Properties and rules for applying OSCAR glue for glass wallpaper

Selecting the right adhesives and materials for home renovations is essential to getting a polished, long-lasting finish. Glass wallpaper is a common choice for wall coverings because of its easy maintenance, fashionable appearance, and longevity. However, choosing the correct glue is crucial to guarantee that your glass wallpaper adheres correctly and stays in place. Glass wallpaper adhesive from OSCAR is designed especially to fulfill the demands of this particular kind of wall covering.

The superior adherence qualities of OSCAR glue make it stand out and are essential for guaranteeing that glass wallpaper stays firmly affixed to the wall. Its formula is made to pierce the wallpaper’s fibrous structure and form a solid bond that stops peeling and bubbling. Additionally, this glue is simple to work with, providing a mess-free and error-free application process.

The capacity of OSCAR glue to dry clear is another essential feature. This is especially crucial when working with transparent or semi-transparent glass wallpapers. This guarantees that obvious adhesive marks won’t detract from the wallpaper’s aesthetic appeal. Furthermore, OSCAR glue is designed to withstand moisture, which means it can be used in places with higher humidity levels, like kitchens and bathrooms.

A few simple steps are involved in correctly applying OSCAR glue, and they can have a big impact on the outcome. It is crucial to thoroughly clean and prime the wall surface to make sure it is smooth and clear of dust or debris. Applying the glue evenly requires adhering to the manufacturer’s instructions regarding both the quantity and spreading pattern. To get a perfect finish, any air bubbles in the wallpaper should be quickly smoothed out after placement.

Applying glass wallpaper with OSCAR glue not only makes your wall coverings look better and last longer, but it also makes the process easier. Knowing the characteristics and usage guidelines of OSCAR glue will help you, whether you’re a professional decorator or a do-it-yourself enthusiast, accomplish exceptional results on your next renovation project.

Advantages of glue

The Oscar-water-dispersed acrylic adhesive composition was created in Russia in compliance with European standards, especially for glass wallpaper decoration and wall pasting with glass chloride before additional painting.

Convenience in the workplace is glue’s primary benefit. The decorated surface receives the application of the liquid composition instead of the canvas. Oscar is elastic, so it’s easy to adjust even the glued canvas. Additional benefits of glue:

  1. Obviously after drying. The dried wallpaper adhesive composition becomes transparent.
  2. Quick preparation. Oscar is diluted with cold water, swells in 10 minutes and does not form lumps.
  3. Universality. Maular glass chloride, fiberglass, non -woven and paper wallpaper are glued with a diluted mixture. Oscar is applied to concrete, brickwork, other bases.
  4. The antiseptic in the composition prevents the appearance of fungus, mold, even if the room is very wet.
  5. Economical. To prepare 3 liters of the mixture, you will need only 100 g of dry powder. The consumption of the finished glue does not exceed 350 g per 1 kV. m canvas.
  6. Environmentally friendly and safe, does not pose a danger to people"s health and pets.

Speaking of which, Oscar glue keeps well for two months when kept in a tightly closed container.


There are two forms of the wallpaper mixture produced: liquid and dry. includes:

  • PVA;
  • latex;
  • modified starch;
  • antifungal and anti -flesh additives.

It is a water-based latex-dispersed emulsion in a ready-to-use option.


"Oscar" dry mixture is available in:

  • 200-gram and 400-gram cardboard packages;
  • kilogram and 10-kilogram bags.

The completed glue is packaged in 5 or 10 kg plastic containers.

Ready composition

For internal use, OSCAR liquid adhesive mixture is kept in a sealed container for up to three years. Because of the composition of the frosts, a glue container can be kept at -40 degrees for up to a month. However, after the fifth defrosting, it is no longer appropriate.

Dry glue mixture

Although the two-month shelf life of the Oscar one-component adhesive for internal work is shorter than that of a liquid mixture, it is still frosted. Smell is not the product.

Specifically engineered for glass wallpaper, OSCAR glue provides a smooth finish, easy application, and strong adherence. It is imperative to apply the glue evenly and give it enough time to dry in order to get the best results. In order to guarantee a faultless and long-lasting wallpaper installation, this guide will go over the special qualities of OSCAR glue, such as its strong bonding power and short setting time. It will also include detailed application instructions.


Glue is a cheap material. Depending on its intended use, the final composition has varying consumption. To stick, 10 kg of dry mix is sufficient.

  • 50 sq. m glass wallpaper;
  • 66 sq. m non -woven canvases.

The primer on the prepared surface measuring 132 square meters will receive an equal amount of kilograms.

Crucial! For gluing 20–25 square meters of canvas, 5 kg of wallpaper glue is sufficient if one uses the Oscar adhesive mixture.

Instructions for use

A quality-conscious individual researches the guidelines for mixing the mixture and applying adhesive composition. Set up tools before beginning work:

  1. The container in which the required amount of glue is bred.
  2. Roller or wide brush for applying the composition.
  3. Wooden blade.
  4. Pure rag that is erased by excess glue.
  5. Spatulas: wide metal – for aligning the surface before gluing, and plastic – for smoothing glued glass wallpaper.
  6. Chancellery knife to cut the remaining wallpaper.
  7. Convenient ladder.

Crucial! "Oscar" works with glue while wearing safety gloves.

Preparation of walls

Prior to using the completed adhesive mixture, the surface

  • thoroughly cleaned with water from dirt, dust;
  • Remove the remains of old wallpaper, exfoliated plaster, whitewashing;
  • Cracks, seams, irregularities are cleaned with sandpaper;
  • The brilliant smooth surface is brought to a matte state;
  • Align the walls using gypsum plaster, then they put them down and polish.

At the end of the wall or ceiling, primed with latex primer or diluted wall-clutch "Oscar." The process unifies flimsy, crumbling, or reinforcing bases. The wall or ceiling is left to dry for approximately two hours following the application of the primer layer.

Preparation of the composition

Assemble the working mixture as indicated below:

  1. The required amount of cold clean water is poured into a clean plastic container.
  2. Stiring continuously, with a thin stream, a dry composition formed during stirring the funnel formed when stirring.
  3. Leave the adhesive mixture swell.
  4. Mix once again 5-10 minutes until a homogeneous thick mass is formed.

Continue by pasting fiberglass or glass wallpaper onto the surface.

Speaking of which, It is also necessary to mix the composition before beginning the surfaces if the completed adhesive mixture is going to be used.

Application of glue

Oscar is applied evenly to the wall, ceiling, and decorated surfaces using a roller or a wide brush. Verify that the layer of adhesive is:

  • sufficiently thick (at least 0.5 mm);
  • wider than the glued canvas.

As soon as the composition has been applied and distributed, fiberglass is adhered to the surface. You can then move the canvas to a different location on the wall or ceiling in a matter of twenty minutes. Using a spatula, align the canvases so that the "Christmas tree" moves from the center of the strip to the edges. Because of the porous structure of the glass mobility, the glue "seeps" through the canvas. Using a fresh rag, evenly distribute the excess that leaked onto the canvas. The end has a wheel chopper glued to it.

Requirements necessary for applying glass wallpaper glue:

  1. The room should not be too wet.
  2. Work is carried out at a temperature of +10 to +23 degrees.
  3. Do not allow drafts.
  4. Protect the surface from direct sunlight until the glue of the Oscar dries.

Speaking of which, If fiberglass is glued under additional staining, allow the glue to dry for at least three days before painting.

Property Details
Adhesion Strong bond to glass wallpaper
Drying Time Approximately 24 hours
Application Temperature Room temperature (18-25°C)
Tool Cleanup Water while wet
Surface Preparation Clean and dry, free of dust and grease
Application Method Brush or roller
Coverage About 200-250g per square meter

For glass wallpaper, using OSCAR glue guarantees a polished and long-lasting finish. Because of its powerful adhesive qualities, the wallpaper and wall are securely bonded, preventing peeling or lifting over time. This glue is an indispensable option for this kind of application since it is specifically designed to manage the distinct weight and texture of glass wallpaper.

The key to applying OSCAR glue is preparing the surface properly. Make sure the wall is dust- and debris-free, dry, and clean. A primed and smooth surface makes it easier for the glue to stick, giving the finish a smoother appearance. For optimal results, mix and apply according to the manufacturer’s instructions.

The proper tools must be used for the application to be successful. The glue is easier to apply evenly across the wall when using a high-quality brush or roller. Make sure that all the areas are sufficiently covered by paying attention to the coverage. This avoids gaps and bubbles, which can detract from the wallpaper’s longevity and appearance.

Installation requires precision and patience, and it makes a big difference. Press the wallpaper firmly into place after carefully aligning it. Use a smoothing tool or a wallpaper brush to remove any air bubbles. To guarantee a solid bond, give the drying period recommended by the manufacturer enough time.

All things considered, OSCAR glue is a dependable option for applying glass wallpaper. These application guidelines will help you achieve a stunning, long-lasting finish. This guarantees that your wallpaper will stay firmly in place and attractive for many years to come.

Video on the topic

Webinar of the Alaksar Group of Companies (14 part): the entire range of dry and finished glue OSCAR and Wellton.

Glue for fiberglass. Test Pufas, Oscar, Kleo

Alaksar Civil Code Webinar (5th part): Oscar Glorifier and Window Hollows ready for use.

Mechanized application of OSCAR adhesive for glass -wallpaper and painting glass chloride

How to properly dilute OSCAR glue for glass wallpaper?

What color, in your opinion, is able to make a person happier?
Share to friends
Daria Yakovlev

Interior designer, author of online color design courses. I will help you create a harmonious interior using color.

Rate author
Add a comment