Your tiles can look brand-new and contemporary after applying a tile coating, instead of old and worn. The correct coating can significantly improve any surface, including kitchen backsplashes, floor tiles, and bathroom walls. This tutorial will lead you through the necessary actions to obtain a polished appearance.
Make sure your workspace is well-ventilated and that you have all the materials you’ll need before starting. The right tile coating, a good primer, cleaning agents, and safety equipment are required. Before beginning the coating process, make sure to thoroughly clean the tiles and fix any chips or cracks.
Applying a tile-specific primer is the next step. This guarantees a longer-lasting finish and improves coating adhesion. Applying the tile coating can begin as soon as the primer dries. Apply the coating evenly with a brush or roller, being careful to adhere to the manufacturer’s recommendations for drying times and the quantity of coats needed.
Before using the space, let the tiles completely dry after the last coat is applied. It might take a few days, so allow time for this. After drying, your tiles will have a brand-new appearance that, with the right maintenance, can last for years. Maintaining the finish and maintaining the best-looking tiles can be achieved through routine cleaning with non-abrasive cleaners.
Areas of application and technical parameters
Such coatings are applied using tile varnishing:
- Ceramic tiles of an absorption type (for example, Tuscan tile, terracotta, etc.P.);
- lining with seams based on cement grout;
- cladding of natural stone or brick;
- concrete floors, coatings from natural and agglomered stone, as well as paving slabs and t.P.
Typically, this kind of varnish is created using acrylic and tiny ceramic particles added to it. Moreover, urethic polymer dissolved in aliphatic solvents may be present in tile varnish.
The treated surface becomes glossy and much stronger after drying, which helps shield it from mechanical damage.
To be content ↑
Tips for use
If the Tuscan tile, terracotta tiles, or any other highly absorbent coatings are varnished, the varnish should not be applied until the regular glue has fully set. If not, there is a risk of the tile fading. You might have to wait a few months in certain situations. The waiting period is drastically decreased if cement-based adhesives are used for the laying on dry screeds.
It is not necessary to apply the varnish in a thick, even layer. You can use a piece of fabric for this operation. Preventing influxes that are particularly noticeable on light coating is crucial in this situation.
Be advised that paintwork (LKM) should not be applied to surfaces whose bases are inadequately isolated from moisture.
Instructions for use
The tile needs to be completely dry, devoid of any dust or other pollutants. Make sure all cement residue is gone and that the seams are level. Complete floor cleaning is required before varnishing can begin.
Applying varnish
LKM needs to be applied using a spotless soft cloth. Nothing should be piled on top of the fabric. A gentle brush can also be used. Each square meter, the flow consumption of tiles ranges from 100 to 200 grams. Evenly apply varnish. It is incorrect to apply varnish directly to the tile, as this will cause influxes and stains to form once the varnish is applied to the surface.
You must give the composition several minutes to absorb after applying the layer. Using a rag, you must then remove any leftover varnish. If the material from the quantity of highly absorbing (terracotta, Tuscany tiles, etc.P.) tile needs to be processed again in order to obtain the intended outcome. Only a gentle cloth can be used to apply the weakly absorbent tile composition, preventing the vagues that visually detract from the floor.
You can stroll along the floor 12 hours after it has been processed. The varnish application process for wall tiles follows the same guidelines as for floors.
Before placing Tuscan tiles and other readily absorbent materials on glue-based glue or before sewing seams, tile varnish can be used as a preliminary varnish. These steps will make cleaning the completed tile easier. However, since this will cause the material to fade, preliminary processing is not required when laying terracotta as a construction solution.
Take note: Tile varnish’s consumer qualities last for one to three years.
After working, turpentine or other solvents can be used to clean hands, tools, and work clothes.
Your tiles can be transformed and given a new, long-lasting finish with tile coating. Simple steps for applying a tile coating are outlined in this article, including how to prepare the surface, choose the appropriate supplies, and apply the coating uniformly. Whether you want to protect your bathroom tiles or update your kitchen backsplash, these simple steps will help you get professional results that will make your tiles look amazing and last longer.
Safety instructions
The following safety guidelines should be observed when working with LKM:
- It is necessary to use protective glasses and gloves;
- It is also advisable to use a respirator;
- LKM can only be stored in a cool room;
- You can not smoke near an open container with varnish or maintain an open flame where it is varnished;
- The remnants of LKM are categorically not recommended to be thrown into the sewer;
- The room where the varnish is stored should have ventilation or good ventilation.
| Step | Instructions |
| 1 | Clean the tiles thoroughly to remove any dirt or grease. |
| 2 | Sand the surface lightly to help the paint adhere better. |
| 3 | Apply a primer suitable for tiles and let it dry completely. |
| 4 | Paint the tiles with your chosen tile paint using a brush or roller. |
| 5 | Allow the paint to dry fully, then apply a second coat if necessary. |
| 6 | Seal the painted tiles with a clear sealant for added protection. |
The application of a tile coating can give your area a modern, refreshed appearance. Even if you’re doing the project yourself, you can still achieve a professional finish by following the instructions in this guide. The coating will adhere better and last longer if your tiles are cleaned and primed correctly.
It’s crucial to select the appropriate products for both the type of tile you have and the environment it’s in. Kitchens and bathrooms, for instance, need coatings that can resist moisture and regular cleaning. If you want to prevent peeling and wear over time, always use premium paints and sealants made just for tiles.
When applying the coating, take your time, making sure it dries completely between coats. Hastily completing this process can result in less durable finishes and uneven surfaces. For a polished and polished appearance, use the proper tools, like brushes and rollers made for tile surfaces.
Upkeep of your freshly coated tiles is simple but necessary. Frequent cleaning with non-abrasive cleaners will preserve their appearance and shield the coating from deterioration. Your tile coating can look vibrant and well-maintained for many years with the right maintenance.
