Tile glue “EK 3000” – varieties, working properties, scope of application

For anyone starting a tiling project, whether it’s new construction or a home renovation, tile glue is a need. Known for its dependability and versatility, "EK 3000" is one of the best options available on the market right now. This tile adhesive is a go-to choice for both professionals and do-it-yourselfers because it comes in a variety of types designed to meet different needs.

You can choose the best EK 3000 tile glue for your particular project by being aware of its available varieties. There are options made for various tile kinds, surfaces, and circumstances. Depending on whether you are working with natural stone, porcelain, or ceramic tiles, a particular EK 3000 adhesive will guarantee a strong and long-lasting bond.

EK 3000 tile adhesive is well known for its superior performance characteristics. Strong adhesion, simplicity of application, and an adjustable setting time allow for modifications to be made during installation. It is also highly resistant to moisture and temperature fluctuations, which makes it appropriate for a variety of settings, such as kitchens, bathrooms, and outdoor areas.

EK 3000 has a wide range of applications, including both commercial and residential projects. Owing to its versatility, it can be applied to a wide range of surfaces, such as plaster, concrete, and even pre-existing tiles. You can guarantee a flawless finish and long-lasting results for your tiling project by selecting the appropriate variety of EK 3000.

Scope of use

When laying a small tile with weight and dimension requirements, the use of Tile Adhesive "EK 3000" is pertinent. When gluing any stone product with a moisture absorption level of no more than 1%, the adhesive composition recommended by the manufacturer should be used.

Tiles can be adhered to the following kinds of surfaces using this composition:

• Concrete.
• Foam concrete.
• Plastered.
• From brick, natural or artificial stone.
• Other types of surfaces that can withstand the weight of the laid tile.

Crucial! When putting stone facing materials on the floor in rooms with floor heating systems, EK 3000 glue is acceptable.

Working properties and operational characteristics

The following is a description of how these products function in relation to the tile glue "EK 3000":

• The thickness of the adhesive layer (recommended by the manufacturer): 4-5 mm.
• Color: Gray.
• Recommended operating temperature: from +10 to +25 o C.
• Duration of solidification of the applied mixture: about a day.
• Adhesion power: about 1.0 MPa.
• The readiness of the adhesive composition: 4 hours.
• The ability to adjust the stacked tiles: within 15-20 minutes.
• 1 kV consumption.m.: about 2.5-3 kg of prepared composition.

Crucial! You can align small imperfections on the wall and floor surfaces (no more than 12–15 mm) with the aid of EK glue.

How to prepare the base for applying the glue "ek"?

A black surface must be ready before using the tile glue "EK 3000." It should ideally be perfectly clean, 100% even, free of fat and oil stains, and free of the remains of previous cement solutions and finishing materials. The quality of the tile clutch with the surface will be significantly reduced if there are drawbacks, so more care must be taken when cleaning and aligning the draft base.

Crucial! It is advised to fill any cracks and potholes in the draft base that are deeper than 4-5 mm with plaster composition. The black base needs to be pre-primed if it is porous.

How to prepare a glue solution?

You should not add more than 6.3–7 liters of water if the glue for the EK 3000 tile is used up completely from its packaging. According to the manufacturer, you should start with 5.5–5.8 liters of water and add more gradually until the mixture reaches the required density.

Using a drill or mixer, the solution must be interfered with. Mixing needs to be done continuously until the mass is uniform and lump-free. It will require five to six minutes.

Crucial! It is advised to let the solution brew for ten to fifteen minutes after finishing the preparation so that the plasticizers and other additives can swell. For three to four hours, use the prepared solution.

How to work with glue?

An old-fashioned gear spatula should be used to apply the cooked glue "EK 3000." Apply adhesive solution to the entire wall right away. For ten to fifteen minutes, only the portion of the surface that will be tiled should receive the solution. There is no need to wet the tile itself in any way before using it.

It is advised to work with EK glue in the following order:

1. First, it is necessary to apply the EK 3000 glue to the wall section using a gear spatula.

2. The tile must then be adhered to the prepared surface by slightly pressing it with your hands.

3. The tiles can be moved around right away or wait ten to fifteen minutes after they are glued together. After that time, it is impossible to move the tiles around; if they end up uneven, the tile must be taken apart, the base must be cleaned of the layered solution, and the process must start over.

4. Neighboring tiles need to have their seams cleaned after they are glued together. Grout must be used to seal the interseamy seams only after the adhesive composition has dried completely, which should happen in one to two days.

Crucial! If EC glue is used to install tiles, the floor can only be loaded 24 to 36 hours after the job is finished—that is, you can’t walk on the floor until the adhesive solution has fully set.

Precautionary measures

Because the dry mixture of EK glue contains special cement and other additives, the mass will be extremely alkaline during the solution preparation process. As a result, skin contact with the prepared mixture is not possible.

If any of the final mixture gets on the skin, this area needs to be cleaned right away with warm running water. It is advised to use a respirator, safety glasses, and rubber gloves when performing installation work.

"EK 3000" tile glue is an adaptable adhesive solution that is well-known for its robust bonding qualities, simplicity of application, and appropriateness for a variety of tiling tasks. It is available in multiple varieties to suit different surfaces and climates, guaranteeing dependability and longevity whether it is utilized in kitchens, bathrooms, or outdoor areas. This article examines the various EK 3000 varieties, their special qualities, and useful advice for getting the most out of your tiling projects.

Guarantees and storage

EK glue can be kept for six to nine months at home in a dry, dark place if the packaging is undamaged. It shouldn’t be wet in the room. Additionally, make sure the packaging is sealed tightly to prevent moisture from penetrating and making the dry mixture unusable sooner rather than later.

Additionally, when transporting this adhesive composition, care should be taken to prevent the packaging from being exposed to extremes in temperature, high humidity, or liquid infiltration.

Variety	Description
EK 3000 Standard	Basic tile adhesive for indoor use. Suitable for ceramic tiles and small porcelain tiles.
EK 3000 Flex	Flexible adhesive ideal for areas with temperature fluctuations. Works well with large tiles and natural stone.
EK 3000 Rapid	Fast-setting adhesive for quick projects. Allows for grouting in a few hours.
EK 3000 Outdoor	Designed for exterior use. Weather-resistant and perfect for terraces and balconies.
EK 3000 Heat	Heat-resistant adhesive suitable for fireplaces and underfloor heating systems.

The tile adhesive "EK 3000" is a dependable and adaptable adhesive that can be used for a variety of tile projects. Its variety of options enables customized solutions to satisfy particular requirements, whether they relate to various tile kinds or indoor or outdoor use. It is a preferred option for both professional contractors and do-it-yourselfers because of its versatility.

Impressive is how well "EK 3000" functions. Because of its strong adherence, tiles will stay firmly in place over time. In order to preserve the integrity of tiled surfaces in bathrooms, kitchens, and outdoor spaces, the glue also offers exceptional resistance to moisture and temperature changes. Its simplicity of use also saves time and effort, which improves the efficiency and smoothness of the tiling process.

In terms of application scope, "EK 3000" demonstrates remarkable adaptability. It is compatible with a wide range of substrates, such as existing tiles, plaster, and concrete. Because of its versatility, it can be applied in a variety of contexts, ranging from extensive commercial projects to home makeovers. "EK 3000" is a dependable solution that can be used for both new tile installation and repair, catering to a wide range of tiling needs.

In conclusion, tile glue "EK 3000" is a great option for a variety of tiling projects because it combines strength, ease of use, and versatility. Because of its durability and versatility, tiled surfaces will continue to be both aesthetically pleasing and practical for many years to come. Because of this, "EK 3000" is an invaluable tool for any tiling arsenal.

Video on the topic

Video review about the tile clay EK 3000

Tile adhesives ek

EU 3000 tile, production of Krasnodar.

EC 3000 glue test

The cheapest tile glue ! Plasticizer for the solution. What are the properties??? Stages of repair of Volgograd

Subtleties when laying a large format, tile glue novelty!