Simple and inexpensive ways to make a home -made mosquito net for windows

Summertime means nice weather, entertaining outside, and, regrettably, annoying mosquitoes. Open windows allow these microscopic trespassers to enter your house, upsetting your tranquility and leaving you with itchy bites. To keep these insects at bay, a mosquito net is a practical solution, but commercially available models can be pricey and frequently don’t fit all window sizes.

Thankfully, creating your own mosquito net is an easy and affordable substitute. A simple mosquito net that fits your home perfectly can be made with a few simple materials and a little imagination to provide effective home protection. By doing it yourself, you can customize the net to fit your exact window measurements and style preferences while also saving money.

We’ll walk you through a few simple steps in this post to make a DIY mosquito net for your windows. Regardless of the size of your kitchen window or bay window, you’ll find helpful advice and easy-to-follow directions to meet your needs. By the time it’s all through, you’ll have a stylish and useful mosquito net that improves the comfort of your house while keeping those annoying insects outside, where they belong.

Method Description
Using a mesh fabric Buy a fine mesh fabric, cut it to the size of your window, and attach it with velcro strips or adhesive tape.
Using a magnetic strip Attach magnetic strips to the edges of the window frame and the mesh fabric for easy installation and removal.
Using a wooden frame Create a simple wooden frame, staple the mesh fabric to it, and fit it into the window opening.

Which is better – homemade or purchased mesh

Acquiring an anti-mosquito grid for every window in the house is an expensive indulgence. Since a single product typically costs between 1,500 and 2000 rubles, many people are compelled to forgo windows with pre-made designs in order to save money. The quality of the home-made mesh will not be inferior to that of the factory if you prepare the material well and handle every task meticulously. She will carry out all of her "relative’s" duties, including protecting against even the tiniest insects, gathering large trash, and removing some of the dust from the street.

To be content ↑

The choice of mesh material

In order to prevent complaints during service, a home-made mesh’s manufacturing material must adhere to certain requirements:

  • Do not interfere with normal air circulation;
  • do not create obstacles to the penetration of sunlight;
  • be environmentally friendly, durable;
  • Do not deteriorate from ultraviolet radiation, wind, precipitation, temperature change;
  • be easy to care for and quite aesthetic.

In certain situations, the material’s list of specifications might be expanded to include the need for extra durability in order to withstand animal claws. To avoid changing the canvas too frequently, it should last for at least a few years.


Ordinary medical gauze is the least expensive and most environmentally friendly material used to make mosquito nets. The benefits of this exquisitely woven cotton thread fabric stop here, though it costs literally pennies. The gauze is easily broken by a small amount of mechanical force, is highly contaminated, stretched, and weak. It breaks down entirely when exposed to temperature fluctuations, precipitation, and bacterial reproduction. Consequently, gauze should only be used as a temporary insect deterrent in areas like gazebos and summer houses.

Old tulle curtains

The curtains are much more useful than Marley because they are composed of sturdy synthetic material that won’t break. A mosquito net can be cleaned with any detergent if needed. However, tulle is frequently fairly dense, which means that it blocks out light and may result in the room being overly shaded. Furthermore, it can easily turn yellow in the sun, which has an unappealing appearance.


This shallow material combines low weight, good flexibility, and resistance to unfavorable external influences. Fiberglass is advised in cases where the antimoscate structure needs to be strengthened. Fiberglass can be fixed on windows made of plastic or wood. It is robust, dependable, and performs exceptionally well.


Even with agrothestle, an improvised tool that every summer resident has, you can construct a mosquito grid by hand. All that matters is selecting a white fabric with a minimum density of about 17 microns and not too thick. A denser material will block out more sunlight. Agrotkan completely keeps out midges and mosquitoes, preventing them from penetrating windows to release dust and poplar fluff. She serves multiple seasons and passes the air flawlessly.

Fiberglass or polyester

Fiberglass (Fayberglass) – the best choice for arranging mosquito nets on the windows. The only drawback of the material is the highest price of all the proposed options. Otherwise, it is a light fiber canvas with PVC coating is perfect – it is durable, does not burn, transparent, withstands the effect of all atmospheric factors. On sale there is material with cells of different sizes (0.5-1.2 mm). There are also nets from the Fiberglass of Antipil class with 0.25 mm cells, which even catch the smallest particles, but require regular washing. Less high -quality, but inexpensive is polyester. The nets from it are strong, durable, but denser.

To be content ↑

Building a DIY mosquito net for your windows can be a simple and affordable project. Adhesive strips, mesh fabric, and a little perseverance are all you need to successfully keep those bothersome insects out. In addition to being cost-effective, this do-it-yourself solution fits any size window with customization options. To enjoy a mosquito-free home without breaking the bank, follow these simple steps.

Installation of a frameless grid

Both frame and frameless (frameless) ready nets are available. You should go with the easiest options if it is decided to install an anti-cosquitual structure without a frame base. For instance, rolled or rolling roller grids are extremely difficult to produce and cannot be produced by hand with a satisfactory level of aesthetics. It is preferable to outfit the window block with a mosquito net mounted on low-cost hardware that even a novice master can access.

Fixing an old sealing elastic band

Any material, like agrothel, can be used to create such a grid. They buy the required length of canvas in advance and cut a section or the whole thing to fit the window. Following this action:

  • take out the old seal from the window;
  • They wash the elastic band from dirt with soap, let it dry;
  • Rinse the site of the window where the seal stood;
  • Temporarily attach the mesh canvas on the window using cotton sticks;
  • put back the seal, firmly pressing the fabric to them (for this purpose you can use any convenient devices), begin to act from the corners;
  • If part of the elastic is superfluous (this happens), then it is simply cut off.

The cord instead of the seal

If the farm has extra linen cord lying around, it can also be used to fasten a grid, which puts obstacles in the way of dust and insects. This kind of rope will mend the anti-mosquito canvas and replace the already-failed seal. To begin work, gather the following supplies: a screwdriver, PVA glue, a sharp knife, a polymer grid or other material, a roulette or ruler, and a rope with a diameter of approximately 4 mm. The fat will just not fit into the window groove, and a thinner cord will fall out of it.

The steps involved in installing a mosquito net are as follows:

  • open the window sash, find the area on which the edges of the sealing cord are combined;
  • Carefully take out the cord from the groove (if the seal remains in working condition, it is washed, dried and cleaned for storage until the cold season);
  • They wipe the window groove, because dirt and dust always accumulate there;
  • Wipe the site dry with a cloth;
  • measure the opening, cut off the cord of the corresponding length, adding about 10% for the reserve;
  • Cut the net so that it protrudes outside the window for 1 cm on each side;
  • With the help of a screwdriver or other tool, they pushed into the groove of the linen cord, pressing the mesh with it, while starting work from the upper part of the profile (pressed to the entire depth, reliably fixing the mesh);
  • make sure that the grid is fixed in the tightness, without sagging;
  • The ends of the cord in the center of the lower part of the window are joined, the excess is cut off;
  • glue the ends with a small amount of PVA glue.

Because the grid will be measured in accordance with the window’s dimensions, it can be easily taken down and put back in place if needed. Since the product won’t require an additional space, you can store it folded throughout the winter.

Fixation on Velcro-consuming

Burdock tape fasteners and any necessary materials for the base itself are purchased in order to secure the mosquito net in this manner. The only material that is unfit for this use is metal mesh, as its sharp edges have the potential to shatter the fastener when it is cut. A high-quality Velcro is essential; otherwise, it will break easily.

Prior to cutting the main material, all measurements are taken and small margins are left on all sides. All around the profile, the surface is severely deteriorated. The latter is typically made using a self-adhesive method. You will need to use the appropriate glue if the tape is not fully adhered to the surface.

There are two parts to velcro. The hard portion of the future mosquito net is adhered to the window profile all the way around. They wait until the glue has completely dried if it was used for a task. The second piece of tape is applied on top of the grid once it has been applied to the burdock, and it instantly adheres to the base. You can use tape on magnets in place of burdock Velcro, which is even more practical.

An easy and affordable way to keep annoying insects out of your house is to make a homemade mosquito net for your windows. You can create an effective barrier against mosquitoes and other insects for a relatively small amount of money by using easily accessible materials like mesh fabric, adhesive strips, and simple tools.

Measuring your windows, cutting the mesh to fit, and firmly attaching it are the steps in the process. The instructions are simple to follow and can be finished quickly, regardless of whether you decide to use Velcro, magnetic strips, or a straightforward frame constructed of lightweight plastic or wood. Not only does this do-it-yourself project save you money, but it also lets you tailor the net to precisely fit your windows.

In addition to being useful, creating your own mosquito net gives you a sense of achievement. Anyone can do this easy project, regardless of their level of crafting expertise. In addition, it provides the option to quickly replace or fix broken net components, guaranteeing durable protection.

You don’t need to buy pricey commercial solutions to enjoy a bug-free home environment if you follow these easy steps. This method is not only affordable, but it also lets you customize the netting to meet your unique requirements, guaranteeing that your house stays a cozy and bug-free haven.

Video on the topic

DIY mosquito grid without frame 10 minutes and ready+zero rubles for installation.Firmly, cheap!

The most budgetary and working anti -mosquito mesh with your own hands!!!

I don"t buy mosquito nets anymore, I do it myself. 100% quality analogue for a penny

"There are no mosquitoes!"Video Instructions for the assembly of a mosquito net

I don"t buy mosquito nets anymore! I do it myself, and do not spoil the window! Great idea with your own hands!

"There is no dust!"Video Instructions for finalizing a mosquito net! We reduce the amount of sand from the street by several times.

The fastest installation method for the frame mosquito mesh 2-3 minutes

What color, in your opinion, is able to make a person happier?
Share to friends
Daniel Sedov

Master finish with 20 years of experience. I know everything about painting walls, ceilings, facades. I will gladly help you make your home beautiful and cozy.NoEDIT]

Rate author
Add a comment