For tiled surfaces to be long-lasting and resilient, tile adhesives are essential. Ceresit stands out among the many brands available for its high-quality products that meet different needs related to tiling. Whether you’re remodeling a kitchen, bathroom, or other space, knowing the various Ceresit tile adhesive kinds and how to use them will help your project go more smoothly and successfully.
Tile adhesives from Ceresit come in a variety of varieties, each intended for use with specific tile and surface types. Ceresit adhesives are suitable for a wide range of materials, including porcelain and natural stone, as well as more difficult materials like regular ceramic tiles. Your tiles will remain in place for many years to come thanks to the strong bonding, flexibility, and moisture resistance that these adhesives are designed to offer.
It’s simple to use Ceresit tile adhesives, but for optimal results, always adhere to the manufacturer’s instructions. This entails appropriately preparing the surface, blending the adhesive to the appropriate consistency, and applying it. By doing this, you can prevent common problems that could damage the integrity of your tiling work, such as tiles slipping or adhesive that doesn’t set properly.
The various Ceresit tile adhesive types that are available will be discussed in this article, along with detailed usage instructions. This guide will assist you in choosing the best adhesive for your project and guarantee a flawless finish, whether you’re a professional tiler or a do-it-yourself enthusiast.
- Scope and variety of adhesives
- Types and technical characteristics
- Ceresit CM 9
- Ceresit CM 11 Plus
- Ceresit CM 12
- Ceresit CM 14 Extra
- Ceresit CM16 Flex
- Ceresit CM 17
- Ceresit CM 115
- Ceresit CM 117
- Material consumption
- Video on the topic
- Glue for tiles Ceresit cm 17
- Ceresit CM 11 glue
- Review. Ceresit CM 17. Glue for tiles. Tile tiles.
- Cerezite. See 11 that he glues?
- Glue for tiles Ceresit CM 11. Instructions, application.Laying tiles
Scope and variety of adhesives
Dry construction materials Henkel produces "Cerezit," which are used for both interior and exterior work, walls and gender, and various foundation types. There is a vast array of tile adhesives available for purchase, including both general and specialty types. The range of applications for each "Cerezite" compound varies, and they are all marked with the following information to make it easier to identify their intended use:
- Cm – building mixtures for fixing ceramic tiles;
- SV – adhesives for fragmentary repair of the lined surface;
- ST – mixture for the installation of external (facade) thermal insulation.
The funds have a distinct purpose, and the user can always identify the best course of action. Conventional CM brands exhibit excellent adherence when applied to brick, concrete, and porcelain tiles, mosaics, and rooms as well as public spaces (for instance, "Cerezit SM 110"). Certain adhesives can be used in bathrooms and other damp areas because of their resistance to moisture. On surfaces that are prone to vibration and shrinkage, elastic adhesives will help hold the finishing material in place. Additionally, the SM series offers specialty adhesives for:
- floor large -format tiles;
- mosaics and marble (white adhesives);
- clinker;
- facade tiles.
The ST line consists of both completed goods and dry mixes for external breeding. The following compositions are the most widely used builders:
- CT 84 polyurethane glue for polystyrene foam (used in the installation of external thermal insulation of the facades);
- CT 190 plaster-red mixture (CT190 is used for the installation of mineral wool plates and the basic plaster layer for facade thermal insulation);
- CT 85 plaster mixture for polystyrene foams (for internal and external works).
Acrylic and other mounting adhesives are produced in the cylinders used in the SV series 10-100, which can be used both inside and outside of a room. All of these adhesives can only be used to attach tiles and thermal insulation materials; other coatings should only be laid with specialized compounds (use UK 400 for PVC and linoleum, for example). Every glue comes with a certificate of conformance attesting to its excellent quality.
Types and technical characteristics
A range of adhesives from "Cerezit" are used in tile work. While some products are also offered in smaller packs of 10 kg, the majority are sold in packages weighing 25 kg.
Ceresit CM 9
Among its counterparts, this material is among the least expensive; its level of surface adhesion is average. It is used to adhere glazed, terracotta, and tile up to 30 by 30 centimeters to walls and floors. Ceresit CM9 glue can be used in wet rooms because of its adequate moisture resistance.
Brickwork will be securely held in place by the product, which can serve as a stand-in for regular cement mortar because of its polymers and mineral components. Because of its low resistance to frost, it cannot be used for external work. The best glue is suitable for cement-cement and cement-sand plasters that have been aged for at least 28 days. It also works well on concrete bases.
Technical details cm 9:
- packaging – bags of 25 kg;
- dry mixture density – 1.4 kg/cube. DM;
- Tile sliding – up to 0.1 mm;
- adhesion – 0.5 MPa;
- temperatures during work -+5 …+30 degrees, operation – 0 …+70 degrees;
- humidity during work – up to 60%;
- The viability of the solution is 2 hours;
- Tile adjustment time is -10 minutes;
- Switch grouting period – 2 days.
The amount of material used per square meter varies depending on the tile size and spatula tooth; it can range from 2 to 4.2 kg.
Ceresit CM 11 Plus
Ceresit CM 11 Plus’s composition is regarded as classic; it is most frequently utilized for porcelain tile installation in both interior and exterior projects. Many minerals and modifying additives found in glue offer a high degree of adhesion to a variety of non-forming bases:
- concrete;
- cement coatings;
- cement-ledge screeds;
- brickwork and t. D.
CM 11 adhesive works well for applying stickers to walls and floors inside buildings that are less than 50 by 50 centimeters, with the exception of marble. Porcelain tile can also be laid with it for interior projects. The tool can be used to install coatings for waterproofing, heating floors, basements, external stairs, and various deforming bases, such as drywall and chipboard, by adding a special elasticifier, CC 83. Furthermore, the addition of an elastifier enhances the qualities of glue and its application in cellular concrete, painting coatings, and gypsum.
The glue cm11 has the following qualities:
- Consumption 1 m2-1.7-55 kg/kV. m (depending on the size of the tiles, spatula teeth);
- The viability of the solution is 2 hours;
- adjustment time – 20 minutes;
- The readiness of the tile for grouting seams is 72 hours;
- Tile sliding – up to 0.5 mm;
- adhesion – 1 MPa;
- The temperature of the solution is+5 …+30 degrees, operation –50 …+70 degrees.
Glue can readily endure 100 freezing/thawing cycles and is therefore frost-resistant. Furthermore, the product is waterproof and can be used on walls and the pool bottom (with the addition of an elasticifier).
Ceresit CM 12
A specific mixture called Cerezite CM 12 porcelain tile glue is used to adhere large-format floor tiles. He can firmly support plates up to 60 by 60 centimeters in size, but he is only appropriate for unformed bases made of concrete or cement screed. The composition can be used in wet rooms in addition to CR 65 waterproofing. The product has a texture similar to plastic, keeps gaps from forming under the tiles, and has a high level of adhesion with the base. CM12 glue should only be used internally.
Following the release of the SS83 elasticifier, there has been a significant expansion in the composition’s operation. It works with these kinds of surfaces:
- heated screeds;
- old tile facing;
- concrete age from a month ("young concrete");
- gypsum, anhydrid screed;
- OSB stamps, drywall, chipboard.
The product is not used in freezing rooms or outside of buildings due to its limited resistance to frost, which only lasts up to -30 degrees. The viability of the solution is two hours, and the tile adjustment time when applying cm 12 is increased to 30 minutes. Additional features:
- Tile sliding – up to 0.5 mm;
- the period to grout of the seams – 48 hours;
- adhesion – 1 MPa.
The size of the plates affects the material consumption calculator as well. Roughly 4.2 kg/sq of glue is used if the value of each individual element is not greater than 30 by 30 centimeters. The amount of mixture needed to lay 60*60 cm tiles is about 6 kg/sq.
Ceresit CM 14 Extra
The "Extra" remedy works well with waterproofing and warm floor systems because it is resistant to moisture and frost and prevents tiles from sliding. Glue works well for both internal and external tasks. The composition’s strength and elasticity are increased by special fibers, and the masonry’s resistance to impact is strengthened by the reinforcing mesh. The following is the range of application for cm 14:
- all types of ceramic tiles;
- plates of artificial, natural stones;
- porcelain border;
- Cement -based materials.
The glue can be used in bathrooms and other wet areas and is designed for use with unformed bases made of cement and concrete. How much of the substance dries? There is just one day left to grout tiles. Additional features of "Ceresit SM 14":
- The viability period of the solution is 2 hours;
- temperatures during work – +5 … +30 degrees;
- adjustment time – 20 minutes;
- adhesion – 0.8 MPa;
- frost resistance – 100 cycles;
- operation temperatures –30 …+70 degrees.
The material consumption is 2.7–6 kg/kV. m; tiles less than 15 cm are indicated by the first digit, and tiles more than 45 cm by the second.
Ceresit CM16 Flex
Ceresit 16 glue has more elasticity, is reinforced with Fiber Force microfibers, and works with all kinds of tiles. Because of his resistance to deformation, he is appropriate for materials like drywall, OSB plate, fiberboard, chipboard, and gypsum fiber. When combined with waterproofing materials, the construction mixture is frost-resistant, waterproof, and appropriate for covered pools, terraces, and balconies. Moreover, it can be used to apply heated screeds over previously installed tile cladding.
The elasticity of the glue keeps riding stresses from developing during deformation. The product’s enhanced open time, which can last up to 25 minutes, allows users to change the elements’ positions during that time. The "Cerezit CM16" parameters:
- Tile sliding – up to 0.5 mm;
- the possibility of grouting seams – after 24 hours;
- adhesion – 1 MPa;
- frost resistance – 100 cycles;
- Consumption-2-4.2 kg/sq. m.
Ceresit CM 17
"Ceresite CM 17" super-elastic glue is a tool for all kinds of tiles that is reinforced with Fiber Force microfibers. This dry construction mixture has a high degree of adhesion, is highly resistant to deformation, and prevents tile sliding. CM17 glue can be used to face the exterior of furnaces, fireplaces, and hammams that do not reach temperatures higher than +80 degrees because it is resistant to moisture and frost. Features and glue’s technical specifications:
- can be used on chipboard, drywall;
- suitable for work inside and outside the room;
- Compatible with the waterproofing "Cerezit" CR 65-166, CL 51;
- Suitable for screeds with heated, pools;
- not used on marble;
- dry mixture density – 1.25 kg/cube. DM, finished solution – 1.45 kg/cube. DM;
- adjustment time – 30 minutes;
- consumption time – 2 hours;
- Tile sliding – less than 0.5 mm;
- the possibility of grouting seams – after 24 hours;
- adhesion – 1.3 MPa;
- operating temperatures –50 …+80 degrees;
- Frost resistance – 100 cycles.
There are two versions of "Ceresit cm 17" available: glue with normal and reduced dust formation.
Ceresit CM 115
Because the Ceresit CM 115 brand mosaic and marble glue is white in color, it works well with a variety of marble types, stones, light limestone, transparent mosaics, and glass plates. These materials—excreted concrete, cement plaster, etc.—are fastened to the non-formed bases. D. You can work with glue both indoors and outdoors. The following are the product’s advantages:
- frost resistance, moisture resistance;
- resistance to tile sliding (up to 0.5 mm);
- suitability for heated screeds, rooms with constant humidity, balconies, terraces, pools, tanks;
- environmental Safety;
- lack of spots, fades on marble;
- the ability to stick tiles on any deformable materials after adding an elasticifier;
- compatibility with waterproofing.
They can function at +5… +30 degrees with this glue, and the coating can function at -50… +70 degrees. 0.8 MPa makes up the composition; 25 minutes is the tile adjustment time; 2 hours is the glue viability; and 100 cycles is the frost resistance.
Ceresit CM 117
"Ceresit SM 117" glue is a specialty tool for clinker and facade stone. This construction mixture exhibits good adhesion, is elasticized, and can withstand the effects of moisture and frost. When installing heated floors, glue is used both inside and outside the rooms. Marble is the only mineral tile type that cannot be adhered to non-formed bases using CM117. Glue is most frequently used for finishing:
- balconies;
- terraces;
- covered pools;
- basements;
- parapets;
- old tile coatings;
- acrylic oil coatings;
- cell and "young" concrete.
Such glue can be used to finish deformed bases following the addition of elasticifiers. The solution is viable for two hours, and it takes fifteen minutes to adjust. There is a maximum 0.5 mm of tile sliding, 1 MPa of adhesion, and 100 cycles of frost resistance. The product can operate in temperatures between -50 and +70 degrees.
Material consumption
The ceresit line of adhesives is not significantly different in terms of average consumption. It typically ranges from 2 to 6 kg/kV. m and is based on the tile’s actual dimensions and the spatula’s tooth size. The qualifications of the person carrying out the work also have an impact on consumption. The combined method of application (on the base and on the tile) increases the material costs.
Variety | Instructions for Use |
Ceresit CM 17 | Recommended for fixing ceramic, porcelain, and natural stone tiles. Apply using a notched trowel, then press the tiles firmly into the adhesive. Ensure proper coverage and remove any excess adhesive immediately. |
Ceresit CM 11 | Ideal for fixing large format tiles and natural stone tiles. Apply the adhesive evenly on the substrate using a suitable trowel. Press the tiles firmly into place and adjust as necessary. Allow sufficient drying time before grouting. |
Ceresit’s tile adhesives provide a dependable solution for a variety of tile projects. Because of their diversity, there is an adhesive that works well for almost any application, including floors, walls, high-moisture areas, and indoor or outdoor use. Every variety is intended to offer robust adhesion, guaranteeing your tiles remain securely in situ for an extended period.
When using Ceresit tile adhesives according to the manufacturer’s instructions, it’s simple. First things first, properly mix the adhesive and prepare the surface. Achieving a professional finish requires precise tile setting and uniform application of adhesive. The best outcomes can be ensured during the drying process with patience and close attention to detail.
Ceresit adhesives can assist both professional and do-it-yourself tile installers in creating a long-lasting and visually appealing tile installation. You can handle any tiling project with confidence and ease if you select the appropriate product and adhere to the usage guidelines.
To sum up, Ceresit tile adhesives offer strength, adaptability, and simplicity of use. They are a dependable option for any tiling task because their product range caters to a wide range of needs. These adhesives guarantee results that are both aesthetically pleasing and long-lasting when applied correctly.
"A variety of options, from standard applications to more demanding environments, are available for Ceresit tile adhesives, catering to different tiling needs. Whether you are working with natural stone, porcelain, or ceramic tiles, these adhesives guarantee a strong bond and long-lasting results. This post will walk you through the various varieties of Ceresit adhesives that are available, emphasizing their unique qualities and optimal applications. We’ll also give you clear-cut, detailed instructions to help you get the most out of your tiling projects."