Pouring the floor of the floor on lighthouses with your own hands

Are you thinking about remodeling your floors and finding the concept of installing a self-leveling floor on lighthouses intriguing? This easy-to-do project can completely revamp your room, providing a sleek, contemporary, and useful finish. When remodeling a living room, kitchen, or bathroom, installing a self-leveling floor can improve both functionality and appearance.

Self-leveling floors are becoming more and more well-liked because they can produce a smooth surface free of grout lines and joints. This not only improves their aesthetic appeal but also makes them simpler to maintain and clean. You have control over the process and can tailor elements like color and texture to fit your taste in interior design when you pour the floor yourself.

It’s crucial to comprehend the fundamentals before starting this project. Cementitious materials and polymer resins combine to form self-leveling floors. They flow to create a level, smooth surface when they are poured onto the substrate that has been prepared. This technique is especially useful for old or uneven floors because it can smooth out small flaws and create a new, level foundation.

The versatility of pouring a self-leveling floor is one of its main benefits. With little preparation, it can be applied over a variety of substrates, such as plywood, concrete, and already-installed tiles. Because of its adaptability, it becomes a more affordable option for renovations by minimizing the need for major demolition work. Additionally, the short curing time allows you to take advantage of your new floor quite quickly.

Pouring a self-leveling floor on lighthouses is a rewarding challenge with impressive results, whether you’re a seasoned do-it-yourself enthusiast or exploring new home improvement projects. We’ll lead you through each step in this guide, from planning and material selection to application strategies and final touches. Prepare to revolutionize your area with a sleek, contemporary floor that accentuates the beauty of your house and represents your unique sense of style.

Calculation of the number of lighthouses

You must determine how many beacons are needed for each floor before you can buy the appropriate amount. It is simple to perform calculations.

The guides are positioned parallel to one another, and the beacons are installed from the door to the other side of the room. In lighthouses, the floor screed is taken with a specific step; it should be taken 10 centimeters less than the prescribed amount. If the room is 6.4 meters long and one length is used to apply the rule. five meters.

After that, the computations will appear like this:

• 6.4- (1.3 * 2) = 3.8. 0.8 This is the length of the rule beyond its length, which leaves when aligned to a neighboring section;
• 3.8 /1.3 = 2.9, the result is the number of beacons that are needed for installation without taking into account the extreme guides that take away 0.3m.;
• (6-0.6)/5 = 1.08 m. At this distance, parallel profiles should be installed, put after the first guides installed from the wall with a step of 30 centimeters. The number five means the required number of all lighthouses, including guides.

The guides are positioned parallel to one another, and the beacons are installed from the door to the other side of the room.

Preparation of the floor for the installation of lighthouses

The first step in manually filling the beacons with earth is preparation. First, the condition of the flooring is evaluated. It should be removed if there is an old screed on the floor near the lights. With time, the old coating may tarnish the new one.

If your home’s floors are composed of concrete, the cement composition is used to cover and overlap all of the holes and joints. Tile glue is a good choice for this application because of its high adhesion indicator with various materials.

You must eliminate any imperfections; all gaps have been sealed. Additionally, other designs and skirting boards that might obstruct the floor screed are removed. Next, all forms of pollution are removed from the surface. The surface may reinforce and insulate if needed.

A primer layer should be applied to the floor’s surface to improve adhesion.

Necessary tools and materials

To properly complete this task, you will need to have a variety of tools and materials on hand for work:

• The solution that the coating will be poured;
• Construction level or laser;
• Rule;
• Graters, half terrks;
• Drill with nozzle for mixing;
• Knife;
• Chalk or pencil;
• Roulette and ruler;
• Containers for mixing the solution.

The selection and installation of lighthouses for semi -dry and wet screeds

You can select from a variety of these products to fill the floor screed by lighthouses. Those used for drywall can be used for lighthouses. They are positioned with their sides facing downward and secured with the used solution.

Additionally, the solution itself has special metal profiles attached to it, which can easily be cut to the necessary dimensions. Selecting gypsum with a solution is preferable since it dries considerably quicker than a cement-lendrum mixture. Moreover, profiles can be fastened with self-tapping screws, and twisting and screwing them together makes adjusting their level simple. inserted at 20–30 centimeter intervals, are twisted in dowels.

Two approaches can be combined: a solid composition can be neatly applied in between each screw after multiple self-tapping screws have been screwed. Self-tapping screws have to be inserted approximately a meter apart; their caps will indicate the proper mortar fixer height.

The solution itself can be used to make lighthouses, which are then pulled to the rope screws along the measured level beneath the screed. Cement is poured in the shape of a lighthouse at its peak. These profiles are also spaced out at a distance of roughly 100–120 cm. Using a semi-dry screed, the mixture is evenly distributed throughout the filling level and spilled out twice. In order to progressively cover these areas with a mixture, the room is divided into smaller zones.

The websites’ step is created in the same time as the rule.

Additionally, the solution itself has special metal profiles attached to it, which can easily be cut to the necessary dimensions.

Self -tapping screws in the role of lighthouses

Instead of using guides when creating a bulk floor, self-tapping screws can be used. The technology consists of inserting screws into the base that act as a guide when filling the self-leveling solution. The screws are connected by a thread. The screws are easily removed from the base by twisting them once the job is finished.

How to fill the screed on the lighthouses yourself

You must first prepare the solution before adding floor screed to the beacons; only then can you introduce the solution to the surface.

Preparation of the solution manually

The following actions are part of this process:

1. First, the mixing of cement and sand occurs in the selected proportions, it is difficult to manually make this mixing, it is necessary to ensure that the components are thoroughly mixed. You can use a drill or mixer for this purpose.
2. In another container, a plasticizer with water is mixed, in the instructions for the plasticizer you can see the right ratio, you can add a reinforcing fiber there.
3. The dry mixture is added to the liquid components, and they gradually mix together. You cannot add water to the dry mixture.

Pouring technology

Starting from the opposite angle from the door, you must fill the screed. Pouring the solution between the beacons and just above them results in a slight bias in the rule being maintained, zigzagging movement, alignment, and removal of excess. It adds a solution to the already-existing unevenness. Thus, take action across the board.

In order to prevent cracks and joints from forming, the screed should be completed in one apartment room in a single day.

Discover how to use do-it-yourself techniques to make a smooth, long-lasting floor surface for lighthouses. The procedures for pouring and finishing a floor that satisfies the unique requirements of lighthouse environments are walked through in this article.

Flooring

It takes about 4 weeks for the surface to dry out completely. The surface needs to be covered with a film for about seven days. You should moisten the screed for the first four to five days, but avoid adding a lot of water.

The surface should naturally dry out after a week, and the outside temperature shouldn’t drop below +5.

You can walk on the floor in a day, but it takes five days for weight greater than 100 kg to cause a load.

Doing this kind of work with novices and strength. To ensure that the surface is flat, it is crucial to properly prepare the solution and keep an eye on the level. As long as the beacons are installed correctly, filling will be simple.

The installation of a self-leveling epoxy floor in a lighthouse is a useful and beautiful project. This project gives the interior of the space a contemporary feel while also improving its functionality. The special difficulties of a lighthouse environment can be met with durability and a smooth finish by properly preparing the substrate and selecting the appropriate epoxy resin.

The seamless surface of an epoxy floor, which removes any joints or seams where dirt and moisture can collect, is one of its main benefits. This feature is especially helpful in lighthouses, where corrosion prevention and cleanliness maintenance are essential. Epoxy’s self-leveling characteristics guarantee a uniform layer, improving the floor’s aesthetic appeal and practical upkeep.

Additionally, epoxy resins’ customizable options let designers express their creativity while still fulfilling functional needs. Epoxy flooring is incredibly versatile and can be used in a variety of ways to complement the architectural style and operational requirements of lighthouses, whether the goal is to replicate the tranquil appearance of ocean waves or to go minimalist.

To sum up, the installation of a self-leveling epoxy floor in a lighthouse solves both pragmatic issues and design goals by fusing aesthetic appeal with functionality. This flooring option not only improves upkeep and durability but also gives these iconic buildings’ functional and historic features a distinctly contemporary feel.

Video on the topic

Lighthouses for screeding floor in 4 minutes

Down with metal! The simplest lighthouses and screed of the floor with your own hands. Flat floor and nuances.

The fastest way to install beacons on the screed! Few people know about this