Impregnations and oil for Dufa wood – decorative and water -based

The decorative and water-based impregnations and oils offered by Dufa are an excellent option for extending the beauty and longevity of wood. Because of their deep penetration into the wood, these products offer protection from the inside out. Dufa’s products guarantee that your wood will stay strong and appealing for many years to come, regardless of whether you are working on a brand-new project or restoring an antique.

The superior formulations of Dufa’s wood treatments are notable for striking a balance between functionality and aesthetics. The wood’s natural color and grain are enhanced by the decorative oils, which also give it a rich, vivid finish that draws attention to its special qualities. In the meantime, the wood is protected from moisture, UV rays, and normal wear and tear by a transparent, protective layer that is provided by the water-based impregnations.

Another step toward living a more sustainable lifestyle is to use Dufa’s wood oils and impregnations. Because the water-based formulas contain less volatile organic compounds (VOCs), they are safer for the environment and the user. They are therefore a great option for people who want to preserve gorgeous wood surfaces without sacrificing their health or environmental responsibility.

Whether you are an amateur do-it-yourselfer or a professional woodworker, Dufa’s products are simple to use and produce dependable, consistent results. Because of their adaptability, they can be used for a variety of purposes, including indoor flooring and furniture as well as outdoor decking and garden furniture. You can rely on Dufa to finish your wood surfaces beautifully and with adequate protection.

Description

Among the DUFA tree’s products, WoodTex, Dufatex, and Wood Protect are a few well-known options. The business manufactures premium materials that shield wood from the elements, including moisture, wind, snow, and other elements. Additionally, the Wood Protect antiseptic is distinguishable.

The selection process ought to take into account the required attributes, the subject’s operating conditions, and the type of tree. For instance, colorless means or the display of various shades can be employed.

The products’ components vary slightly, offering varying levels of protection. Accordingly, some are limited to use on the outside of the building, while others can only be used inside. Woods impregnation is applicable both inside and outside the structure. It should be mentioned that duff oil for wood is a common remedy.

Properties of the material

When selecting a tool to be submerged in the tree’s surface, it is important to research the product’s characteristics. In addition to providing a layer that can withstand the effects of environmental factors, Wood Protect decorative impregnation for wood protection also has the ability to repel dirt. An alkyd-acrylic solution forms the foundation.

Furthermore, the mixture includes natural oils and solid wax, which contribute to the waterproofing and development of a strong layer. These materials aid in the creation of a dependable coating that is both usable indoors and out and safe for the environment.

Because of the high layer density, drops do not form on the surface and the impregnation is evenly distributed throughout the ceiling, making it simple to apply to vertical surfaces.

Wood Protect is a decorative impregnation that effectively creates a layer that withstands the effects of environmental factors.

Specifications

The exceptional technical qualities of the means account for the popularity of the DUF’s products. It is possible to discern the official features of the widespread impregnation of Wood Protection as follows:

• The product retains the structure of the tree, giving the surface a matte coating;
• High degree of resistance to external influences;
• The layer dries in 60 minutes, full drying takes 12 hours;
• It is necessary to apply 2 layers to obtain a high degree of protection;
• Dilute the product to give the necessary viscosity with water;
• For application, you can use a brush, a sprayer;
• Density from 0.9 g/cm³, this indicator is affected by the selected shade from the palette;
• Environmental friendliness, without smell.

Dufa wood impregnations and oils provide a great option for both protection and decoration. These water-based products offer a strong barrier against wear and moisture while penetrating deeply into the wood to enhance its natural beauty. Dufa’s product line guarantees that your wood surfaces stay resilient and colorful, making them ideal for both indoor and outdoor use. It is also simple to apply. Dufa’s impregnations and oils offer dependable performance and visual appeal, whether you’re looking to protect newly installed artwork or update outdated furniture.

Drying time

A number of variables influence the drying process, including the amount of moisture in the space and the temperature indicators used. It is essential to study this moment in order to comprehend when you can start operating the subject completely.

It is recommended to apply Duf’s impregnation in two layers or more to achieve the necessary and highly effective protective qualities for a wooden base. Before applying the next layer, each one should thoroughly dry; this usually takes an hour.

The ideal working temperature range is +20 to +22 degrees, with an ambient humidity of roughly 65%.

The entire drying process takes twelve hours. After 28 days of surface treatment, the stage is over and treated trees can receive full loads.

Recommendations for use

You should select DUF products based on operating conditions to get the most out of using German-made products. It is crucial to ascertain what uses are appropriate as a result. As was already mentioned, the component parts have extremely useful qualities and can be applied to both internal and external tasks.

The product’s application will aid in creating a waterproof coating that is resistant to different environmental factors. The wood’s structure is deeply penetrated by the acrylic-alcaded base, which helps to create a thick and trustworthy layer. The solution’s high density makes it easy to apply on vertical surfaces, which is why ceiling protection is one of its common uses.

Can be used to process tropical wood as well as nearly all coniferous and deciduous woods. Use it on a range of wooden items, such as arbors, fences, and garages. You can also use it to tint previously painted wooden objects using a different tool.

Not suitable for painting floors or parquet flooring.

Can be used to process tropical wood as well as nearly all coniferous and deciduous woods.

Surface preparation

The surface needs to be properly prepared in order for the application process to go smoothly and for the layers to be distributed evenly. The following guidelines should be followed by experts when preparing a wooden product:

• All types of pollution are removed from the surface, it is also degreased. In the presence of old water -based impregnation, it is completely removed;
• The old tree is rummaged until a new healthy coating is obtained, all flaws are removed, the new wood is also slightly skinned;
• If film -shaped means are applied to the surface, then the compatibility of substances is pre -tested, impregnated to an inconspicuous area;
• The glossy coating should be brought to a small roughness for better adhesion;
• Coating defects in the form of resin spots, rust stains, etc.P. must be processed separately.

Applying a layer of soil blockage, using a thermophene, or removing the old wooden board entirely and replacing it are all options.

For tropical wooden breeds, Dufa Nitro-Universal Verdunner flushing is necessary.

Application

The impregnation process has unique characteristics; however, if you adhere to the professional advice provided below, you can achieve the intended outcome on your own. Thus, submit an application as follows:

• When working outside with new wood, it is first covered with a transparent biosicide impregnation. Когда слой полностью просохнет, наносится 2-3 слоя Дюфы Вуд Протект, каждый слой должен высохнуть до нанесения следующего;
• Internal work does not require priming, it is enough to apply an impregnation in 1-2 layers;
• With an output surface, they work with a primer solution, Wood Protect is applied to 2-3 layers;
• To get the desired shade, it is necessary to draw a test for the color, since the color of the tree affects the resulting result;
• Impregnation should not be applied to areas in which plasticizers are present;
• When working outside the room, transparent impregnation is applied to the surface painted previously with colored paint so that ultraviolet rays do not affect the subject;
• It is forbidden to work at temperature indicators below +8 degrees, and air humidity above 80%;
• It is better to choose a brush with a tool, to increase the speed of painting, you can use a spray gun on even areas. For him, it is allowed to breed impregnation with water, it should not exceed 10% of the total;
• One zone should be processed in one call so that the color is distributed evenly.

General requirements for the basis

Before applying the product, the surface they intend to process needs to be thoroughly cleaned, degreased, and allowed to dry. To keep the color of the entire product the same, it is imperative to guarantee that the wood’s color is uniform. In addition to the old water impregnation, a variety of defective spots are eliminated. To achieve even impregnation, uniform roughness is created throughout the subject.

Before applying the product, the surface they intend to process needs to be thoroughly cleaned, degreased, and allowed to dry.

Technical information

It is advised to periodically inspect the product to see if any surface flaws have appeared; this can be done once every three to four years. If the interior surface is frequently cleaned while in use, three layers of a solution are applied. For such surfaces, it’s also a good idea to apply extra protective varnish.

Selecting a product for floors and horizontal objects used on the street is not advised. He also doesn’t handle showers or kitchen aprons.

If the interior surface is frequently cleaned while in use, three layers of a solution are applied.

The degree of gloss

Following Wood Protect’s processing, the coating will have a half-material color. Noble dullness, a characteristic of the shade, gives the surface a more flawless appearance.

Packing

Products are packaged in three volumes and are displayed in plastic containers for the convenience of customers. Pails available in capacities of 0.75, 2.5, and 10 liters. It is advised to determine the amount of solution needed on the processed surface before making a purchase.

Dilution

It’s not necessary to dilute the solution if the processing tool of choice is a brush; you can use it right away after giving it a quick stir. The product is diluted with water before being used with a spray gun; the dilution should not be more than 10% of the total volume.

The product is diluted with water before being used with a spray gun; the dilution should not be more than 10% of the total volume.

Consumption

The amount consumed is determined by the surface’s condition, the application’s circumstances, and the tool used. It needs to be calculated with these factors in mind. Additionally, the number of layers that will apply is taken into account in the calculations. One liter is used on average for every ten square meters.

Tinting

From a unique catalog, 45 shades of a transparent color can be made stable. A specific tinting machine is used for this purpose. There are several colors available for purchase, including pine, walnut, tick, white, rosewood, and aqua.

Application temperature

It’s critical to follow temperature requirements in order to get the desired outcome. The work indicator has a minimum of +8 degrees and a maximum of +30 degrees. Working in temperatures between +20 and +22 degrees with 65% humidity is ideal.

Drying time

In order for the subject to stain uniformly, it is necessary to wait the full sixty minutes for the layer to dry. The first drying stage will take 12 hours, and the final drying stage will take 28 days. After that, full loads can be used.

Cleaning working tools

After application, the product is immediately rinsed in water to ensure it is completely free of any brush or spray gun residue. There’s no need for extra cleaning solutions.

After application, the product is immediately rinsed in water to ensure it is completely free of any brush or spray gun residue.

Storage

According to storage guidelines, impregnation must be kept in a tightly closed container in a dry, cool environment. A month is the shelf life if the packaging has already been opened; closed containers can be kept for up to 24 months. Frost protection should be provided for the storage area.

Dufa impregnation is a high-quality method for protecting wood’s surface from environmental influences and applying a waterproof layer. The application procedure is easy to complete on your own; the most important thing is to remember to complete the base preparation step.

Dufa Wood Impregnation	Water-based
Dufa Wood Oil	Decorative

Selecting the appropriate oil and impregnation for your woodwork is essential to its long-term durability and visual appeal. The water-based decorative oils and impregnations from Dufa provide an excellent way to preserve and bring out the inherent beauty of wood. Because of their deep penetration design, they offer a strong defense against moisture, UV light, and general wear and tear.

The environmentally friendly composition and ease of application of Dufa’s products make them stand out. Because they are water-based, they have fewer volatile organic compounds (VOCs), which makes them safer for users and less harmful to the environment. Because of this feature, they’re a great option for people who want to maintain their woodwork without sacrificing environmental or health concerns.

Another noteworthy benefit of Dufa’s oils and impregnations is their decorative quality. They not only preserve the wood but also bring out its inherent color and grain. Because of its dual purpose, you can safeguard your wood while still achieving a stunning finish. These products offer a flexible solution for a variety of wood structures, including outdoor decks, indoor furniture, and other projects.

In conclusion, Dufa offers a combination of environmental friendliness, aesthetic enhancement, and protection with their water-based impregnations and oils. For those who want to achieve maximum impact with the least amount of trouble, they are perfect for maintaining the integrity and beauty of their wooden surfaces. Selecting Dufa is an investment in a dependable, superior product that maintains the best possible appearance of your wood for many years to come.

Video on the topic

Overview of decorative coatings for wood! Rolax, Drewno Protector, Alpina, Doctorcteks.

Impregnation antiseptic for wood. Flax oil for wood against impregnation of remers

GAPPA oil for wood processing.

150. Comparison of water and alcohol stain. Oil by the top of the stain. Wood for wood 3V3.