Is it worth pouring a bulk floor on a wooden base, and how to do it correctly

One question that frequently comes up when thinking about renovations for a house with a wooden base is whether installing a bulk floor is worthwhile. Known by another name, self-leveling flooring, this kind of flooring can provide a smooth, long-lasting surface and a sleek, contemporary appearance. However, before choosing whether or not it’s the best option for your wooden base, there are a few things to take into account.

The ability of a bulk floor to produce an extremely even surface is one of its key benefits. In older homes, where the wooden floors may have uneven patches or dips over time, this can be especially helpful. These flaws can be easily concealed by a bulk floor, which offers a level, new finish that is both aesthetically pleasing and useful.

Notwithstanding these advantages, there may be drawbacks. Temperature and humidity variations cause wood to naturally expand and contract, which may compromise the stability of the bulk floor. It’s essential to correctly prepare the wooden base and use the appropriate materials and installation techniques in order to minimize these problems.

Thorough preparation is necessary for a bulk floor installation over a wooden base to be successful. Any loose or damaged boards need to be repaired, and the wooden surface needs to be thoroughly cleaned. In order to guarantee that the self-leveling compound and the wood adhere well, priming must be applied. Additionally, cracking and other problems can be avoided by using a flexible compound made to account for the natural movement of wood.

In conclusion, careful planning and execution are necessary to achieve a smooth, contemporary surface when pouring a bulk floor over a wooden base, though it can be a worthwhile investment. You can take advantage of the practical and aesthetic advantages of a bulk floor in your home by being aware of the particular challenges and taking the appropriate actions.

Is it possible to pour the floors on a wooden base

The majority of the time, improper floors are installed on concrete screeds that require a lot of clutch force. However, polymer and cement coatings work well with other materials, like wood.

The installation of bulk floors is feasible with a suitably prepared base, albeit subject to several limitations. The base needs to fulfill the following specifications in order to fill in a high-quality floor:

  • There are no serious differences in the level, damaged floorboards, rotten areas, creaking boards;
  • All elements are reliably fixed to exclude their bending;
  • good condition of the whole floor.

Counseling! It is preferable to pour onto a tree using specific fine mixtures that are excellent for excessive contact with lumber and do not raise the base height.

Preparation of tools

All equipment is set up ahead of time, and consumables are purchased, to guarantee continuous work. These kinds of devices might be required under certain circumstances:

  • container for kneading the solution;
  • container for measuring water;
  • drill with a mixer nozzle;
  • wide spatula for leveling;
  • spikes roller for removing air bubbles;
  • angle grinding machine or hand grater (cycle);
  • Fighting is fine-grained (180-600 units) with a grater for fastening;
  • Construction vacuum cleaner;
  • The film is plastic or specialized mixture for waterproofing;
  • laser or water;
  • individual protection means;
  • Demopter tape;
  • Lighthouses-referens for filling (if the base is uneven, or the relief is complex).

Additionally, you must buy a sufficient quantity of a reliable manufacturer’s self-leveling mixture that is appropriate for filling on a wooden base (the package will indicate this). These mixtures contain fibers that improve their adhesion to wood.

Spray stones, which are shoe soles with spikes attached to them for walking in flooded areas to align them, will undoubtedly be required for work.

Additional resources and equipment are frequently required to prepare the base:

  • hammer;
  • nail;
  • sealant for sealing joints and cracks;
  • Woods made of wood;
  • priming;
  • brushes;
  • Valiki.

Preparation of the floor for filling

As stated in SP 29.13330.2011, the wooden base needs to be strong, even, clean, and dry before the bulk floor is installed. Based on the assumption that there shouldn’t be any flaws, bitumen, oil, or oil product stains, decay, mold, old paint or varnish, chips, or somewhat sitting boards. The floor is closely inspected to rule out these flaws.

Once the following steps have been followed for the preparation:

  1. Dismantling of skirting boards and flooring. The skirting boards are removed, rotten elements are replaced with new ones, the creaking floorboards are screwed, the bending-fasten more reliably (every 40-50 cm). The entire area of ​​the floor is checked for the presence of differences, gaps, creak. Drying and severely damaged boards on top are sheathed with chipboard or plywood with a thickness of 14 mm. To prevent the creak under the plywood, chalk is poured into the gap.
  2. Little rinse and cycles. If the base is painted, all paint is washed off through special compositions. The cyclovis completely replaces the washing and is considered a more effective method for preparing the floor. Remove (cycles) the upper layer of wood to identify small cracks and other defects. This will also help to slightly reduce the height of the final coating, reduce the difference in adjacent rooms, make the base with rough and more reliably laying waterproofing. For cycling, it is easiest to use grinding machines, Ushm with nozzles with diamond or corundum abrasive.
  3. Cleaning. The surface is cleaned from dust, chips, garbage, which were removed from wood. If this work is not carefully done, the finished coating will not be monolithic, in some places the thickness will change, and the clutch force will deteriorate.
  4. Grunning and sealing. The purified wooden surface is covered with soil (necessarily with antiseptic additives in the composition), and after its drying, the remaining cracks and gaps are revealed, they are covered with an elastic sealant for wood or special putty (a mixture of PVA and sawdust is also suitable). This stage needs to be devoted enough time, otherwise when rolling with a needle roller the solution will fly out of the recesses. After the sealant dries, the processed areas are again primed.

A second coat of primer, preferably covering the entire floor, is applied, along with a small amount of sand or corundum sawdust. For the second layer, you can also use an abrasive-containing special soil that you purchase, or you can use wood glue to securely adhere an interlocking grid to the base.

Fixes the damper tape around the whole perimeter, completing the floor preparation work. Wood won’t split as a result of temperature variations.

Crucial! Every action related to base preparation is only taken once the preceding phase has been finished and the repair trains are totally dry.

Difficulties in the installation of floors

Because the concrete base is sturdy, level, and stable, Paul is thought to be laying on it quite simply. A bar’s surface, boards, and other similar wood don’t have all of these qualities. The boards may even move, "play," or creak if they are not properly fixed.

Despite having a long lifespan, wooden floors become deformed over time due to constant changes in temperature and atmospheric moisture. The tree frequently develops cracks when it dries, and when it has too much humidity, it starts to rot and mold.

These elements have a significant impact on both the bulk floor mounting procedure and the coating’s final quality. In order to mitigate the impact of adverse elements, a comprehensive base preparation is beneficial.

Paul waterproofing requirements

Waterproofing techniques must be used to shield the tree from the solution’s moisture, which could cause the material to swell and deteriorate. Properly forming and securing a dividing waterproofing layer is crucial.

Make use of film, roofing material, coatings, and additional waterproofing options. All of these components will stop wood rot beneath the bulk floor and keep it from drawing moisture out of the mixture.

The entire area is covered with sheet and roller isolates, spaced 10–15 cm apart from one another and with 8–12 cm of stripe overlap. The top of the waterproofing is pasted around the perimeter using dampfer ribbon or insolon that has been cut into strips and is 2 mm thick.

Wood floor filling technology

When working with a concrete base, the floor filling procedure will be similar; the only distinction is a more extended and comprehensive preparation period.

Preparation of a bulk solution

Every self-leveling mixture has preparation instructions that are listed on the package. When using breeding powder, water that has been heated to between +5 and +25 degrees is usually used, and the appropriate amount of mixture is then added.

Using a construction mixer set at a speed of less than 500 revolutions per minute, mix the composition for five minutes. The final product ought to be lump-free and homogenous.

It is combined once more and spread out across the floor after ten minutes. A tiny amount of the solution is made at a time because the mixture should be fully produced in no more than 30 to 60 minutes.

The order of filling

Starting at the location with the lowest coating level, start distributing the solution. When significant variations exist, lighthouses are pre-installed using the level.

Portions of the mixture are poured such that they naturally bond with one another. Using a spatula, carefully level the spilled solution until a layer of roughly 5 mm thick is formed (a large thickness for a wooden base is not allowed). Ensure that the composition fills all the joints and corners equally.

Counseling! Working with an assistant who prepares some of the mixture while the master makes the fill is the best option.

Paints move on the floor. Within 40 minutes of pouring, a rubber needle roller is used to remove air bubbles and perform final leveling.

Particularly smooth joints exist between various batches of the self-leveling mixture. The roller needles’ length ought to be two millimeters greater than the bay’s thickness.

Up until the floor becomes frozen, the lighthouses are taken down one after the other. To prevent dust from collecting on the surface, a film is applied 15 minutes after the work is completed. The ideal temperature for applying a drying coating is less than +25 degrees.

Windows are covered with foil or curtains to block the sun. The final coating—varnish, transparent polyurethane, polymer for three-dimensional flooring, or other materials—is applied after the material has dried.

Question Answer
Is it worth pouring a bulk floor on a wooden base? Yes, but it requires careful preparation and the right materials.
How to do it correctly? Ensure the wooden base is stable, clean, and dry. Use a primer suitable for wood, followed by a flexible, wood-compatible bulk floor compound.

It can be a wise investment to decide to pour a bulk floor over a wooden base, but careful planning and execution are needed. A bulk floor can provide your room with a sleek, long-lasting surface that improves both its look and use. But because wood is a naturally flexible material, a poorly installed bulk floor may crack or have other problems.

The first step in guaranteeing a successful project is to thoroughly prepare the wooden base. This entails making sure the surface is clean and dry as well as sanding it to remove any flaws. Applying a primer made especially for wooden substrates is crucial next. This will enhance the bulk floor material’s adhesion and avert problems later on.

Pay close attention to the manufacturer’s instructions when applying the bulk floor. The best results can be obtained by properly combining the ingredients and pouring the mixture evenly. Allowing enough time for drying and curing is also essential; this can vary based on the particular product being used as well as the surrounding conditions.

You can get the advantages of a bulk floor on a wooden base without any of the typical drawbacks by following these instructions. The installation process requires careful planning and attention to detail. Your new floor will look great and last for a long time if you take the proper approach.

If done properly, pouring a bulk floor over a wooden base can be a cost-effective investment because it offers a smooth, long-lasting, and attractive surface. Ensuring that the wooden base is dry, clean, and firmly fixed is essential for optimal outcomes. To improve adhesion, use an appropriate primer, and think about applying a flexible layer to allow for the natural movement of wood. By taking these precautions, you can help avoid common problems like unevenness or cracking and end up with a professional, long-lasting finish.

Video on the topic

Filling the bulk floor on a wooden base + electric warm floor

Bulk floor on a wooden base

I pour the KNAUF bulk floor on a wooden base. Repair in Stalin Belgorod.

Do not make a bulk floor under the laminate until you see it! TOP – technology!

What color, in your opinion, is able to make a person happier?
Share to friends
Daniel Sedov

Master finish with 20 years of experience. I know everything about painting walls, ceilings, facades. I will gladly help you make your home beautiful and cozy.NoEDIT]

Rate author
Design-Estet.com
Add a comment