Speeding the surface before painting: TOP-5 of the best products than you can remove fat from plastic, metal, wood, glass and skin

For a perfect paint finish, proper surface preparation is essential. Cleaning the surface of oil and other impurities is one of the most crucial phases in this procedure. Better paint adhesion and a smoother, longer-lasting finish are ensured when starting with a clean, grease-free surface, regardless of whether you’re working with plastic, metal, wood, glass, or skin.

To effectively remove grease without causing damage to the surface, different cleaning products are needed for each type of material. Picking the incorrect cleaner can cause bubbles, peeling, or poor paint adherence. The top five products for removing grease from different surfaces will be discussed in this article. Whatever the material you’re using, following these tips will enable you to paint a space of professionally-quality finish.

We’ll talk about multipurpose cleaners that can be used on a variety of surfaces as well as specialty items for more delicate ones. Whether you’re a professional painter or a do-it-yourself enthusiast, you’ll have options thanks to our list of both commercial and household products. You’ll know exactly which products to use for a clean, paint-ready surface by the time you finish reading this guide.

Why degrease the surface before painting

Before applying paint, varnish, glue, or any other mixture to the metal or any other material, the degreasing process entails removing any fat deposits from the surface.

At first, they can be contained in oils, polishing coatings, and other liquids. Hydrons, bitumen, mastic, hand prints, and sweat droplets can also be examples of this.

The following happens as a result of their falling onto the metal:

• The surface is worse covered with varnishes and paints;
• The material lugs worse with the coating;
• The film forms slower.

Deafer

There are three different levels of pollution in total: weak, medium, and strong. Everything is dependent on the quantity of fat remnants present in a square meter.

The following are the causes of degreasing:

• Improve adhesion;
• Contribute to uniform distribution of material;
• Eliminate possible violations of the integrity of the protective film;
• Improve the protective qualities of varnish and paint;
• Avoid the fact that the applied composition is swollen;
• Simplify the method of applying paint;
• Avoid cracking and abbreviations of coloring composition.

Deafer

The harm of fat pollution

There is a chance that fat pollution will stain the metal because:

• It is difficult to apply the coating due to fat remnants;
• There is a problem with uniform staining of the surface;
• It is difficult to apply paint to metal without danger of a violation of the coating;
• The service life will decrease and the quality will decrease.

Three methods of metal cleaning

The metal surface can be cleaned in three different ways, which involve the following steps.

Mechanical

This technique involves scraping off the layer of dirt to clean the work surface.

• Such activities can be done manually or using electrical appliances.
• As a result of the removal of the fat layer, the integrity of the metal is disturbed, scratches and some roughness appear.
• All this helps to improve adhesion with a coloring composition.

The machine is grinding

It cannot be claimed, though, that the mechanical approach offers complete purification from all extraneous elements. It is best to use this technique in conjunction with the other two.

Chemical method

This approach is the most economical because it uses specialized chemicals, each of which has a minimal cost.

• Moreover, the least amount of time to wipe the surface is spent with special means.
• They include special elements designed for speedy splitting of fats.

Is regarded as the most well-liked and frequently utilized.

solvent646

Electrochemical method

Here, they combine the use of chemical components with specialized machinery.

• The action of electric charges is enhanced by interaction with special reagents.
• The method itself is expensive and it is possible to use it only on an industrial scale.

How to degrease the surface

The mechanical removal of fat deposits can be assisted by a specialized solvent and a specialized soft cloth. They are appropriate for use in cramped spaces.

White Spirit

A lot of gas stations and auto owners now use this kind of tool. The product’s composition is made entirely of organic materials. is the most widely used product, and it has the benefit of being reasonably priced. The strong odor is the only negative aspect.

White Spirit

Acetone and gasoline

You can always use homemade fat-dies, which are found in practically every home, if you don’t have any professional tools at home and you can’t get them quickly enough to begin working right away.

For instance, kerosene, gasoline, and acetone are effective at combating oily pollution. They obviously differ in terms of functionality and destinations.

acetone

More so than the two solvents mentioned above, gasoline is thought to aid in the fight against fats. Its main distinction is that it disappears.

Acetone use at home is strongly discouraged. It can be highly aggressive and frequently leaves behind difficult-to-get rid of traces. He also has an extremely complex structure.

Ayeton

Antilicon

You may use anti-mosilicon to clean the car’s exterior before painting it. Additionally, it is a good idea to process with his assistance before priming and puttying.

It is available in particular packaging. Among its benefits are the following:

Antilicon

1. It retains beneficial properties for a long period of time.
2. He is economical. That is, for high-quality processing of any surface, a small amount of composition is required.
3. With it, you can overcome even the oldest, stained spots.

The drawbacks include a strong, disagreeable odor that requires you to work wearing protective goggles, rubber gloves, a respirator, and a protective suit.

Alkalis

Alkalis are used when working with metal because they easily break down the fatty residues left by acids. Their direct interaction with oil is not good.

Grease and grime must be removed from surfaces before painting in order to achieve a smooth, durable finish. The best five products for degreasing plastic, metal, wood, glass, and even skin are examined in this article. From commonplace items like baking soda and vinegar to specialist cleansers, we’ll walk you through the best choices to get a spotless, paint-ready surface.

How to degrease plastic

Plastic has a structure that makes it difficult for it to stick to other materials, so pre-processing is necessary before applying the coloring composition. But not every degrease fits him well.

Deafer

It is vital to check its reaction by moistening a small piece of surface in the chosen solution in order to understand how it will react to a specific chemical.

It is established that the plastic will take up liquids like:

• White Spirit;
• Alcohol fluid;
• Antistatist in the form of a spray.

White Spirit

You can dilute the chosen tool with a small amount of water if you are concerned that it will have a significant impact on plastic. The aforementioned methods can be used to degrease household plastic. However, it is appropriate to use softer liquids—like anti-mosilicon, for instance—when cleaning cars.

Avoid rubbing abrasive products into the surface when using them. Be calm and remember to wear gloves.

Construction gloves

Product	Suitable Surfaces
Isopropyl Alcohol	Plastic, Metal, Glass
White Vinegar	Wood, Glass
Acetone	Metal, Glass
Dish Soap	Plastic, Metal, Wood, Skin
Baking Soda Paste	Wood, Skin

To sum up, a perfect finish depends on thoroughly prepping surfaces before painting. Whether you’re working with plastic, metal, wood, glass, or even skin, degreasing is an essential first step. Every material has unique requirements and best practices, and choosing the appropriate products can have a big impact.

Isopropyl alcohol is a practical and readily available solution for plastic. Grease is eliminated without causing harm to the material. Acetone’s potent grease-cutting qualities make it a great choice for metal surfaces as they guarantee a clean, paint-ready surface.

Mineral spirits work well in this situation because wood can be more fragile. They clean away grease and oils without damaging the grain or raising it. A vinegar and water mixture works well as a safe degreaser for glass surfaces, leaving the surface streak-free and spotless.

Using a gentle approach is important when it comes to skin. An excellent substitute is baby oil, which removes grease and paint efficiently and doesn’t irritate skin. Every one of these products guarantees that your painting project gets off to a good start by providing a dependable solution suited to particular materials.

Selecting an appropriate degreaser is the initial stage towards a triumphant painting project. You can easily achieve professional results if you are aware of the particular requirements that each surface has. You’ll have no trouble finishing your project beautifully if you keep these best products in mind.

Video on the topic

The simplest advice on how to wash the "launched" kitchen from fat and plaque in a couple of minutes

Water-alcohol degreas. Why is it needed? Simple and visual removal test.

How to degrease plastic before painting at home

How to wash the metal from oil?

We found the best remedy against rust!