Technical characteristics and consumption of anti-corrosion mastic vector-1025

A key component in preventing rust and deterioration on metal surfaces is anti-corrosion mastic. The Vector-1025 stands out among the many options available because of its exceptional dependability and performance. This premium mastic is a necessary part of many industries, including the construction, automotive, and marine sectors, because it is made to prolong the life of metal structures.

Because of its exceptional adherence qualities, Vector-1025 is renowned for providing a strong and long-lasting bond to metal surfaces. Because of this feature, it works especially well in harsh settings where metals are subjected to chemicals, moisture, and mechanical wear. The strength and integrity of the structure are preserved because the mastic forms a barrier that stops corrosive substances from piercing the metal.

The simplicity of use of Vector-1025 is another important aspect. Depending on the needs of the project, the mastic can be applied with a brush, roller, or spray, offering flexibility. Because of its quick-drying formula, projects can be completed more quickly without sacrificing the coating’s protective properties.

It’s crucial to remember that the thickness of the application affects coverage when evaluating Vector-1025’s consumption rate. A single liter of mastic usually covers a given area quite well, but for maximum protection, it’s best to adhere to the manufacturer’s instructions. The performance and longevity of the mastic can be maximized with careful surface preparation and consistent application.

To sum up, Vector-1025 anti-corrosion mastic provides a dependable way to shield metal surfaces from rust. Professionals looking for long-lasting protection for their metal structures choose it because of its strong adhesion, ease of application, and effective coverage. With its demonstrated efficacy and longevity, Vector-1025 offers peace of mind for use in industrial, marine, or automotive settings.

Description

The exterior metal surfaces are coated with Mastic Vector 1025 to provide an anti-corrosion layer that lengthens the construction’s lifespan. Additionally, the product can be applied as a primer layer before painting additional enamel type PF surfaces.

The two components of the composition are polymer substances. To initiate the polymerization process, two ingredients must be thoroughly combined prior to usage. The remedy is reddish-brown in color.

It is applied to the exterior metal surfaces to create an anti-corrosion layer that lengthens the structure’s lifespan.

A strong protective coating called anti-corrosion mastic Vector-1025 is intended to stop rust and corrosion on a variety of metal surfaces. It has outstanding durability, adhesion, and resistance to challenging environmental factors. This mastic is simple to use and offers durable protection with little upkeep. For both industrial and do-it-yourself projects, it is essential to comprehend technical features like drying time and temperature tolerance and precisely calculate its consumption per square meter in order to achieve the best possible outcomes at the lowest possible cost.

Advantages and disadvantages

Because of its positive attributes, mastic is in high demand for specific kinds of work. Studying the properties and application nuances in detail is necessary before deciding whether or not to use this composition. Thus, vector 1025 stands out among the benefits of utilizing a mastic solution for the reasons listed below:

• Low level of volatile organic compounds;
• Qualitative properties of surface protection from the formation of rust and other negative factors;
• You can apply the coating with different methods, tools;
• The preparation of the base is simple, you do not have to carefully clean the surfaces before applying a mastic layer;
• The durability of the structure increases, the layer serves up to 25 years;
• There are no strong restrictions on the temperature of the layer, you can work with indicators from -10 to +80 degrees;
• Can be applied as soil under many types of paintwork;
• Can be used in storage rooms for metal structures;
• It is possible to accelerate the process of drying, you need to use an accelerator of polymerization of mastic.

The composition’s drawback can be categorized as a two-component type; beginners may encounter some challenges in preparing the solution for work. along with the necessity of adhering to safety regulations while at work.

Technical properties Vector 1025

Examine the coating’s functionality in light of its technical attributes, as stated by the manufacturer. Mastic 1025 is produced in compliance with TU regulations. If you ask the seller for a certificate of product conformance before buying a high-quality composition, you can be certain that the original method is being suggested.

The following stand out as unique technical features of this mastic composition:

• A tool is supplied in the form of two containers with a measured amount in advance for the correct mixture of the finished solution;
• The viscosity level after both components are connected, the measured BI-4-50-55 seconds;
• The level of dry residue is not less than 75%;
• The viability of the product is not less than 1 day;
• The layer drying mode is a natural air drying;
• Drying of one layer before applying a new one without using an accelerator from 6 to 24 hours;
• The time of drying the coating between the application of layers using an accelerator for mastics from 2 to 4 hours;
• The thick composition can be diluted with solvent or xylol;
• The viscosity of the mastic, if the diluent was added in the amount of 10% of the total volume, when measuring the ZA-4 device is 25-30 seconds;
• A way of applying finished mastic – with manual tools with a roller or brushes. Pneumatic method – nozzle size 0.8-1.00 mm Pressure setting on 6-8 atmospheres, with airless spraying with a nozzle 0.019-0.0023 mm with a pressure of 5-7 MPa;
• Can withstand the temperature exposure from -35 to +175 degrees;
• It turns out durable coating on metal, which will serve up to 25 years.

To ensure proper mixing of the final solution, a product is supplied in the form of two containers with a measured amount beforehand.

Decorative and physicochemical properties of coating

The decorative and physico-chemical properties of the coating are essential to describing a mastic product and have a significant impact on the product selection. Thus, the properties of mastic vector 1025 are described as follows:

• By color, the layer is red-brown;
• The heat resistance of the coating is up to +150 degrees;
• The degree of adhesion according to the method of lattice incisions in points is 1;
• The strength level of the formed film after a layer dries during a mechanical blow is 50 cm;
• The degree of elasticity of the resulting coating during bending is 1 mm.

Field of application of mastic vector 1025

Superior mastic is characterized by a broad range of applications; to achieve the intended outcome, it is crucial to understand the purpose of any composition prior to purchase. Regarding the use spheres below’s vector 1025:

• The creation of a protective film from rust for heating networks of any type of gasket, as well as the structural parts accompanying them;
• Creating metal protection from coating atmospheric rust in the form of a primer layer, with further painting the surface with enamels of the type of PF;
• Obtaining protection of metal bases of hydraulic structures;
• Obtaining a protective coating from atmospheric and water rust on river vessels;
• Barrier coating of hot water batteries;
• Protective coating for heating networks of pipelines;
• Barrier coating of the gas pipeline on the facades;
• Preparatory treatment of pipes for further insulation;
• Preparatory processing of any bases for staining with paint and varnishes of many types;
• Obtaining an anti -corrosion layer.

What is the cost of mastic vector 1025

The number of layers affects how much mastic is consumed on average. According to the package, the indicator calls for 130–150 grams of material per square meter of base for a single-layer coating. The consumption for the subsequent layers is lowered to 120 grams per square meter of surface area if you apply more than one layer.

You must know the surface area multiplied by the flow rate and the number of layers in order to determine the necessary amount.

The consumption for the subsequent layers is lowered to 120 grams per square meter of surface area if you apply more than one layer.

Recommended thicknesses

It’s critical to adhere to layer thickness norms for the coating to provide the required protection. When applying LKM over brown mastic as a primer, the maximum thickness for a two-layer coating should be 0.08–0.1 mm.

The standard for application thickness when using the vector 1214 by covering is between 0.05 and 0.075 mm. Generally speaking, the total coating thickness shouldn’t be greater than 0.13 mm.

Metal structures of various kinds can be effectively protected against corrosion formation with Vector 1025 Mastic. The composition has a wide range of applications, and the protective layer has been around for a while. The product is easy to use; if you adhere to the guidelines, you should be able to handle the application on your own.

The anti-corrosion mastic Vector-1025 provides a complete solution to prevent corrosion on metal surfaces. Due to its technical qualities, which include strong adhesion and resistance to chemicals and moisture, it can be used in a variety of industrial settings.

The low consumption rate of Vector-1025, which translates to cost-effectiveness without sacrificing performance, is one of its unique features. This makes it a desirable option for businesses trying to prevent corrosion damage to their structures and equipment.

You can maximize the application of Vector-1025 to achieve long-lasting protection by being aware of the particular requirements of your project and the environmental conditions it will encounter. Applying and prepping surfaces correctly is essential to getting the most out of this anti-corrosion mastic.

To sum up, Vector-1025 anti-corrosion mastic is a dependable and effective way to fight corrosion in a variety of industrial environments. Its technical qualities, when combined with appropriate application techniques, make it an invaluable tool for maintaining the durability and integrity of metal equipment and structures.

Video on the topic

Anti -corrosion bitumen mastic test. Part 2

"Liquid" anti -corrosion composition!How quickly oil anticos are washed off?

Application of anti -corrosion mastion of bastion

How I established with bitumen-bird mastic.(errors in application)

Bitumen mastic, good or evil? Anticorosyic processing of the car.

Mastic Bitumen roofing. Universal application.

Working with bitumen mastic Medn24 Technonikol

How to spoil the body with anticorus?