One easy, yet very effective, way to protect your walls from damage and improve their appearance is to add a plastic corner to the angle of each wall. Plastic corners are a quick and inexpensive fix for any surface, whether you’re dealing with high traffic areas or simply want a cleaner finish. You will follow this guide’s instructions to guarantee a tidy and safe installation.
It is imperative that you gather all necessary materials before beginning. A plastic corner strip, plastic-safe glue, a measuring tape, a pencil, a utility knife, and a clean cloth are required. Having everything ready will facilitate a more efficient and seamless process.
Measuring the angle at which you want to install the plastic corner is the first step. Precise measurements guarantee a secure fit and a polished appearance. After you have the measurements, use a utility knife to carefully cut the plastic strip to the desired length. To prevent errors, it’s a good idea to double-check your measurements before cutting.
Next, get the plastic corner and the wall surface ready for glue. Dust and grease should be completely removed from both surfaces to ensure proper adhesion of the adhesive. After the plastic corner has been cleaned, evenly coat its back with a thin layer of adhesive. Take care not to use too much glue because it can leak out and make a mess.
Press firmly to secure the plastic corner against the wall angle. Give it a few minutes to set the adhesive by holding it in place. To ensure optimal outcomes, refer to the manufacturer’s instructions as certain adhesives might need more time to fully cure. If required, fasten the plastic corner with painter’s tape while the glue dries fully.
Lastly, take off any painter’s tape and examine the installation after the adhesive has completely dried. Using a clean cloth or a utility knife, carefully remove any extra adhesive that may have formed around the edges. Now that your plastic corner is firmly in place, your wall’s angle will be protected and appear polished.
- Corners to protect wall angles: selection options
- Types of protective corners: from what materials
- Forms and sizes
- What to fasten
- Arch finish
- How to glue and what glue to use
- Liquid Nails
- Polyurethane glue
- Silicone sealant
- How to stick a plastic corner yourself
- How and how to glue the corner of plastic to different surfaces
- To walls made of drywall
- To the painted surface
- To a wooden surface
- On the door or window soda
- To a metal profile
- To the tile corner
- To plastic panels
- How to glue a plastic corner to wallpaper
- How to cut finishing corners
- Video on the topic
- How I glued plastic corners on the wall and windows.
- How to glue a plastic corner on wallpaper + cutting under 45 °
- How to glue the finishing corner to slopes and corners
- Speech 5min.How to glue a plastic corner on the slopes, the outer angles of the walls. Angle plastic video
Corners to protect wall angles: selection options
Not everyone finds the plastic corners that are used to protect wall angles or other materials to be aesthetically pleasing. But no, in order to prevent the corner sections from undermining other choices for fortifying the wallpaper canvases. Or you must complete the angle beforehand.
If you adhere to the guidelines for their selection for design, corners made of plastic, foam, and other materials will look more appealing inside. These guidelines are as follows:
- Under the shade of wall decoration, if it is possible to observe the coincidence of the texture, then the result will be optimal;
- Under the shade of the doors, the reception works well in the corridors, where there are many doors;
- To the color of skirting boards;
- Color version, when one shade is selected and accents around the room are placed with the help of it, not only in the corner part;
- A single in structure and color option with flooring.
As a result, selecting the material ought to happen after the repairs are finished and the furniture is going to be used in the field. It will then be simpler to determine which shade is superior visually.
Colorless options are available for purchase in cases where determining the hosts’ shade proves to be unsuccessful.
After the repairs are completed and the furniture is going to be placed in use, the material should be chosen.
Types of protective corners: from what materials
Prior to learning how to apply wallpaper to a corner of a wall, you should be aware of the different kinds. The focus of this article is on work done inside the house, and the following categories of corners are identified:
- Plastic, created different in shade, texture;
- Metal;
- Made of wood, can create relief on the surface;
- MDF, create the effect of different wood, there can be drawings, the structure is smooth;
- Cork;
- From rubber, popular with their use in medical and children"s institutions;
- Foamed type of rubber, soft option, convenient for rooms for children;
- Decorative, they are supplemented by different details – strands, pebbles, etc.P.
Plastic products are chosen most frequently because there are plenty of options available. You can select the ideal shade and texture for them to look gorgeous and fashionable in the space if you search for it.
Forms and sizes
Standard ready-made product options have an angle of ninety degrees. Although rounded forms are also present, sharp angles are the norm. The material can be classified into the following categories based on its level of protection:
- Tough;
- External;
- Internal;
- Flexible;
- Universal.
The flexible and soft center part of the latter type gives them the ability to be glued on corners with varying degrees of inclination, hence their name. As a result, this zone’s protective capabilities are somewhat diminished.
The material shelves come in a variety of sizes; the same sides are the most common, but they can also have different widths. There is also variation in width; here, the owner’s preferences and the details of the angle are taken into consideration.
What to fasten
Depending on the kind of base and the product’s material, a decision is made regarding how to join a corner to the surface. Typically, a glue solution is used that can handle a lightweight product’s dependable fixation.
Liquid nails are widely used because they’re convenient to work with. however appropriate for flat surfaces. It is preferable to use silicone-based glue to attach materials to walls that have flaws. Options are available for a transparent and white variety.
Depending on the kind of base and the product’s material, a decision is made regarding how to join a corner to the surface.
Arch finish
Since the angles in this passage frequently occur and cause scuffs or tears in the wallpaper, the arched area is typically protected. Sticking the product to its flat side is not difficult; for beginners, however, working with a rounded part can present challenges. Products that are universal and flexible come to the rescue. From a unique polymer of plastic corners, you can select an elastic kind.
For arches, there are dedicated corners. The width of their stripes differs; the first is 10 mm narrow, while the second is more than 30 mm wide. They are easily bent; the only thing left to do is make sure the fixation is solid before the glue dries.
Since the angles in this passage frequently occur and cause scuffs or tears in the wallpaper, the arched area is typically protected.
A quick and easy do-it-yourself project that can improve the longevity and aesthetics of your walls is to glue a plastic corner to the angle of the wall. You must prepare the wall surface, select the appropriate adhesive, and make sure that the application is precise in order to produce a strong and tidy finish. You can easily protect your wall corners from damage and give them a polished look by following a few simple steps: clean the area, apply the glue evenly, and hold the plastic corner firmly in place until it sets.
How to glue and what glue to use
In order to ensure a dependable fixation and avoid having to redo the work, it is crucial to understand how to glue the PVC corner to the wallpaper. Offers a wide selection of adhesives that work well. They are separated based on the primary component.
Knowing how to glue a PVC corner is crucial for a dependable fixation that avoids having to redo the work.
Liquid Nails
Because of its easy application and dependable fixation, this type is the most widely used. Two categories of comparable goods exist. First, the manufacturers are kept up to date; second, organic solvents are employed. Call them neoprene and acrylic nails.
Their excellent surface adhesion sets them apart, and setting takes little time at all.
Polyurethane glue
Polymers that can form foam and guarantee the dependability of the material connection serve as the foundation. One-component and two-component options are available. Among the benefits are the high level of moisture resistance, the creation of a stiff hitch, and the consistency of adhering to various surfaces.
Experts state that this glue will function admirably if it is necessary to affix a plastic corner to a plastic panel.
Polymers that can form foam and guarantee the dependability of the material connection serve as the foundation.
Silicone sealant
This PVC corner glue can be used to join items with cladding, tiles, wallpaper, and plastic panels. With improved adhesive properties, this is a good choice for bathroom work. The base of silicone produces a robust outcome.
How to stick a plastic corner yourself
The technique for adhering the corners is straightforward, and you could easily accomplish it by hand. The subsequent actions need to be carried out:
- Check that the angle is purified and dry.
- The adhesive solution is applied to the product, followed by it to the surface, masking tape is used to fix during the drying of the glue.
- They wait for the necessary time to dry the glue that the tools look at the label, and remove the adhesive tape.
If the wallpaper on the wall has been painted over, double-sided tape can be used to fix it. It is adhered to the wall after first being glued to the corner.
If the wallpaper on the wall has been painted over, double-sided tape can be used to fix it.
How and how to glue the corner of plastic to different surfaces
It’s important to make the right decision when choosing how to adhere a plastic corner to wallpaper or other surfaces. Not all adhesive solutions are capable of forming a robust bond with various bases. There are also some differences in work technology.
To walls made of drywall
The material plasterboard is frequently used to make arched slopes. Select a product type that is curved; liquid nails can be used to fix it. Alternatively, the screws can be tightened if they plan to finish with a different material; however, in this case, it’s crucial to avoid breaking the plastic.
To the painted surface
The painted surface must first be cleaned, and any fat deposits must be eliminated. Selecting a sealed composition made of acrylic is preferable since it is safe for the material. The product is smeared on the panel by dashed lines, then it is pressed to the base using glued masking tape.
To a wooden surface
A wall that is low-fat and clean can be worked with. Using a fixer, a rubber solution is taken. Put the product on the base as well as the products. On construction tape, fixing is done prior to drying.
On the door or window soda
The unevenness of the window makes working with it difficult. They start by measuring the length and marking the areas where the material will be chopped off. When gluing, the type of glue chosen depends on the slope’s material. Liquid nails are typically used as a silicone sealant.
To a metal profile
The metal needs to be degreased beforehand. Panels may be fastened using liquid nails, epoxy resin, polyurethane, or phenolocaucus glue.
To the tile corner
The tile material and the bathroom are still separated; they start with the sealing. Select exterior corners that are more convenient. The surface needs to be clean and free of grease. You have two options for adhesive solutions: silicone sealant or liquid nails.
To plastic panels
It is convenient to use products that already come with double-sided tape for this base. Liquid nails, silicone adhesive, acrylic, or polyurethane are used.
How to glue a plastic corner to wallpaper
Liquid nails on vinyl or other wallpapers are typically selected based on the adhesive’s composition. It is crucial to avoid damaging the canvas; the glue is measured to ensure that it stays inside the product’s borders.
How to cut finishing corners
It is best to choose the tool according to the material of the corner. For wood, metal, and thick plastic, use a hacksaw that is appropriate for the material. Scissors and a knife can be used to cut thin plastic.
The aesthetic qualities of finishing materials can last longer at corners. You can easily select the option that best fits the design thanks to the wide range of products available. It doesn’t take long to process the work, and you can complete it on your own.
| Step | Instructions |
| 1 | Clean the wall corner |
| 2 | Measure and cut the plastic corner to size |
| 3 | Apply adhesive to the plastic corner |
| 4 | Press the plastic corner onto the wall corner |
| 5 | Hold in place until adhesive sets |
| 6 | Remove any excess adhesive |
Gluing a plastic corner to a wall’s angle is an easy and satisfying do-it-yourself project. It improves the appearance of your space and gives wall corners more security. A safe and strong bond can be established by attentively adhering to a few crucial procedures.
First things first, preparation is essential. Make sure the surface is completely clean to get rid of any debris, oil, or dust. Proper preparation of the surface guarantees proper adhesion of the adhesive, thereby averting future problems. To ensure a perfect fit, measure the corner precisely and cut the plastic trim to the precise length required.
Next, evenly coat the plastic corner’s back with adhesive. Utilize a plastic-specific adhesive to guarantee a solid hold. To give the adhesive time to solidify, press the corner firmly into position and hold it there for a few minutes. While the adhesive cures completely, use masking tape to hold the corner in place for additional security.
Lastly, take off the masking tape and examine the corner after the adhesive has dried. Verify that it is securely fastened and that no holes or loose edges exist. If required, you can improve the look and seal any tiny gaps by running a thin bead of caulk along the edges.
You can successfully glue a plastic corner to the angle of a wall by following these easy steps. This project not only makes your area look better, but it also gives high-traffic areas durability, protecting your walls for years to come.
