Tile glue junis – types, characteristics, instructions for use

Any tiling project requires tile glue to ensure that tiles are firmly adhered to surfaces. Renowned for its dependable and superior tile adhesives, Junis is one of the most well-known brands on the market. Whether you’re working on floors, walls, or even outdoor projects, Junis has a variety of tile glues designed to meet your needs.

Junis tile glue comes in a variety of varieties to meet different needs, from light applications to high-strength installations. Every variety has special qualities, like formulas that set quickly, increased flexibility, or greater bonding strength. Recognizing these variations enables you to choose the best product for your specific project, guaranteeing longevity and a polished appearance.

It’s simple to use Junis tile glue, but for optimal results, make sure you follow the manufacturer’s instructions. A successful tiling job is largely dependent on precise application techniques, accurate mixing ratios, and proper surface preparation. You can guarantee that your tiles stay securely in place and look fantastic for many years to come by following these instructions.

Type	Characteristics	Instructions for Use
Junis Standard	Good for indoor use, suitable for ceramic tiles	Mix with water, apply evenly on surface, press tiles firmly
Junis Extra	Enhanced adhesion, suitable for heavy tiles and outdoor use	Mix with water, apply on clean surface, place tiles and align
Junis Rapid	Quick setting, ideal for fast projects	Mix with water, apply quickly, set tiles within 10 minutes

Peculiarities

Cement, chemical ingredients, and mineral additives are all present in unis tile. As long as the temperature indicators are between -5 and +30, it displays all the positive aspects. When a solution is properly prepared, it keeps its best qualities for three to five hours, making work easier. It stays waterproof and plastic after application.

Once this glue has been applied, you can continue making adjustments for ten to twenty minutes. The base can then be loaded after the composition is completed throughout the day. The company’s Unis glue has the best qualities to work under different circumstances. Choosing the right glue for the job is all that matters.

The scope of application

Unis glue is appropriate for the following surfaces:

• Gypsum.
• Concrete.
• Brick.
• Cement.
• Asphalt and others, depending on the purpose.

Advantages and disadvantages

The Unis compounds’ strong adhesive qualities and relatively high strength will be their main advantages. With almost any surface on which tiles are laid, glue provides a dependable clutch. Both at high and low temperatures, it maintains its properties. There are limitations, though, ranging from -5 to +30 degrees.

Citation! Different kinds of glue can be used in harsh weather conditions and are resistant to frost.

The environmental friendliness of the compositions from Unis is supported by the pertinent certificates. Schools, kindergartens, and medical facilities can all use glue. The benefit lies in glue’s low consumption and ease of use, which is crucial. 2 to 3.5 kg per square meter is its equivalent.

Because every composition is different and each series of funds from UniS has distinct technical qualities and application features, there are drawbacks that should be taken into account.

Technical features

Features of Unis Plus, the composition that is most widely used:

• The temperature regime of work -from -5 to +30.
• Consumption – about 3 kg per meter.
• Permissible correction time – 10 minutes.
• Full stagnation – 24 hours.
• Packing – 5, 25 kg.
• Frost resistance – from 35 cycles.
• The thickness of the application (optimal) – up to 15 mm.
• Mixing – on 5 parts of the mixture 1 part of the liquid.

Types of adhesive mixtures from junis

Popular glue plus is one of the company’s universal funds. Both internal and external works can be done with it. It showed up nicely on uneven surfaces. It is not advised to use it on chimneys, furnaces, or pools, though.

The most forward-thinking glue uses new technologies to prepare. Starting from the ceiling, it can be used for cladding from top to bottom. Its properties are retained for five hours after mixing. Granite tile adhesive is designed especially for use with natural stone. It stands out for having exceptional strength, which enables you to put heavy operational loads on it.

There is tile glue junis Belfast, specifically for surfaces that come into contact with water. It works perfectly with transparent tiles, marble, and mosaics.

Plus

Unis Plus glue has unique qualities that make it suitable for a variety of tasks. It is frequently applied to mosaics, porcelain, stone, and tiles.

Differentiated by increased strength and water resistance. It is advised to use for both exterior and interior projects, particularly when putting in a heated floor. can be styled using the previous methodology.

Counseling! For the continuous coating, such as on concrete, gypsum, brick, or cement, tile glue plus is required. Better if it has sufficient strength.

2000

Up to 60 x 60 porcelain tiles can be used with Unis 2000 tile. It is possible to clad both indoors and outdoors. The composition can be used as a reference point. He fills in roughness and unevenness qualitatively. applied to gypsum and cement.

Features that set glue unis 2000 apart:

• The optimal seam applying thickness will be from 3 to 15 mm.
• Sold for 5 and 25 kg.
• You can work with the material for 10 minutes after application.
• The duration of operation is 3 years.
• Can be used at temperatures from -50 to +50.

21

Tiles are installed on the walls and floor using Unis 21 adhesive. It is appropriate for use in highly humid rooms. can apply up to 30 cm of porcelain tile.

Citation! The Moscow Plant manufactures Unis 21, which is only suitable for indoor cladding.

Technical characteristics of the piece dubbed Unis 21:

• Layers – up to 15 mm.
• Frost resistance – more than 35 cycles.
• Drying – a day.
• The working period after applying the mixture – 15 minutes.
• Operating conditions -from -50 to +50 degrees.
• Packaging – 5 and 25 kg.

Hi Tech

This brand makes glue from junis especially for challenging tasks. This composition makes it feasible to install something from the ceiling down, working your way up.

The material is consumed on average, ranging from 2 to 4 kg per square meter. The glue is made according to standard procedure, which calls for using one part liquid to five parts dry mixture. After applying the composition, you have fifteen minutes to make any necessary corrections. Layer of sample: up to 15 mm. The product is made in 15 kg bags. You can use the cooked mixture for five hours.

Citation! It will take one mixture bag to lay seven meters.

Granite

Large granite and natural floor stones are compatible with Unis granite. It can be applied to walls, floors, and basements. can be applied to old material and used to warm floors. A thick mass called glue keeps objects from sliding off the walls. It adheres with a comparatively high degree.

Additional features of Yunis granite adhesive include:

• For cooking, you need to dilute 1 part of the water into 5.5 parts of the mixture.
• Standard consumption – up to 3.5 kg per meter.
• After application, you can adjust the position for 10 minutes.
• Primary stagnation of the solution occurs in 25 minutes.
• Operating the coating is permissible a day after work.
• Sold in bags of 25 kg.

Belfix

When using standard cement mixture for cladding, Belfix tiles from Junis are utilized. This arrangement is a mass of white. It works well with marble, natural stone, and mosaics. improved elasticity and resistance to extremely low temperatures distinguishes it. Belfix is frequently applied to warm floors, walls, and pools. High humidity conditions are ideal for glue. Use it as a seam grout and both indoors and outdoors.

Belfix Unis’s features include:

• Prepared from 5 parts of dry composition and 1 part of the liquid.
• Permissible temperature -from -50 to +70 degrees.
• You can load the base after 24 hours.
• Standard consumption – up to 3.5 kg per square meter.
• The thickness of the layer does not exceed 10 mm.
• The prepared mixture is suitable for 3 hours.
• You can correct errors within 15 minutes.

Fix

Fix is not very common; it is not frequently found on the shelves of building supply stores. Its affordability will be a feature. Experts claim that this glue is not the most dependable. Typically, it is utilized for facades, balconies, terraces, kitchens, and bathrooms.

Qualities of Junis’ FIX glue include:

• Permissible thickness – up to 15 mm.
• Standard mixing – 5 parts of the mixture per part of the liquid.
• Sold 25 kg.
• The correction of the situation is permissible for 10 minutes.
• The load is permissible after 24 hours.

Pool

The pool adhesive is designed for use with ceramics, mosaics, and stone, and it is primarily used for pools and water tanks in high-humidity environments. Both interior and exterior use is acceptable. Suitable for old tile and warm floors as well.

Characteristics of the composition pool:

• Standard mixing – 5 parts of the mixture per part of the liquid.
• Tride correction is carried out for 10 minutes.
• Loading the surface is permissible 24 hours after work.
• The mixture retains the properties of 3 hours.

Horizon

One uses the horizon as a kind of liquid linoleum. Because the mixture produces a seamless coating, bulk floors are the intended application. The horizon is a universal tool that can even out the coating where there is a height differential.

In three hours, the flooded composition solidifies. The device is well-suited to mechanical loads and can tolerate moisture. The mixture can also be applied when installing a heated floor.

Teplokley

The purpose of the heating tool is to isolate and strengthen. Fit for porcelain tiles, stone, glass wools, and reinforcing layers. He has shown himself to be a capable decorator of fireplaces and stoves. It stands out due to its high elasticity.

Rapido

Rapido glue is a new product from Junis that can be used to install any kind of ceramic or clinker tile, as well as porcelain tiles up to 60 by 60 centimeters and natural stone. Suitable for use in any type of humid room. withstands both heat and cold. used both inside and on facades of buildings. It can be used on the outdated tile and is appropriate for installing a heated floor.

Characteristics of the June Rapido composition:

• Temperature conditions -from -40 to +70 degrees.
• Frost resistance – from 100 cycles.
• Correction after applying a substance is possible within 10 minutes.
• With a layer thickness of up to 6 mm, you can load the surface after 3 hours.
• Packing in packages of 25 kg.
• Layer – up to 10 mm.
• Recommended work temperature – OO +5 to +30 degrees.

U-100

The U-100 high-elastic adhesive is ready for use with any type of stone, ceramic, clinker, or porcelain tile. Glue can be used to clad floors, walls, and basements and can withstand heavy loads. It is frequently utilized for facing parking lots, subway stations, and underground crossings in addition to industrial and administrative buildings.

• Suitable for different types of tiles.
• It is characterized by increased elasticity.
• Well suited for places with high cross -country ability.
• Suitable for industrial and residential premises.
• Working temperature range -from -60 to +120 degrees.
• Laying tiles is recommended in conditions from +5 to +30 degrees.
• You can adjust the tiles after application for another hour.
• Frost resistance – from 100 cycles.

Maksiflex

MaxiFlex’s super-elastic adhesive for deforming bases is another innovation. suitable with all varieties of porcelain, ceramics, and artificial and natural stone. Ideal for both exterior and interior projects. It is utilized in basements, stairwells, terraces, and balconies.

Technical attributes of the MaxiFlex composition:

• Consumption – up to 1.25 kg per square meter.
• Settles 20 kg.
• Withstands from 100 freezing cycles.
• You can load the surface 24 hours after the work.
• Layer thickness – no more than 1 cm.
• Operation temperature -from -40 to+100 degrees.

Super plus

Adhesive Super Plus is suitable for any kind of tile up to 70 cm in diameter. Ideal for spaces with higher relative humidity levels. Suitable for industrial use when higher loads are required. It endures variations in deformation. Resistance to temperature instability is another characteristic.

Super Plus Features:

• For preparation, you need to take 6 parts of the mixture for part of the water.
• Withstands from -40 to +80 degrees.
• Adjustment is possible within 20 minutes after applying the composition.
• Consumption – up to 1.4 kg per meter.
• Frost resistance – from 100 cycles.
• Settles 25 kg.

Preparation

The following is how the coating is made:

1. Old material is removed (screed or plaster).
2. Aligned, there remain permissible drops no more than 1 mm per meter. Defects, more than 1 cm deep, need to be placed in plaster. It is recommended to use the product from the manufacturer for this purpose – standard, silin or heat.
3. To increase the adhesion every 50 mm, notches are made in a checkerboard pattern.
4. The surface is dried and treated with a degreasing agent.
5. In rooms with high humidity, it is recommended to use the isolation of the unis hydroplast.
6. Surface processing is performed twice to increase adhesion.
7. Before work, tiles and foundations do not need to be wetted.

Counseling! Working with compositions made from junis requires a temperature range of +5 to +30 degrees and a maximum humidity of 75%.

Prior to applying glue, the base needs to be low-fat and dry. Not only must the outdated material be removed before beginning work, but any other obvious pollutants that could impede proper clutch operation must also be eliminated.

With different types available to meet specific needs, Junis tile glue is a versatile adhesive that is ideal for a variety of tiling projects. With distinctive features like improved strength, rapid setting, or water resistance, each variation is appropriate for a variety of settings. Junis tile glue is easy to use; just prepare the surface, mix the glue according to the directions, apply it evenly, and carefully place the tiles. This guarantees any tiling project a long-lasting, expert finish.

Instructions for use

The following is the process for preparing the mixture:

• Pure capacity and tools for kneading are prepared.
• The dry part is covered in a container and poured with water (in the proportions indicated in the instructions).
• The solution is mixed for several minutes until the desired consistency is obtained.
• After the solution should stand slightly, no more than 5 minutes, then overdid it again.
• Manual tools and drill at low speeds can be used for mixing.
• The prepared mixture must be used for 3 hours (for individuals in 5 hours).

Citation! Inaccurate proportions and disregard for kneading instructions have an impact on glue quality. Other properties deteriorate and adhesion gets worse.

Guidelines for completing the base’s composition:

• Using a spatula, a composition is applied by 3-15 mm, then it is leveled with the same spatula or grater.

• For porcelain border and large plates, the size of the cloves should be large, from 8 mm. The weight of the cladding should not exceed the permissible.

• Tiles are pressed on the applied composition. It is important to ensure that the glue is distributed evenly under it. It is necessary to prevent the appearance of voids. To get a good result, professionals advise fixing with wave -like movements.

• It is necessary to apply a small amount of glue so that during the application of the tiles other areas do not lose vitality (the time is indicated in the instructions, usually up to 20 minutes.)

• When working outside or for large plates, you need to apply glue and tiles.

• After facing for another 20 minutes (for individual compositions less), the position of the tiles can be adjusted.

• Only 24 hours after work can you proceed to grout and load the surface.

• When installing a warm floor, it can be operated after 28 days.

Tips for professional masters

You must adhere to the safety guidelines and general work recommendations in addition to the instructions specific to each product. If you have any questions, it is best to consult a specialist or contact the manufacturer right away.

Experts advise against doing the following when handling glue:

• It is better to stir the composition with a manual method or a mixer at low speeds. The more actively mixing the glue, the less the term of its viability.
• The wider the tiles, the longer the cloves of the spatula should be.
• For the best appearance, instead of plastic crosses, you can use clamps, especially for this intended. Thus, the seams will be identical.
• You never need to apply glue over the entire surface, since after 20 minutes it will become unsuitable for gluing tiles. You need to calculate in such a way as to have time to glue the site in 15 minutes.

Tile adhesive A variety of choices are available from Junis to satisfy different tiling requirements. A particular Junis adhesive is designed to create robust and long-lasting bonds, regardless of whether you’re working with ceramic, porcelain, or natural stone tiles. Knowing the various varieties on the market enables you to select the best product for your specific project, guaranteeing durability and visual appeal.

Because of their qualities, Junis tile glues are a dependable option for both experts and do-it-yourselfers. Strong adhesion, high flexibility, and outstanding water resistance are typical characteristics of these adhesives. Additionally, they are made to be simple to combine and apply, which streamlines the tiling procedure and raises the caliber of the final product.

For Junis tile glue to work as well as it can, it is imperative that you follow the usage instructions. Essential steps include accurate mixing ratios, precise application methods, and proper surface preparation. Your tiles will be firmly fixed and stay in place for many years if you carefully follow the manufacturer’s instructions.

All things considered, Junis tile glues are a flexible and trustworthy option for a range of tiling projects. Their specialized formulations, durable qualities, and simple application procedure make them the preferred choice for anyone wishing to confidently take on tiling work. With a little selection and adherence to usage guidelines, you can easily produce results of a high caliber.

Video on the topic

How to hold a surface cladding with mosaic tiles? | Unis U-200 Whiteflex

How to properly apply tile glue to tiles or walls

Good tile glue