Putting walls for painting: Instructions, how to put the walls with your own hands without experience (tips of professionals + photo)

Painting your walls can completely change the appearance and feel of your house, giving each room a bright, new vibe. To guarantee a smooth and durable finish, you must properly prepare your walls before you begin painting. Don’t worry if you’ve never done this before. Even if you have no prior experience, you can still achieve great results with the right guidance and professional advice.

Cleaning, patching, sanding, and priming are important steps in preparing walls for painting. These actions are essential for smoothing out flaws and establishing a sturdy surface on which the paint will stick. Ignoring any one of these steps can result in paint that dries too quickly and uneven surfaces.

We’ll take you step-by-step through the process of painting your walls in this article. Everything you need to know will be covered, including the supplies and equipment you’ll need as well as the tricks and advice used by experts to achieve a faultless finish. You’ll be able to approach your painting project with confidence and produce results that look professional if you follow these instructions.

The secret to a successful painting project is thorough wall preparation, regardless of whether you’re painting a single room or your entire house. So let’s get started and even if you’re a total novice, learn how to prepare your walls for painting like a pro.

Why do you need putty walls for painting

Prior to painting, applying wall putty is crucial because it enables you to smooth out the surface. But not everyone follows this guideline, and some attempt to paint the plaster in an attempt to save time and money.

Acrylic putty

Consequently, low-quality work is produced, which typically needs to be redone.

  • And all because the plaster cannot provide a perfectly smooth surface, when stained, especially with colored or black paint, they become visible even more.
  • It is not necessary to hope that the thick layer of paint will hide irregularity, in fact, staining them will only emphasize.
  • It is for this reason that putty is an important stage in the preparation of the surface for staining.

putty for painting

The only exclusion is that if textured paint is used, the putty step can be skipped. She essentially acts as putty, so her flaws won’t be as noticeable.

Selection of materials

Which material is used in the repair will determine its quality and longevity. This is why choosing the right putty to purchase in advance is essential.

For this, it’s critical to consider the following crucial information:

  • The purpose of the room is if the putty is operated in the room with high humidity and vice versa, this must be taken into account when selecting the material;
  • Price – the cost of the material is especially important in the conditions of a small budget. At the same time, it is worth considering the equality of price and quality, and not give preference to the cheapest material;
  • The surface of the walls – on which surface you need to put a layer of putty, other nuances, for example, the price and even the amount of material depends. For a new building, putty will need less than for an apartment on secondary housing.

putty water acrylic

Types of putty

There are numerous manufacturers in the current market offering a wide range of finishing materials, including putty. Let’s identify the different kinds of cement and starting putty.

Starting

Before applying the finish, the starting putty is applied in layers. gives solid traction between "finish" and cement.

  • Cement – a high level of moisture resistance (suitable for the bathroom, kitchen, dignity. node, etc. P). The only negative is a high shrink coefficient;
  • Gypsum – shrinkage coefficient is much lower, but less adapted to moisture. More elastic material, so working with it is easier than with a cement composition.

Sand concrete

Finish

Beyond the initial putty, there are additional varieties. Take into consideration sequentially:

  • Cement – the same characteristics as that and starting. It has a significant shrinkage, but is recommended for moist premises;
  • Gypsum – suitable for dry rooms, has a smaller shrinkage;
  • Polymer – quite waterproof, as it forms the so -called film on the surface. At the same time, it reduces vapor permeability, which means that for residential premises is not a very good option;

The finish putty

Water dispersion is becoming more and more popular among builders because of its low cost.

Tools

Even though I figured out the materials, it’s still insufficient. Prior to beginning work, gather the required set of tools, which are as follows:

  • Spatulas (narrow and wide);
  • A capacity for kneading the composition (a clean bucket is suitable);
  • Drill with a mixer for kneading.

Construction metal spatula

This will be more than sufficient for a novice.

Preparation of walls

One of the crucial phases that determines how well new material adheres to the wall. The putty will exfoliate and peel off if there is pollution or leftover wallpaper on the surface.

It is advisable to give the purification phase more time. The walls’ old coating needs to be removed, and everything needs to be redone, even if it is only going to be minor cosmetic work.

Strengers

The following is the order in which preparation is completed:

  1. Cleansing the walls of the old coating, the remains of wallpaper, pollution;
  2. Next, the walls need to be washed with clean warm water;
  3. All cracks on the wall, if available, first smear with putty;
  4. Treat the walls with a primer, it is better 2-3 times;
  5. As soon as everything dries, you can consider the surface ready for fresh coating.

putty

Observing breaks in between the stages is crucial. This will facilitate the evaporation of moisture, and the primer will effectively prepare the walls. It is impossible to skip any of the wall preparation steps.

The first layer

Divide the workspace before you begin working with putty. After spreading the oilcloth and setting up all the equipment, start the setup and operation.

  1. First you need to pour a dry mixture into a container, pour water (see. instructions for the material);
  2. A construction drill with a mixer nozzle must be stirred until lumps and thickening disappears;
  3. Leave the composition in this form for 10-15 minutes for shrinkage;
  4. Next, you need to dial a little material to a narrow spatula, transfer to a wide and start putty.

putty for painting

As a result, you can use multiple layers. For improved finish coating adhesion, the walls must be gripped after they have completely dried.

Finish coating

The tools, which include a bucket and a drill, need to be cleaned before working with the finish. Materials with different densities and purposes cannot be connected. The finishing line putty goes through the same stages as the initial coating.

vinyl wallpapers

There are just a handful of variations:

  • Layers of the finish should be smaller, about 1 cm;
  • The final layer should be perfectly even;
  • The processing of the finish layer is carried out with a mesh with less stiffness, so as not to damage the coating.

Construction gloves

Step Description
1 Clean the walls thoroughly, removing any dust or debris.
2 Fill any holes or cracks with spackling compound, then sand smooth.
3 Apply a coat of primer to the walls to ensure better paint adhesion.
4 Use painter"s tape to mask off any areas you don"t want to paint.
5 Start painting with a roller, using a "W" pattern to ensure even coverage.
6 Work in small sections, overlapping each stroke slightly.
7 Let the first coat dry completely before applying a second coat, if necessary.
8 Remove the painter"s tape carefully before the paint dries completely.
9 Step back and admire your freshly painted walls!

Painting walls can seem like a difficult undertaking, particularly if you’ve never done it before. However, it is totally feasible to accomplish professional-looking results on your own with the correct equipment and a little perseverance. Your walls can be completely transformed and made ready for painting by paying close attention to detail and following step-by-step instructions.

First, assemble all the supplies, which include primer, sandpaper, putty, and a putty knife. It is essential to prepare the wall surface properly. To get rid of any loose paint, dust, and debris, give the walls a thorough cleaning. Using the putty knife, smooth out the surface after packing putty into any cracks and holes. To achieve a smooth finish, let the putty dry completely before sanding it down.

Use a primer coat after sanding to guarantee that the paint sticks to the wall properly. Although frequently missed, this step is crucial for a consistent and long-lasting paint job. Your walls are prepared for painting once the primer has dried. Don’t rush the process; instead, take your time at each step. Better results come from better preparation.

Getting professional advice can help you become a much better technician. Easy suggestions like applying the proper kind of putty, working in small sections, and keeping a steady hand can have a big impact. Recall that practice makes perfect, so don’t give up if your initial effort isn’t perfect. You will gain confidence and better skills with each project.

You can putty your walls and get ready for a new coat of paint by following these guidelines and consulting professionals. In addition to saving you money, this do-it-yourself project gives you a sense of accomplishment. Take pleasure in the process and your exquisitely painted and ready walls.

Painting walls can seem like a difficult task, especially for people who have never done it before, but it is completely doable with the correct direction and a few professional pointers. From assembling the required supplies to using the putty and attaining a smooth finish, this article offers a step-by-step tutorial to help you putty your walls like a pro. You’ll find step-by-step instructions, professional guidance, and helpful photos to make sure your walls are ready for a faultless paint job.

Video on the topic

1 layer of putty. A quick way!

Secret method how to put all the walls without experience without experience

Putty without grinding ! how to put the walls, finish putty, putting the ceiling correctly.

What color, in your opinion, is able to make a person happier?
Share to friends
Daria Yakovlev

Interior designer, author of online color design courses. I will help you create a harmonious interior using color.

Rate author
Design-Estet.com
Add a comment