How to effectively glue the carpet

Although it may seem like a difficult task, adhering carpet can be completed quickly and expertly with the correct methods and supplies. Whether you’re trying to update a single room or a larger space, knowing the procedures is essential to making sure your carpet is properly installed and maintains its excellent appearance for many years to come.

Preparing the surface is the first step in the carpet glue process. A strong bond requires a subfloor that is dry, smooth, and clean. Dust and debris can be removed with a sweep, and if needed, a vacuum can be used to leave the area spotless. To make an even surface on uneven floors, try applying a leveling compound; this will improve the carpet adhesive’s adhesion.

Selecting the appropriate adhesive is essential. Make sure the adhesive you choose is compatible with the materials you have because different kinds of carpets and subfloors call for different kinds. For carpet tiles, pressure-sensitive adhesives work best; however, a more robust, spreadable adhesive is frequently required for broadloom carpets. To avoid any mishaps, always read the manufacturer’s instructions.

It’s time to apply the glue after the surface has been ready and the adhesive has been selected. Using a notched trowel, evenly spread the adhesive, working in small sections so as not to let it dry out before you lay the carpet. To guarantee a solid bond, let the adhesive dry for the full amount of time suggested before laying the carpet.

Care and accuracy are necessary when laying carpet. Working your way around the room, begin in a corner and firmly press the carpet into the adhesive. To eliminate bubbles and make sure the carpet is firmly affixed to the floor, use a carpet roller. To ensure a tidy and expert appearance, trim any extra carpet along the edges.

These techniques will help you glue carpet successfully, producing a beautiful and long-lasting floor covering. Your carpet will last longer and look better if you take the time to prepare, select the right supplies, and apply the adhesive correctly. Cheers to glue-making!

Step Description
1. Prepare the Surface Ensure the floor is clean, dry, and free of debris to help the adhesive bond better.
2. Cut the Carpet Measure and cut the carpet to fit the room, leaving a few extra inches around the edges.
3. Apply the Adhesive Spread a layer of adhesive on the floor using a trowel, working in small sections.
4. Lay the Carpet Carefully lay the carpet over the adhesive, pressing it down firmly to remove air bubbles.
5. Trim the Edges Use a sharp knife to trim the excess carpet along the walls for a neat finish.
6. Secure the Edges Apply extra adhesive along the edges and press them down to ensure they stay in place.

Types of adhesives

Most carpet adhesives can also be used to glue other types of flooring, such as linoleum. Adhesives, two-component adhesive products, and dispersions are classified based on their composition and mode of action.

Water -dispersive

The most well-known example is PVA glue.


  • Just use it.
  • Can glue not only the carpet, but also other materials.
  • Incombustible.
  • Non -toxic, virtually no smell.
  • If PVA accidentally hit the surface that is not subject to glue, you can remove it with a wet rag.
  • Compared to other means is inexpensive.
  • PVA with glue can glue the carpet on plywood, fiberboard, other bases.
  • Suitable for bases with a water -repellent base.


  • Glue seam is exposed to moisture. In rooms with an increased humidity, it is impossible to use.
  • Due to poor elasticity, the agent after drying is significantly reduced by the life of carpet coatings.
  • If you apply a too thick PVA layer, the strength of the carpet is reduced with the base, and the coating itself over time is destroyed.
  • You can not mount the carpet on the concrete base.
  • Purely textile coatings cannot be glued with PVA.

Acrylic glue is a good example of a water-dispersion composition. It has all of the benefits of PVA plus more—it resists moisture, has stronger adhesive qualities, and dries to form an elastic adhesive suture. is utilized at low temperatures and does not shrink. Glue with an acrylic base is frequently used to make thermoactive seams and in "warm floor" systems. There are no shoe prints left on the carpet. The cost is the only negative aspect.

Two -component

The foundation of funds is polyurethane, to which a hardener needs to be added right away prior to carpet coating installation. Due to their strong adhesion, two-component adhesives are used to attach carpet to uneven surfaces or walls.

  • The effect of moisture does not affect the adhesive characteristics of the glue, the speed and degree of its drying, since it freezes after the passage of chemical reactions, and not due to the evaporation of water.
  • Have a wide range of operation temperatures.
  • You can use rubber -based glue on felt, and when installing tile carpets.
  • The elasticity of glue remains even in a frozen state.
  • If added to the additive tool, carpet laying can be done at a negative temperature.
  • Idin from the components (hardener) has increased toxicity, so you need to work with glue in a well -ventilated room in personal protective equipment.
  • The finished composition should be used for an hour.
  • After laying the carpet, it will be very difficult to remove it.
  • To eliminate adhesive residues, a grinder is used.

Since two-component polyurethane glue sets in just one minute, the carpet needs to be properly laid right away. It might not be sufficient to fix errors of one minute. It functions best in applications where a strong bond with the surface is required, such as when fastening materials to walls.

Velcro adhesives

The primary benefit is that a fixed carpet can be taken off the surface and reglued. Carpet coatings with an adhesive or rubber base can be fixed with velcro. They are able to adhere the coating to the wall because the product possesses strong adhesive properties.

  • The adhesives of the Velcro dry, for full hardening, you need no more than 25 minutes.
  • Universal composition, so Velcro can glue the carpet to concrete and to the tree.
  • Water resistance.
  • Easily removed with detergents on an alkaline basis.
  • Do not contain harmful components.
  • Thermal resistance.
  • Nice.
  • Do not lose their properties for a long time.

For those without any prior carpet-laying experience, adhesive is a good option. Its use is very easy.

The area where the carpet canvases’ joints will be located needs to be lubricated. The adhesive strip’s width shouldn’t be greater than 5 cm. The coating is then applied to the glue and firmly pressed against the surface.

The cost of Velcro is its primary disadvantage. In-store, the cost of five liters of Kiilto Grip composition is approximately three thousand dollars. R.

To ensure a smooth, long-lasting finish, careful preparation and the appropriate materials are needed for effective carpet glue application. To start, level and clean the floor to lay a strong foundation. Select a premium adhesive that is appropriate for the type of carpet you have, then apply it according to the manufacturer’s instructions. To remove wrinkles and air bubbles, press the carpet down firmly after evenly spreading the adhesive. Finally, to guarantee that the carpet adheres correctly, give it enough time to dry before walking on it. With the least amount of hassle, you can attain professional results with this simple approach.


  1. Forbo 525 (Forbo 525). Universal remedy. Available in Germany. It has an acrylic base. Sold in banks for 13 and 20 kg. 1 m.sq. coatings are consumed 0.45 kg of glue. Bank price weighing 20 kg – 3 thousand. R.
  2. Homa Homaco 248 (Homakoll 248). It is produced in Russia. Carpet can be glued to the floor (in t. h. concrete), on plywood, OSB, chipboard, wood and other surfaces that absorb moisture. Glue consumption will depend on the type of glued base. On average by one m. sq. surfaces leaves 0.35-0.45 kg. For a jar weighing 10 kg, you need to pay 1.5 thousand. R.
  3. Acton (Axton). Adhesive ligation is made in Russia. Reliably glues the seams and joints. Has a neutral smell, not toxic. Dries in 10-15 minutes., About half an hour after application retains adhesion characteristics.

How to choose the right

His brand matters when carpet is being laid over glue. It will determine the product’s consumption, the fixation’s dependability, and the coating’s operational lifespan.

The following factors are considered when selecting glue.

  • The area of ​​the pasted surface. With a small meter of the room, it is not necessary to plant carpet on glue, it can be attached with a skirting board.
  • The quality of the base on which the coating is glued. Consider its evenness and ability to absorb moisture.
  • terms of Use. The more active movement on carpet, the more reliable there should be gluing.
  • The basis of the carpet. He can be on felt, jute, rubber or on foamed polyurethane.
  • The method of application. If adhesives have the same characteristics, the one that is easier to apply is selected.
  • Price. This item is especially important if it is necessary to lay the cover of a large area.

Such compositions are not appropriate for novices because if the glue sets quickly, you will need to work with it quickly. Adhesive spots may form on the coating’s front side if the remedy is allowed to solidify for an extended length of time.

Consumption at 1m2

500 g is the average consumption per square meter; however, this number may vary based on the surface’s porosity and means. Chipboard or OSB, for instance, absorbs a lot more glue than metal.

The glue flow information will all be listed on the package.

The consumption will be as follows if the type of adhesive is considered:

  • water-dispersion-0.3-0.5 kg/m2;
  • two-component polyurethane-0.2-0.4 kg/m2;
  • acrylic-0.4-0.5 kg/m. sq.

How to glue the carpet

The carpet can be glued to any surface. If more fixation is needed, installation on glue can be carried out in small spaces. In areas with greater cross-country mobility, such as hallways, staircases, offices, and spaces with a lot of mobile furniture, gluing may be required. The surface needs to be cleaned of dust and debris and ground smooth in order to lower consumption.

  • If the use of the substrate is supposed to be, it needs to be laid and cut. It is laid with a wall of a few centimeters. V-shaped cuts are made in the corners, the edges are adjusted, and the excess material located along the walls is cut off.
  • A carpet is cut by a similar method.
  • Carpet along with the substrate is folded in half and is placed in the center of the room.
  • In parallel, the bend is applied with a narrow glue strip. Part of the coating unfolds and fits on glue. On the front side of the carpet you need to go through a rubber roller. Movements are made from the center to the wall. Such actions provide the best coupling with the base.
  • After gluing, one half proceed to the other in a similar order.

Carpet glue requires meticulous planning and attention to detail in order to be successful. You can guarantee a strong and long-lasting bond that will keep your carpet firmly in place for years to come by taking the time to prepare your surface and select the appropriate adhesive. It is essential to start with a subfloor that is smooth, dry, and clean. Issues later on can arise from the adhesive’s effectiveness being compromised by dust, moisture, or uneven surfaces.

Choosing the right adhesive is just as crucial. Adhesives designed for a particular type of carpet or subfloor may be needed. It’s critical to match the type of adhesive to the surface you’re working with and the carpet. For most carpet tiles, pressure-sensitive adhesives work well; however, wall-to-wall carpeting requires stronger, longer-lasting adhesives. For optimal results, always adhere to the manufacturer’s instructions.

The final result can vary greatly depending on how evenly the adhesive is applied and how long it is given to set. Spread the adhesive evenly and make sure there is no excess that could seep through the carpet by using tools like a trowel or roller. After carpet has been laid, it adheres better if you press it evenly and firmly. Smoothing out any air bubbles and making sure the glue is tight will improve the look and functionality of the carpet.

By following these guidelines carefully, you can ensure that your carpet stays a lovely and useful addition to your room as well as streamline the installation process. You can achieve a professional-looking carpet installation that will withstand regular use with a little perseverance and the appropriate technique. Keep in mind that having the proper supplies and doing extensive preparation are essential for a successful carpet-gluing job.

Video on the topic

Carpet laying without glue

How to glue the carpet?

How to lay and stick carpet with your own hands? Collective farm without a special tool.

How to lay carpet on glue

The process of laying carpet (how to properly lay the carpet with your own hands?)

How to glue the carpet

How glue to glue the carpet

What color, in your opinion, is able to make a person happier?
Share to friends
Alice Chernyshev

Artist with 15 years of experience, color solutions specialist in interior design. I am in love with the world of colors from childhood, I am happy to share my knowledge and experience.

Rate author
Add a comment