The specifics of working with glue-Pena Technonikol 500 Professional for polystyrene foam

Utilizing building supplies can occasionally be challenging, particularly when working with adhesives and insulation. Because it is specifically made to work with polystyrene foam, Glue-Pena Technonikol 500 Professional is a great option for both professional and do-it-yourself builders.

Because of the strong bonding properties of this adhesive, polystyrene foam is guaranteed to remain firmly in place. Convenience is just as important as strength in this situation. The user-friendly format of Glue-Pena Technonikol 500 Professional makes application simpler and saves time and effort.

When used correctly, this adhesive can significantly improve the quality of your projects. To get the best results, there are specific steps that must be followed, from prepping the surfaces to correctly applying the glue. You can guarantee the effectiveness and efficiency of your work with polystyrene foam by becoming proficient in these techniques.

Types of glue-pen

This brand uses one-component polyurethane glue as its glue. It makes it possible to mount items made of both regular foam and extruded polystyrene foam. The material’s composition is represented by a variety of targeted additives, with isocyanate oligomers playing a major part. Since they react with oxygen from the surrounding air, they can actively replace propane. The following are glue-Peni’suniquequalities:

• providing good thermal insulation;
• reliable fixation with the base;
• resistance to mold, moisture;
• Excellent wear resistance and long service life.

The adhesive and insulating properties of glue-penes are excellent. This makes it possible to use a method of securing polystyrene foam to bases such as brick, concrete, and wooden walls. It is frequently utilized in projects involving glass-deck sheets, drywall, aerated concrete, and gypsum fiber. For polystyrene foam, there are two primary forms of "techno-nicol," which are explained below. Every tool comes in 400, 750, or 1000 ml cylinders for sale.

Technonikol 500 Professional-universal glue-pen

With its strong component binding and high surface adhesion, this tool is the most widely used in the series. extensively utilized for XPS (extrusion foam polystyrene), which is also used to make thermally insulating plates. Additionally, foam can be used to seal the spaces between the slabs when installing insulation:

• roofs;
• foundation;
• basement;
• basement;
• outside the house;
• inside the house and apartment.

Glue can be used to repair plastic, tin, panels, drywall, mineral wool, and wall cracks. Cavities and voids can be filled with glue. It can also be used to glue decorative elements like lining, stucco, and skirting boards to the roof. A universal product works with plaster, chipboard, porcelain tiles, and all of the bases mentioned above.

The following are the Technonikol foam’s technical specifications:

• thermal conductivity – 0.035 W/MK;
• the deadline for grasping with the base is 10 minutes;
• final drying – 24 hours;
• The density of the finished adhesive layer is 25 g/cube. cm;
• a shade of foam after solidification – blue;
• temperature during work – from 0 to +35 degrees;
• recommended humidity when gluing plates – up to 55 %;
• Adhesis to extruded polystyrene foam – 0.13 MPa, concrete and wood – 0.15 MPa, metal – 0.07 MPa.

It’s perfect for beginners because you can move the glued slab around during the first ten minutes.

Technonikol for polystyrene foam

This adhesive is intended for use with polystyrene foams, making it ideal for installing thermal insulation. Polyurethane was added to the composition and has a 10% increase potential. You can insulate the foundation and basements and repair the polystyrene foam on buildings both inside and outside with this glue pen. He closes the joints between the plates and fills in any gaps or pits.

While the product’s technical specifications are similar, the primary setting period differs. It takes a little longer than fifteen minutes for universal glue. varies in the final layer’s color (gray). Although the manufacturer advises using Technonikol for its intended purpose, you can use it to fix other materials and polystyrene foam if necessary.

Knowing the advantages and particular application techniques of Glue-Pena Technonikol 500 Professional for polystyrene foam is necessary when using it. Excellent adhesion and insulating qualities are provided by this multipurpose adhesive foam, which is intended to bond polystyrene foam securely and effectively. By using the right methods, you can produce results that are strong and long-lasting, guaranteeing that the polystyrene foam remains firmly in place and increasing the overall efficacy of your insulation projects.

Advantages and disadvantages

In terms of qualities, specially made materials are always superior to regular tile adhesives. This rule is also followed in the case of the "Technonikol" glue tank. Using it has numerous benefits:

• Ease of use – the finished composition does not need to be diluted, it is easily squeezed out of the cylinder;
• Reducing the deadline for installation work is achieved due to convenience and quick setting;
• the presence of a small but enough time to clarify the location of the plate;
• the ability to close up joints and cracks without buying a different remedy;
• lack of “cold bridges” due to similar thermal conductivity as in the glued material;
• 100 %reliability of fastening, high quality clutch with any reason;
• Resistance to moisture, mold – do not carry out additional antifungal treatment;
• suitability for internal and external works.

In terms of drawbacks, only the cost is greater than that of inexpensive tile glue; however, "Technonikol" frequently triumphs when compared to equivalent products. Additionally, using foam in a cold environment is not feasible; you will need to wait for the warmer months.

Instructions for use

How should glue-penu be used? For the entire line of funds, the instruction is the same. To improve adhesion, prepare the surface by making sure it is completely dry, spotless, and free of trash. After wiping or washing, the base is dried. Apply glue directly with a cylinder or with a mounting gun. The second choice uses less foam and is far more convenient.

How can slabs of polystyrene foam be glued? The following is the proper work procedure:

• Put the cylinder on a flat surface with a valve up;
• Remove the cap of protection, connect the cylinder with the corresponding place in the mounting gun;
• shake the spray can;
• apply glue to the plate around the perimeter, slightly retreating from the edge (the glue strips should not be thicker than 3 cm);
• apply glue in the center of the plate with a strip from top to bottom;
• wait 5 minutes, attach the plate to the base (do not tear it off when moving from the wall);
• press the polystyrene foam, fix it in the right position, leave it until the glue is set;
• repeat the work, leaving the cracks between the tiles of 3 mm;
• After drying, apply glue-pen to fill the cracks;
• After a day, the crawled foam is cut off with a knife, the glue stains can be removed with a special cleaner of the same brand.

Glue-Peni consumption

Usually, 1000 ml of the product is sufficient for 10–12 kV m of surface, given that the previously mentioned procedure is followed. At 8–10 kV, buy a 750 ml cylinder (400 ml per 4 sq. m). Large packaging typically costs less; 400 ml will run you 200–250 rubles, and 750–1000 ml will cost you roughly 300–350 rubles.

When you follow the proper procedures, using TechnoNIKOL 500 Professional Glue-Foam for polystyrene foam is simple. This adhesive is a great option for insulation projects because it is specifically designed to give polystyrene foam a strong bond.

Make sure the surfaces to be bonded are dust-, dirt-, and grease-free before starting. To get the best results, the surface must be properly prepared. Before using, give the canister a good shake to thoroughly mix the contents, then apply the foam precisely with a foam gun.

Apply the glue-foam in beads or zigzags, depending on how big you want the surface to be. The pieces of polystyrene foam should be firmly pressed together and held in place for a short while. Because the adhesive expands slightly when it cures, a small amount works well. Ensure that you adhere to the drying and curing time recommendations provided by the manufacturer.

Another crucial factor when utilizing TechnoNIKOL 500 is safety. In order to avoid coming into contact with the adhesive, work in an area with good ventilation and wear safety gloves and goggles. If any foam gets on your skin, wash it off right away with soapy water or an appropriate solvent.

You can guarantee a strong and long-lasting bond for your polystyrene foam insulation projects by adhering to these guidelines. TechnoNIKOL 500 Professional Glue-Foam is a dependable option that makes installation easier and produces top-notch outcomes.

Video on the topic

What can be glued to the glue-Peny Technonikol Professional for polystyrene foam?

Installation of stone wool slabs using glue-peni technonic 500 Professional

Glue Penen Technonikol 500 Professional Universal