In addition, the wallpaper glue is soluble in water, so it is quite possible to wash it with a warm liquid.

Helpful advice: installing tiles on a bathroom drywall wall

• If the wallpaper is used for painting, staining the upper section of the wall without touching the stretch fabric is impossible. As in the previous argument, the painting tape is a panacea from this kind of problem.
• Когда хвосты обойных полос заводятся под багеты, непривлекательный внешне стык между стеной и потолком не будет виден. Here I would like to note that if a sensible finisor is hired, then the joint is invisible in any case. In all other situations, you can use special skirting boards or similar style elements to conceal the boundaries of finishing materials and aesthetically attractive design of such a transition. The photo below shows an example of organic use of ceiling skirting boards when equipping the stretch structure.

Professional reviews indicate that self-described "specialists" who are not well-versed in contemporary construction technologies defend the idea that the wallpaper is glued first. They believe this is the reason they take the simplest course of action, despite the fact that it is highly implausible.

It’s advisable to install the ceiling plinth before wallpapering a room when renovating it. By trimming the wallpaper neatly to the plinth’s edge, ugly gaps and uneven edges can be avoided, resulting in a cleaner finish. This technique also gives your room a more polished and polished appearance by shielding the wallpaper from potential damage during the plinth’s fitting and painting.

How to paste wallpapers under ceiling molding?

The following steps must be followed in order to expertly and beautifully cut the wallpaper beneath the baguette:

• Push stripes with a slight overlap on a frieze.
• Until the glue has dried up, take a wide spatula (30 cm) and with a smooth movement to press the canvas to the junction with the wall. You can also use an iron line for these purposes.
• Then with a knife, without weakening the pressing of the tool, carefully remove excess. The cut place should take place exactly along the edge of the spatula blade.

Crucial! Only an extremely sharp knife—which won’t tear the material—is used for work. Use one section per slice if you are using a painting tool with broken blades.

• The stains of glue that fell on the skirting board are removed with a dry pure rag.

Counseling! It is worthaging the wallpaper cut on a discrete spot to boost confidence. Additionally, you can glue on a few extra pieces of roll, then simply remove them by pressing your hand against them.

Non -woven – the perfect choice for the ceiling?

Non-woven wallpaper is a common solution for the ceiling that gives it a unique look and a gentle glow. It is made of cellulose fibers. It is acceptable to repaint as many as twelve times in one session.

Overnight wallpaper varies:

• high strength – to break them by chance very difficult;
• lack of shrinkage – do not stretch from getting wet, do not compress after drying;
• compatibility with any surfaces;
• the ability to align the ceiling with small defects.

Suggestions. Select wide wallpaper that is non-woven or based on its basis if you want to glue the ceiling with the least amount of work. They don’t require gluing down; instead, the composition is applied solely to the glued surface, unlike paintings on a paper substrate. This makes working in uncomfortable conditions much easier. Wider strips will speed up the process and cut down on the amount of seams.

At this point, you have to choose whether to take the baguette out or leave it in place. Installing it after disassembling it won’t work if the plinth is made of foam. Products made of gypsum and alabaster cannot be adhered to twice. We’ll need to purchase new ones.

Should the skirting board not require preservation, the wallpaper overflow should occur without any issues. Each mistake made when cutting the top will cause the new baguette to close.

There are certain subtleties that emerge if the baseboard is left intact. An old wallpaper is cut with a construction knife and spatula beneath the baguette. The new coating ought to be thick if the old one was (for instance, foamed or embossed). The transition to the previous layer will be obvious with thin wallpapers after the overpass, which is unsightly.

The roll is cut on the floor, just like in the prior instance. They carefully adjust the cut, which has a plinth, to the ceiling.

Or choose the second course of action, which is to make an allowance. In order to prevent wallpaper glue stains, the skirting board is sealed with painted tape. The completed portion is brought up against the wall, but the edge is left unglued. Using a very wide spatula, they crush the wallpaper beneath the plinth, and any excess is cut off with a clean, sharp building knife. A spatula can be led by its blade. Next, the glue is smeared unevenly around the edge, and dry areas are painted with the composition using a brush. Additionally, use a standard 10- to 12-cm spatula to carefully straighten the wallpaper against the skirting board.

How to protect wallpaper during repair

Painting film is used if the ceiling is put in place after the walls. It is adhered to beneath the purported mounting profile line. The substance adheres to the wall due to its electrostatic qualities. The film can be readily erased after the design is installed.

Will support keeping the vacuum cleaner and clean. When the device and perforator are turned on, the pipe is brought as close to the drilling location as possible, and the goal is to gather all construction dust before it settles on the surfaces. However, this approach is limited to strobe protection.

Stretch fabrics – one of the most popular and demanded on the market of decoration options. Just a few years ago, this material symbolized luxury and material wealth. Now it is a very common interior solution. With their help, it is easy to get a perfectly smooth surface under which finishing flaws, cracks and changes between the plates are hidden.
owners to pleasantly surprise and the long service life of remarkable finishing material. If it comes to quality material, he will serve his owners at least 25 years by faith. But the average buyer is often interested in the logical question – how to glue wallpaper under a stretch ceiling so that the ceiling area remains even and visually attractive.

It goes without saying that the first step is to thoroughly examine the problems surrounding the topic at hand, which are covered in the content that follows.

Stretch ceiling and wallpaper – the subtleties of neighborhood
It is necessary to focus on one important aspect: a stretch ceiling is a modern finishing technology, the essence of which is to pull a special fabric or PVC material at a certain distance. In the predominant majority of cases, the fixation of the material is carried out using metal or plastic baguits, which are attached around the perimeter of the room with dowels.
The masters traditionally have a logical question: how to glue wallpaper so as not to damage the stretch ceiling? The reverse order of work is deprived of the slightest meaning – if the finish is started with glued strips, the baguettes will fix them at the walls “tightly”, as a result, cross or replace the wallpaper for new ones not to introduce themselves to possible. Let us dwell on the issues of this issue.

We adhere the wallpaper first—reasoned arguments Many masters advise adhering wallpaper before beginning installation work, and only then start installing a stretch ceiling.

1. The flooring and ceiling zone is performed at the final stage, since the wall ennolation is a very troublesome lesson, accompanied by the release of a large amount of dust and dirt. However, in the 21st century this aspect is leveled, since the final result largely depends on the skill of the specialist, the applied technologies, materials.
2. At the stage of fixation of the strips, there is a high danger that the ceiling zone will be stained. In this case, it is much safer to use painting tape. The wallpaper glue is dissolved in water, and therefore, at a certain level of desire, it can be washed with warm water.

1. If we are talking about the use of wallpaper for painting, not to hurt the upper section is extremely problematic. For such cases, it is safer to use painting tape.
2. When a factory of tails of wallpaper strips under the base of the baguette, the unattractiveness of the external joint in the space between the ceiling and the wall becomes inconspicuous. Here it is necessary to focus on – if you use the services of a professional finisher, the joint area will remain invisible in any case. As for other cases, it is advisable to use shaped elements (skirting, lining). The image below shows the equipment of the stretch structure according to the specified method.

If the master advises you to apply wallpaper, wait to do so until the ceiling area has been completed before consulting another expert. Such claims represent a specialist’s low level of qualification.

Wallpaper pushed under a stretch ceiling From a technological perspective, the steps involved in adhering wallpaper in a space where a stretch ceiling is present are as follows:

1. In order to level the lag of the material, preliminarily applies a layer of primer. All surfaces are subject to processing: joints, angles and walls – areas in contact with the ceiling structure.

The guidance of the expert! Please be aware that washing the primer presents significant challenges and raises the risk of deteriorating the PVC film. To measure something accurately, you need to know how long the strips are. It is best to cut the rolls beforehand on the floor or on the table.

1. After final drying, the walls are treated with adhesive composition. In this case, there is also a danger of staining a decorative canvas, so you can not do without painting tape here.

The guidance of the expert! The highest level of accuracy must be maintained when using cutting tools, as even the smallest error can harm pricey finishing materials. It is preferable to use a spatula that has been previously pressed up against the wall if there is no trimming.

1. The wallpaper is glued after applying the adhesive. Preliminary leveling is performed under the base of the ceiling zone. You can read about the features of gluing vinyl paintings here-How to properly glue wallpaper on non -woven basis: technology and step -by -step instructions

The guidance of the expert! The best way to cover up the flaws is with a lovely ceiling skirting board. An ornamental border is an additional option.

We advise you to carefully review the video instructions provided below for more clarity. It will provide a deeper comprehension of work finishing technology. Videos that explain how to finish work using technology.

Don’t think the material will withstand as long as other finishing grounds once the room’s finishing work is finished. Indeed, altering the wall decorations is a lot simpler than taking everything apart and reassembling the stretch fabric. Here, it’s crucial to follow this straightforward guideline: it is preferable to proceed cautiously, carefully considering each move.

You could be intriguing: How to apply wallpaper using technology: detailed instructions, picture, and video Three ingredients needed to make concrete by hand: cement, sand, and gravel How do you accurately calculate concrete?

How to select ceramic tiles: qualities, materials, and cladding options

The process of gluing the ceiling

The panels are first trimmed to the proper length. There is a 15 centimeter buffer on either side because the room’s walls aren’t always perfectly parallel. Fitting is required if there is a drawing. The package indicates the height of the rapport.

One benefit of using wallpaper for decoration is that it doesn’t require complicated equipment to function. A basic toolkit is required for the master to have at least:

• Strenger or light table to get to the ceiling;
• plastic spatula;
• rubber clamping roller;
• sharp mounting knife;
• brush;
• ruler and roulette, pencil;
• rolling;
• roller and brush for glue;
• A tool for supporting wallpaper by a partner-for example, a wooden T-shaped mop, the lower part is wrapped with textiles or isolation for pipes.

Wallpaper made of fiberglass is a unique kind of material. The thinnest, most delicate fibers are used to weave them, and they shatter when bent. Because of this, working with such a coating requires protection for the hands and breathing organs; otherwise, skin and nasopharyngeal irritation may occur.

The technology used to adhere wallpaper made of various materials is essentially the same:

1. Cut several stripes, joining the drawing as needed.
2. They smear the inside with glue, if this is provided by the instructions. Then put the wallpaper with the processed side inward so that the ends of the sheet come together, and leave the material to soak.
3. Apply to the ceiling. First, the places at the walls, corners, and then – the rest of the area, smear with a brush.
4. Put the canvas to the ceiling and press. Have a segment so that the allowance evenly settles from different sides. While one master glues the start of the strip, the second supports the free edge with hands or a special tool.
5. The canvas is straightened with a plastic spatula and the air is removed, moving from the center to the periphery.
6. Pass on the canvas with a clamping roller. The material at the edge and at the junctions is especially carefully reduced.
7. If glue has performed somewhere, it is removed with dry clean textiles.
8. Immediately cut the edges. For this, a wide spatula is applied to the material, and excess is cut off the blade. If then they plan to install a skirting board, then they focus on its width.
9. The next strip is also glued. Thin wallpapers are overlapping, dense -. The seams are rolled with a rubber clamping roller.
10. Wait until the glue is completely dry – from 1 to 3 days. The ceiling can be painted.

Certain wallpapers require an impregnation of glue prior to adhesion. The exposure period varies depending on the coating:

• Single -layer paper – up to 5 minutes.;
• dense and embossed paper – 5-8 minutes.;
• vinyl lungs, embossed or silk -screen printing 7-10 minutes.;
• hard vinyl – 10-15 min.

This is how they smear the wallpaper: after dipping the roller in glue, they squeeze it out a little bit while rolling. Applying the mixture to the material’s back causes it to move from the center to the periphery. The edges have been meticulously polished. After that, an accordion is used to fold the wallpaper.

• It is necessary to remove the remains of glue: the upper lighting will emphasize the error;
• The joint of the dense wallpaper will turn out to be neat if you first glue the cloth, and then cut this part in the middle with a sharp mounting knife under the ruler, remove thin waste;
• Wallpaper dries at room temperature, without drafts, so you need to close all the windows and doors;
• It is impossible to accelerate the process, drying with heating devices, since the clutch of the canvas with the ceiling will worsen;
• A seam on wallpaper for painting can be made less visible if you use the finish microshpaklevka-Sadolin, Sheetrock, Rotband Pass. The composition is used after the first layer of paint.

Different construction crews are involved in the assembly of the structure above the head and the installation of the trellis on the partitions. You have to put in a lot of work so as not to deface the work of earlier performers. There’s a chance that the repaired film will tear or discolor the pasted surfaces.

Stretch structures are freed from vinyl canvas or knit fabric. On the profile, raw materials are fastened to the walls and the ceiling. Heat gun installations are done by professionals using specialized equipment. The film stretches because of the high temperature, making it easier to fit the features of the area above the head. The raw materials return to their original state (compressed) upon cooling.

View of TTS-3 TTS-3 heating venture

View of TEPK-2 thermal gun

View of TEP-24000K Electric gun

TEPK-5000K View of an electric gun Electric firearm TEPK-2000K View

View of TEP-5000K Electric gun

View of TEP-9,000

View of TEP-3000 electrical gun

TEP-2000 View of an electric gun

Heat gun with gas TGP-50000 See Every Sentence

Stretch ceilings’ primary disadvantage is their sensitivity to mechanical harm. It is simple to cut the canvas with a screwdriver or spatula moved incorrectly. Splashes from putty and glue are easily noticeable on ornamental surfaces, particularly glossy ones. The vinyl models will need to be altered or have flaws hidden, and the installer can clean tissue species.

Traditional trellises: canvases rolled up and twisted for ease of use. The material is released on various schedules, which influences how decorative and how it is installed. The wallpaper needs to dry in a draft-free room for five to seven days after it is adhered. The decoration will start to lag or fall off in the event of a technological violation.

The trellis’s primary weakness is its low strength. Exposure to mechanical forces tears even the most resilient models. Dust that is released into the air during wall drilling is absorbed by the material. Vinyl species are distorted when using a heat gun and raising the temperature to +80 C.

The choice of whether to put in ceiling plinths or wallpaper first can have a big effect on how your room looks overall. Every approach has benefits, and the optimal option will rely on your own requirements and tastes. You can guarantee a polished and seamless appearance by making an informed decision by being aware of the advantages and disadvantages of each method.

It’s common practice to install the ceiling plinth first because it leaves the top edge of the wallpaper with a cleaner finish. By using this technique, you can make sure that the wallpaper doesn’t interfere with the plinth’s secure attachment to the wall. For a more polished look, any spaces left between the plinth and the ceiling can also be painted and filled in before the wallpaper is put up.

However, it may be simpler to achieve a tight, flush fit around the edges if wallpaper is applied first. By using this method, you can avoid cutting and fitting wallpaper around the plinth, which can be a difficult and time-consuming process. Furthermore, hanging wallpaper first makes it easier to remove and replace without damaging the plinth if you decide to change it later.

In the end, each approach has advantages, and which one you choose will depend on your preferences and the particulars of your project. Think about the finish you want, how simple it will be to change the wallpaper in the future, and how comfortable you are with installation methods. By considering these elements, you can select the arrangement that works best for your space and create a polished, expert appearance.

Video on the topic

Ceiling skirting board for wallpaper.

Ceiling baseboard: installation

Wallpaper trimming at the ceiling skirting board (baguette, molding, cornice) Issue No. 5

Proper trimming for baguette and skirting boards. (plinth? what x…)

Glue ceiling skirting boards for wallpaper. Nuances.