How to paint a heated towel rail in the bathroom

Refreshing the paint in your bathroom can be an easy yet powerful way to give it a new lease on life. Painting your heated towel rail can revitalize the area if you’re looking to give it a little TLC. Painting your heated towel rail is a fairly simple do-it-yourself project, and it can be done to match your bathroom decor or just give it a new look.

It’s crucial to properly prepare before beginning the painting process. To begin, give the towel rail’s surface a thorough cleaning to get rid of any dust, filth, or residue. Usually, a solution of water and mild soap works well. After cleaning, let it air dry fully before handling again.

Selecting the appropriate paint and primer for your heated towel rail is also very important. For long-lasting results, use paint that is specifically made to withstand high temperatures on metal surfaces. A primer designed specifically for metal surfaces will also improve paint adhesion and produce a smoother finish.

It’s time to paint after you’ve gathered your materials and readyed the surface. Start by giving the towel rail a light, even coat of primer, being careful to cover every surface equally. Before moving on to the next step, let the primer completely dry in accordance with the manufacturer’s instructions.

You can begin painting once the primer has dried. For smooth and even coverage, use a small brush or a spray paint made for metal surfaces. Moving from one end of the towel rail to the other, apply the paint in thin, overlapping strokes. Make sure you let each coat completely dry before moving on to the next.

Reinstalling the heated towel rail in your bathroom requires waiting for the last coat of paint to completely dry after you’ve reached the desired coverage. You might have to wait anywhere from a few hours to overnight for the paint to fully cure, depending on the type of paint that was used.

Your heated towel rail will look brand new and give your bathroom a stylish touch with a new coat of paint. In addition, doing this DIY project yourself can help you save money and feel good about yourself because you’ve changed your space on your own.

Step Instructions
Clean Ensure the towel rail is free from dust and grease by wiping it down with a damp cloth.
Prepare Surface Use sandpaper to lightly roughen the surface for better paint adhesion.
Protect Surroundings Use masking tape to cover any areas you don"t want to paint.
Prime Apply a coat of primer specifically designed for metal surfaces and let it dry completely.
Paint Using a paintbrush or spray paint, apply an even coat of paint in your desired color. Let it dry completely.
Second Coat (Optional) If needed, apply a second coat of paint for better coverage and durability.
Finish Remove masking tape and allow the paint to cure according to the manufacturer"s instructions before using the towel rail.

Beginning of work

Contemporary materials, used to make heated towel rails (coils), are strong, dependable, and maintain their external sheen over the course of their useful lives. However, the old plumbing has long since lost its appeal and usefulness—especially the parts that have already been painted multiple times. It is the one that needs to be restored after the metal’s black coating has been cleaned. A fresh coat of paint will quickly fall behind if the preparation is of low quality.

It’s critical to understand where to begin when utilizing a heated towel rail. To begin with, get a set of screwdrivers ready so you can take the device out of the wall. Previously, because the snake was overheating, you had to turn off the water and let it cool completely. Paint applied directly onto hot metal will dry quickly and result in an unstable final coating. Furthermore, there will be an increase in the amount of health risks as paint’s solvents evaporate more intensely.

Painting a heated towel rail is best done during a seasonal hot water outage. Even in the event that the coil is devoid of a distinct locking reinforcement, this will aid in preventing neighbor flooding. Therefore, after removing the heated towel rail and letting it cool to room temperature, all staining operations are completed on the device.

We’ll walk you through the easy process of painting a heated towel rail in your bathroom in this article. Painting your towel rail can be an easy do-it-yourself project if you want to update its look or make it match your decor. Everything will be covered, from priming the surface to selecting the appropriate paint to evenly applying it for a polished appearance. Your towel rail will look brand new in no time with our simple instructions, giving your bathroom a modern update.

The choice of paint

Choosing a composition of superior quality is crucial, as it will dictate the final product’s appearance and coating longevity. Traditional paintwork is inappropriate because the heated towel rail crackles right away due to regular heating. Precise thermal resistance is important to consider when purchasing; paint for a heated towel rail must be able to tolerate temperatures as high as +120 to +180 degrees.

Additionally, premium coil staining material ought to possess the following qualities:

  • resistance to water, the possibility of use in wet rooms;
  • resistance to wear, friction, mechanical effects;
  • anti -corrosion properties, the absence of components harmful to metal in the composition.

In terms of color, you should select a tone that fits the subject and style of the bath. Paint for chrome, silver, gold, and other metallic coatings is the most popular choice among users. The towels in red, dark blue, and black appear unique.

The paints are mixed together and the shades can be blended if preferred. Purchasing only white LKM is not advised because even the most resilient material will eventually lose color and turn yellow due to temperature changes.

Oil paints

These kinds of funds shouldn’t be used on heated surfaces. They are not heat-resistant, have a weak clutch, quickly fall behind the basics, smell bad, and have a short service life.

Acrylic paints

Because of their smooth texture, acrylic compositions are easy to apply and leave an evenly spread layer without leaving behind any stains or fluxes. They also do not smell or distinguish harmful fumes. Acrylic paints have a high degree of surface adhesion and dry quickly. They also have rapid abrasion and poor mechanical and chemical resistance.

Silicone LKM

These paints are made from rubber and other resins that have been diluted with organic solvents or water. The material in the form of a suspension is long-lasting (up to 15 years), resistant to wear and moisture, and does not degrade when exposed to high temperatures. Paints containing solvents are especially dependable, but they do have a strong smell that persists until the paint dries.

Alkyd enamel

Paints and special pigments based on glyftal or pentafal varnish are thought to be heat-resistant (able to endure temperatures as high as +180 degrees), making them perfect for heating radiators, heated towers, pipes, and batteries. The final coating does not darken, crack, or snap for a very long time.

The LKP has a minimum 10-year service life, and the film is resistant to mechanical forces, water, and common household chemicals. Selecting matte or silky-glossy alkyd enamels in the desired color is preferable because they have the most attractive appearance. The only drawback to these colors is that they contain solvents, which causes them to smell bad after a few days.

Materials and tools for work

After purchasing paint and taking apart a heated towel rail, you must set up the following tools and supplies:

  • brushes with natural pile;
  • sandpaper with different grains;
  • metal brush;
  • metal primer;
  • gloves and other personal protective equipment;
  • detergent;
  • water;
  • putty knife;
  • rag;
  • degreasing;
  • Anti -corrosion composition.

Preparatory work

The quality of preparation is what determines how effective any work will be; if the product is not perfectly smooth, the paint will not adhere to its surface.

Stripping the base

To ensure that no paint or varnish remains, the previous coating must be entirely removed. Sandpaper and a metal brush can be used for this, but if a grinder or grinding machine is available, the process will go much more quickly. Metal that has been painted using sandblasting equipment is frequently cleaned by professionals. Chemical washing or thermofine are appropriate for this purpose.

Gloves, eyewear, and a respirator are put on before beginning any preparatory work. Make sure the space is well ventilated, or clean the heated towel rail outside.

Take this action:

  1. Clean the most poorly fixed pieces of paint, removing them with layers.
  2. Work out with sandpaper slots, corners, bends.
  3. Elements of corrosion are especially carefully removed if they are.
  4. They wash the heated towel rail with water with detergent, removing all the smallest particles of paint, dirt and evaluating the result.
  5. The metal is being cleaned once again if the unprocessed areas are revealed.
  6. Dry the base, then wipe it with a degreaser.
  7. If there was rust on the metal, the anti -corrosion composition is applied to all surfaces.

The primer of a heated towel rail

The last step in getting a heated towel rail ready for staining is priming. It’s important to pick the soil carefully because it should be suitable for metal surfaces and able to withstand the effects of high temperatures. Purchasing an alkyd primer and applying it in a thin, even layer is the best option. You must carry out the procedure once more once it has dried.


Painting is typically not difficult because all work is done with a brush:

  1. Mix the paint thoroughly until a homogeneous consistency.
  2. Gently dip the tip of a narrow brush in the paint, applied to the upper sections of the heated towel rail – this will help to avoid drops, fluxes.
  3. Completely stain the product, give the material to dry (usually 2-3 hours).
  4. Repeat painting 1-2 times.
  5. After 4-5 days, the coil is put into operation.

Use a small spray gunner in place of a brush. It will enable you to apply a treatment free of stains and with a perfectly even layer, all without the worry of hairs appearing on the product’s surface.

It is necessary to add a small amount of solvent to spray paint because it should be more liquid than when applied with a brush.

Painting metal, galvanized and polymer pipes – features

When staining metal pipes and towels, the most important step is to thoroughly clean the surface to remove any remaining paint as well as any rust. Anti-corrosion treatment is essential; otherwise, a fresh layer of rust will soon appear beneath the paint, turning LKM into click.

Since galvanized pipes have a strong protective coating on their exterior, they typically don’t need to be painted. To stylize the towel, however, it can also be treated with an alkyd or silicone composition in the desired color if needed. The base needs to be primed before applying it; otherwise, the clutch’s quality will significantly decline. Make sure there is no condensation on the subject before staining.

Additionally, polymer products are painted solely to alter the interior of the space; priming is required but anti-corrosion precautions are not needed for the work. Paints without acetone or other strong solvents in the mixture are used on plastic.

One easy yet powerful way to give your bathroom a makeover is to paint the heated towel rail. It doesn’t have to be difficult, regardless of whether your goal is to match it to your bathroom’s decor or give it a brand-new color. You can achieve a polished finish that will improve the overall appearance of your bathroom by adhering to a few essential steps.

First and foremost, being prepared is essential. Make sure to give the towel rail’s surface a thorough cleaning to get rid of any grease, dust, or dirt. This will guarantee that the paint clings correctly and leaves a smooth surface. In order to provide a good foundation for the fresh paint to adhere to, it’s critical to sand down any previous paint layers.

Next, pick the appropriate paint type for the task. Select a paint that is of superior quality, made especially for metal surfaces, and can endure high temperatures. By doing this, you can be sure that your painted towel rail will look fantastic and last through time—even in the steamy bathroom.

Take your time and apply light, even coats of paint when applying it. This will guarantee a consistent finish and lessen the chance of drips. For full coverage, you might need to apply multiple coats of paint, depending on the type you choose. Before applying the next coat, let the previous one completely dry.

Lastly, to further improve durability and moisture resistance, think about adding a clear protective topcoat after the paint has completely dried. By doing this, you can help your painted towel rail last longer and maintain its original appearance for many years to come. You can quickly change the appearance of your bathroom and give it a unique touch with these easy steps.

Video on the topic

How to paint an old heated towel rail.

Painting of heated towel rails

DIY Restoration Restoration

Update the coil in the bathroom with paints

What color, in your opinion, is able to make a person happier?
Share to friends
Daniel Sedov

Master finish with 20 years of experience. I know everything about painting walls, ceilings, facades. I will gladly help you make your home beautiful and cozy.NoEDIT]

Rate author
Add a comment