How to use paint with pearl effect

Pearl effect paint can give your projects a gorgeous, iridescent finish by causing surfaces to shimmer in a variety of colors. This kind of paint is popular for furniture, artwork, and home décor in addition to being used frequently in automotive applications. Although applying pearl effect paint can seem intimidating at first, you can achieve professional-looking results by using the right techniques.

It’s crucial to properly prepare your surface before you begin. This entails giving it a thorough cleaning, smoothing it out, and priming it appropriately. The pearl effect paint adheres better and lasts longer when properly prepared. You might need to select a particular kind of primer to go with the material you’re working with, depending on your project.

When it’s time to paint, apply the base coat with even, fluid strokes. The pearl effect is established by this first layer. Applying the pearl effect paint comes next after the base coat has dried. Tiny light-reflecting particles in this paint give it its distinctive shimmering appearance. Apply light, even coats using a spray or brush, letting each layer dry completely before adding the next.

Use a spray gun for the best results as it can apply paint more evenly than a brush or roller. When using a spray gun, keep your distance from the surface constant and make steady, overlapping strokes. Rather than attempting to achieve complete coverage at once, exercise patience and add several thin layers to gradually build up the pearl effect.

Finally, use a clear topcoat to shield your work after you’ve got the desired pearl effect. This keeps the paint safe from wear and scratches while also enhancing its shine. These techniques will help you produce eye-catching, shimmering surfaces that give any project a refined touch.

Step Description
1 Prepare the surface by cleaning and sanding it.
2 Apply a primer to ensure good adhesion.
3 Mix the pearl effect paint thoroughly.
4 Use a spray gun to apply the paint evenly.
5 Allow the paint to dry completely between coats.
6 Apply a clear coat to protect the finish and enhance the pearl effect.
7 Let the clear coat dry fully before handling.

The reasons for the popularity of mother of pearl

The paint with pearl finish works well for decorating furniture, walls, and other specific interior elements. You can play around with the level of shine thanks to the range of shades.

You can create the effect of irritation, or scattering sunlight, by adjusting the concentration of the coloring pigment and experimenting with the protective varnish’s thickness.

Furthermore, a pearl shade can give the appearance of having a velvet or silky texture. Such a coating is sometimes applied to produce a concrete texture.

Key Features

Acrylic resin serves as the foundation for the paints and materials used to decorate the space. This is due to a number of factors. It is non-toxic, to start. Second, since this paint is plastic, you can apply it using the same techniques as plaster. Thirdly, the resin helps the drying process go quickly.

Composition and color palette

Even in ancient times, people knew how to extract a natural mother of pearl from oysters. But in industrial production, this method would lead to a rise in the cost of the product. Therefore, natural pigment is used in the manufacture of cosmetics, and synthetic materials are used for paints and varnishes. For example, the effect of rainbow radiance is achieved by adding mica to paint. If it is natural, it turns out an opaque mother of pearl. Artificial mica makes the material translucent, and complete transparency can be achieved using glass. In the case when the coating is required to give a metal shine, an aluminum or bronze powder is added to the composition.

Pearl, silver, and gold are the three primary hues of mother of pearl.

Because of their high coefficient of refraction, pigment granules give the coating its depth. Their size is crucial: the better the surface is covered, the less intense the gloss, the smaller the granules. Since golden gloss pigment quickly fades in direct sunlight, it is best to avoid using it for decorative gold shine. The silver mother of pearl, on the other hand, is extremely resistant to atmospheric effects.

For what materials is suitable

In what form is the mother -of -pearl paint

  1. Powder that is added to an acrylic basis. The advantage of this form is the ability to independently determine the shade of the coating. At the same time, it is important to observe the proportions of the components of the paint, since if the necessary level of the pigment concentration is exceeded, the coating will comment.
  2. Pastes that also allow you to experiment with shades. In this case, the problem of the improper concentration of the pigment will not appear, but, unlike the powder, its operating time is below.
  3. Finished paint with pearl effect.

Combination with other coatings

Pearl-colored enamel blends well with other colorful coatings such as oil, acrylic, water, and so on. Wax and plastering are two examples of the various impurities that are added when staining a tree with pearl enamel to improve the coating’s quality. This material’s feature allows outdated wallpaper and wooden cladding to be updated.

How to choose a color scheme

You can use the material both pure and healed in the same shade as the base when applying to a primed surface. It should also be one tone lighter. Here, selecting the appropriate color is crucial. If you need to decorate the room in blue or gray, take a silver pigment. A golden mother of pearl works better when the décor is done in yellow or brown tones.

Any surface can be turned into a shimmering masterpiece by using paint with a pearl effect. This technique adds depth and a distinctive, eye-catching finish. From choosing the appropriate paint and prepping your surface to applying the paint in even, smooth coats, this guide will walk you through the entire process. Whether you want a bold, reflective surface or a subtle shine, we’ll go over the methods and advice required to get results that look professional. Pearl effect paint can add a captivating beauty to any space with the right technique and a little perseverance.

Decoration opportunities

The composition of the paintwork determines the potential for creating textures and optical effects during the final stage of surface decoration.

Paints with a strong and weak concentration differ in terms of how much pearl pigment is added to the material.

Strong concentration

In a composition like this, a lot of pigment is added, making the coating’s eventual color less important. This material is being used to create a shiny, bright surface. As a result, the entire room’s design, which features a high percentage of mother-of-pearl, which is rarely used, has a flipping effect that is so potent that it may have detrimental psychological effects.

But, this kind of material is ideal if you want to draw attention to a specific interior feature. You have two options: either purchase a ready-made product or add the pigment to the base composition to achieve a high concentration of mother of pearl yourself.

Weak concentration

In contrast to the prior technique, which used a weak concentration, the coating’s color is prioritized. You can create the effect of light flicker, which varies depending on the lighting and viewing angle, by using a composition with a small amount of pearl pigment on the walls or ceiling. The room feels comfortable as a result of this.

Advantages and disadvantages of pearl paint

One benefit of this type of coating is its adaptability. You can use paint containing pearl pigment to adorn walls, ceilings, and other surfaces.

The safety of the environment and human health is the second benefit. The only exception are situations in which the pigment was mixed with an alkyd base that is environmentally neutral.

The majority of cases are made in a water-dispersion form, which eliminates the disagreeable smell that comes with other paints and varnishes and makes diluting them with water simple.

The surface covered with such material dries quickly for the same reason.

The paint holds up well. It is resilient to other outside influences and does not fade or crack. If you keep a close eye on the surface’s cleanliness and promptly remove any dust, you won’t need to replace the coating very soon.

The cost of the material is a drawback. Pearlescent compositions are not considered budgetary on the LKM market. However, if you purchase the pigment in the needed shade and make your own paint, the cost of the coating can be decreased.

Tools and technology of application

Paint with a pearl effect can be applied without the use of specialized tools.

The same techniques that you use for staining walls and ceilings with other paint finishes can be applied here:

  • foam sponge;
  • spray gun;
  • brush or brush;
  • Maular roller;
  • Venetian Kelm;
  • putty knife.

In certain situations, additional tools are needed for more point decoration. For instance, masking tape is used when painting a portion of a surface rather than the entire thing.

Three phases can be distinguished in the room’s decoration process: preparation, staining, and decoration.

The treated surface must first be thoroughly examined for any flaws, such as chips, irregularities, roughnesses, or cracks. To be eliminated are all of these flaws. Putty is used to align uneven walls or ceilings, and the ledges are either cleaned or rearranged. It’s critical to thoroughly clean the surface to remove any remaining coating or stains.

Following that, a material primer is applied to the wall, the color of which will be blended with decorative paint. Depending on the composition used, the primed surface dries in 6–8 hours. If you haven’t already purchased pearl enamel in ready-made form, you can prepare it during this time. The material is tinted with different pigments if needed.

Additionally, a start line is made by a thin brush. When painting walls, the work is done from below the ceiling. It is 5–10 cm wide. This border prevents the ceiling from getting stained, say, in the event that a painting roller is used.

Subsequently, a continuous paint layer is applied, which would otherwise be basic. It dries in about an hour, though certain compositions might dry in as little as 30 to 40 minutes.

A second layer of pearl enamel is then applied, fragmentarily covering the dried surface. At this stage of decoration, different tools are created to achieve the desired visual effects. When using material that is one or two tones lighter than the base, special expressiveness can be achieved. You can accomplish this by combining the non-launched composition with a tinted in a 1:1 ratio.

It is preferable to use compounds from a single manufacturer, t.To, at every stage of the project. This ensures that they will be more compatible with one another. The only exception is if the paint is produced separately.

Subject to all staining guidelines, 200 milliliters of material are used for every square meter.

  • What is the paint consumption per 1 m2 walls?
  • Expenditures of emulsion paint per 1 m2;
  • How to calculate the consumption of acrylic paint for 1 m2;
  • Consumption of water -based paint for 1 m2;

Soft sponge

The foam sponge’s texture is ideal for crafting a variety of designs and embellishments. As a result, it is applied during the additional decoration stage rather than when covering the entire surface.

The sponge needs to be well-squeezed and moistened with water before beginning work. The tool is lightly dipped in paint to prevent subtexts, and if needed, it is further wetted with a piece of paper. Either move in circles or apply a light pressure to the wall while working for them.

Spraying with a spray gun

The composition is distributed uniformly across the stained surface thanks to this tool. In this instance, dilution of the paint with water (in this case, up to 40%) is required to prevent tool clogging. Diluted material has a consistency similar to sour cream. It is preferable to use a different tool if adding water does not seem appropriate for any reason.

  • Krascolet – what it is;
  • How to choose a spray gun;
  • How to paint a spray gun;
  • Pneumatic spray gun;
  • Electric spray gun (electrical scrap);
  • Manual spray gun;
  • An airless spray gun;
  • Manual spray gun for whitewashing;
  • Spray gun for water -based paint;
  • DIY spray gun;
  • Settings of a spray gun;


This is a better tool to use when working in small spaces. The process of staining a wall involves using a brush or brushes, which can consume a lot of material and involve a lot of physical labor.

When designing corners with intricate plot relief and those that are inaccessible (like those behind batteries), it is best to use a brush.

You can achieve an uncommon look by using two round brushes. Every one of them dives into a pigment that is a different color (like blue and white). When drawing on the wall, their combination and haphazard application will be helpful.

Maular roller

These rollers will require a minimum of three because the work is done in phases.

Since the tool can be constructed from a variety of materials, the following details need to be considered:

  • fur is more suitable for priming the surface;
  • Velorov is performed basic staining;
  • foam rubber is used to cover the mother -of -pearl composition.

You can also use a regular rag or a textured roller to create different kinds of wall drawings. It is wrapped around a painted roller after being painted, squeezed, and twisted in a tourniquet. Following these adjustments, you are ready to begin decorating. Such a tool produces the appearance of "crumpled walls."

You can apply paint economically and evenly with the painting roller. Furthermore, it makes it the simplest to set up distinct borders between various surface areas.


The pearl paint’s high viscosity allows for the use of a spatula. Fits both plastic and metal instruments. An 80 mm spatula is the ideal width. This tool can be auxiliary at times. For instance, it makes sense for them to distribute the material by decorated cell. A textured roller can be used in place of the spatula and celmus.

How to restore the surface of the wallpaper and wooden cladding

You can use the material to update the worn-out coating due to its high compatibility with other coatings. A thin coat of pearl paint can be applied to wooden coatings whose varnish has occasionally darkened. Use an aerosol sprayer or buy materials in aerosol packaging to accomplish this.

Similarly, surfaces painted with different emulsion compositions or old wallpaper can have their reflective qualities improved. Even though the material doesn’t adhere well to plastic surfaces, you can still enhance their shine and reflective effect by using the same pneumatic spray gun and mother-of-pearl paint.

Making pearl paint with your own hands

Art stores sell a variety of Persian pearl pigments. The most common type is finely divided powder.

Gummiarabik, which is an extract of acacia resin, must also be purchased. It is best to take this substance with water based finishing work. Sometimes color is enhanced with ink.

You will need a small clean and dry capacity for paint manufacturing. The hummiarabic is added after a mother-of-pearl pigment has been added. The ideal ratios of the component parts in the mixture: Depending on the required gloss intensity, 3–5 parts of powder are needed for every 1 part of hummiarabic.

Should the mixture be excessively thick and a spray gun be intended for the task, it needs to be thinned with water. The composition can be applied to the surfaces for decoration after it has been thoroughly mixed (it is crucial to make sure that the composition is lump-free).

Designer advice

When designing the interior, you should start with things like:

  • room area;
  • its purpose (too bright shades and a strong concentration of mother of pearl are unlikely to be suitable for the bedroom);
  • Lighting intensity.

Designers provide a number of fundamentally useful decor tips. In particular, it is best to apply a blue background layer without using mother-of-pearl pigment in rooms with adequate lighting.

Although the material for the second layer already has powder added to it, it is preferable to select a color from a different spectrum. As a result, the surface will shimmer in various shades as the angle changes, creating an odd visual effect.

Numerous decor options can revitalize a room that appears somewhat drab and is decorated with neutral colors.

For instance, cut a stencil from a thick sheet of paper (perhaps in the shape of a sheet of wood) to the appropriate size and shape. Next, dab it with a tiny bit of pearl paint. Such a template ought to be placed in a random order on the wall for a brief period of time. If you’d like, you can use a brush to sketch the trunk of the tree and a stencil to make the crown.

Any surface can be made to look much more appealing by using paint with a pearl effect, which gives the surface a glossy, shimmering finish that changes color with the light. This kind of paint is a popular option for both interior and exterior projects because it adds elegance and depth. You can get results that look impressive and professional by adhering to a few essential steps.

A successful application requires preparation. Ensure that the surface is properly primed, smooth, and clean. To guarantee that the paint adheres well, sand any rough areas and clear away any dust or debris. Using a base coat in a color that goes well with the pearl effect will help make the finish more even and colorful.

Use even, fluid strokes to apply pearl effect paint to prevent streaks and uneven coverage. To ensure uniform distribution of the pearl particles, it is often more effective to apply multiple thin layers rather than a single thick coat. Before adding the next layer, let the previous one completely dry to prevent smudging or peeling.

Use a clear coat to preserve your painting after it has been painted. This protects the surface from wear and scratches while also adding durability and sheen. To get the best results, give the final coat of paint and clear coat enough time to dry.

Pearl effect paint can be used to create eye-catching, stunning finishes if these steps are carefully followed. Pearl paint’s shimmering quality can turn plain surfaces into amazing works of art, whether you’re updating furniture, walls, or even cars. Savor the procedure and the exquisite, polished result it gives your projects.

Video on the topic

Master class on multicolor interior mother-of-pearl coating Veloura (mother of pearl)

Pearl enamel color gold

Instructions for applying a glossal pigment – Gold Silver Brilliant

Effetto Seta Avanti, Arcobaleno (decorative paint with silk effect). Application instructions

What color, in your opinion, is able to make a person happier?
Share to friends
Maria Vlasova

Chemist-technologist, expert on paint and varnish materials. I will help you figure out the compositions of paints, their characteristics and choose the best option for your purposes.

Rate author
Add a comment