How and how to stick the ceiling skirting board from foam correctly is a step -by -step description of the methods

A foam ceiling skirting board installed is a wonderful way to give any space a sense of refinement. This ornamental piece not only conceals the junction between the walls and the ceiling, but it also improves the room’s overall design. Foam is a great material for this because it’s inexpensive and lightweight, which is especially helpful for do-it-yourselfers.

Although installing a foam ceiling skirting board may seem difficult at first, anyone can do it with the right equipment and a little perseverance. To ensure a seamless and polished finish, the procedure calls for exact cutting, careful measuring, and the right application of glue.

We’ll walk you through the exact procedures for installing your foam skirting board correctly in this guide. We’ll go over everything, from setting up your workspace to adding the finishing touches, to make sure you have all the knowledge required to accomplish a faultless finish. Regardless of your experience level with do-it-yourself projects or desire to improve your skills, our comprehensive instructions will enable you to confidently finish this task.

Method Description
Adhesive Application Apply adhesive to the back of the skirting board in a zigzag pattern.
Positioning Press the skirting board firmly against the ceiling, ensuring it"s aligned correctly.
Securing Use masking tape to hold the skirting board in place while the adhesive sets.
Finishing Touches Once the adhesive is dry, remove the masking tape and fill any gaps with caulking.

Plinth gluing products

You must make an advance decision regarding the best glue to mount ceiling baguettes. The glues in the stores vary widely in terms of price and each glue has unique properties and application details. They are separated into polymer, putty, sealants, and "liquid nails" according to the type of glue.

Popular brands like "Master," "Moment," "Europlast," "Cleber," and others are among the many. Certain tools aid in adhering cornices to the wall and ceiling, while others possess lining characteristics. When surfaces have skies, the latter are utilized.

Polymer compositions

These adhesives are regarded as universal, fitting for most common materials in addition to skirting boards. All polymer-based compounds, whether PVC, vinyl, or other, have a relatively viscous consistency and strong surface adhesion when plastered or wallpapered. You can glue even large wall skirting boards and massive decorative baguits because of its ability to withstand high loads.

There are compounds that harden both instantly and gradually. The drawbacks include an offensive smell and hazardous evaporation; it is recommended that a respirator be worn while working.

Glue "Titan"

Titanium is one of the best adhesives; it works well with polystyrene foam and products made from it, and it can also be used with plastic, wood, MDF, gypsum, and traffic jams. Other household applications for "Titan" include sealing ceramic, leather, and rubber goods as well as linoleum, laminate, and parquet flooring.

The following are the glue’s primary qualities:

  • can be used at any temperature, humidity;
  • racks to the action of sunlight;
  • elastic;
  • does not relax, does not crumble;
  • After drying, it is absolutely harmless to a person;
  • economical.

"Titan" adheres foam and plastic skirting boards flawlessly; following the final drying phase, which typically takes a day, they cannot be torn off. Both interior and exterior work can be done with glue. Since it is colorless, the docking seams won’t be seen.

Glue "moment"

Experts typically select the "moment" for skirting boards; in particular, "the moment of express decor installation" is well-liked. Because the glue dries in a matter of seconds, using this tool can be challenging for a novice. It will be challenging to adjust the plinth’s position after fixing. However, the gluing quality is superb, and the "moment" works well for securing decorative elements to the baguette joints.

One of the drawbacks is that ethyl cell content is a toxic material that frequently results in allergies when it comes into contact with the skin. Gloves and a respirator are necessary when working with glue. Loss of vision can result from hobbling! Two other drawbacks are a high price and extensive consumption.

Glue "eco-naset"

The Eco-Naset glue, which has a composition similar to Titan, can be used to install ceiling skirting boards. It works great with polyurethane skirting boards and can also be used to glue ceramic, gypsum, wood, cork, and polystyrene tiles. Adhesion of glue to brick, concrete, putty, gypsum, and drywall is good. Eco-Naset is affordable, transparent, and human-safe.

Polyvinyl acetate adhesives

These funds are safe to use even in children’s rooms because they don’t have any unpleasant odors or harmful ingredients. PVA glue is one instance. Its counterparts based on polyvinyl acetate and water are also included in the group. However, gluing quality is far worse than polymer composition quality. Such materials can be fixed with separate polyurethane elements or with small, light skirting boards. Another way to describe the drawback is as a high consumption—a lot of glue needs to be used.

"Liquid Nails"

Is it feasible to apply "liquid nails" to the curbs? Yes, this glue is thought to be the best for attaching décor and is incredibly convenient to use. "Liquid nails" have a strong adhesive power and don’t affect the material’s texture. Two categories of funds exist:

  1. Unprophylene adhesives include solvents, due to which they have a pungent odor and give toxic evaporates. Only after complete drying become safe. They should be used to glue skirting boards in conditions of high humidity.
  2. Acrylic adhesives – without smell, are made on a water -based, do not have negative properties for health. At low temperatures, they cannot be operated – they are destroyed. Due to the less high quality of the clutch, large skirting boards with such means are better not to attach.


Applying acrylic putty correctly is more difficult and requires more skill. However, if the walls are uneven, all of the fissures and imperfections will be visible, making the joint look more appealing. It is not up to you to decide what decorative elements and corners need to be fixed. This material can even be used to cover the joints in skirting boards, and even though it won’t exfoliate, it won’t stand out against the surrounding color scheme. The product has no smell, is nontoxic, and is totally safe. It is acceptable to work with a putty mixture in low temperatures and high humidity.

Silicone sealants

Purchasing adhesive meters to seal seams makes sense when there are big joints. The adhesives have a dense, elastic consistency that dries to a strong, white seam that is impervious to pollution and moisture. Silicone rubber, plasticizers, clutch amplifiers, and volcanizers are the foundation of the sealant. When gluing kitchen and bathroom skirting boards, it is best to purchase adhesives made by manufacturers who also include fungicides.

It is preferable to use two different kinds of sealant when installing baguettes in the living room. Transparent (less expensive) material used for the plinth’s rear. The corners have white seal joints.

Independently prepared glue

What more can have borders on the ceiling glued to it? To save time, a lot of people independently prepare the composition. PVA glue, dry finish putty, water, and a bank or other container are required. The following is the work order:

  • Pour a putty into a jar – 4 parts;
  • Add PVA glue – 1 part;
  • Stiring, add water to the consistency of sour cream, there should not be lumps;
  • give the product to brew for 15 minutes, mix again;
  • glue can be used within 2 hours.

Put borders in a way that allows them to be put on normally using adhesive. It is applied incorrectly to the ornamental element, which is then pressed up against the wall and held for a few minutes. It is necessary to remove the resultant agent right away until it freezes.

We’ll walk you through the exact steps of installing foam ceiling skirting boards correctly in this article. Everything you need to know to achieve a polished finish will be covered, from selecting the appropriate materials to exact measurements and easy installation methods. This guide will assist you in easily and confidently improving the visual appeal of your space, regardless of your level of experience with do-it-yourself projects.

Types of skirting boards and the choice of glue

Choosing the product based on the material used to make the plinth is essential. Certain glues are unfit for use because they can damage the product’s structure. Several border types are available in stores; the most common ones are listed below, along with suggestions for glue selection.

Polystyrene and polystyrene

These are the most widely available, widely affordable, and useful skirting boards—you can find them in every home and building supply store. They can be painted, and the result will look just as good as gypsum. Realized are standard skirting boards, two-level cornices, and fillets—skirting boards with grooves. Foam and polystyrene borders can be glued to the wall even if you have no repair experience; it’s an easy process.

A lot of people are curious about which material caught on first: wallpaper or skirting? It’s easier to glue foam components directly onto wallpaper than the opposite. The skirting boards will cling to any glue because of their light weight, but we must consider their fragility. You must carefully cut before spreading two glue strips over the area. Acrylic putty will work well in this situation. A little PVA glue mixed into a gypsum finish mixture can be used to seal the cracks between the strips and the ceiling. A white sealant is used to seal joints.

Polyurethane and plastic

Polyurethane is a material that is flexible, resilient to wear, and temperature-tolerant. Polyurethane skirting boards are usually purchased in bulk for areas with bends, corners, and excavations of various sizes and shapes. They are especially important for rooms that have columns and a suspended ceiling that are skillfully glued together.

It is important to consider that these skirting boards may shrink while in use when selecting a glue. The joints are filled with silicone sealant to fill in any cracks, no matter how tiny. Use reputable adhesive such as "liquid nails," "moment," or "titanium." Make sure to apply glue to the ends of the skirting boards; purchasing a specialized tool is advised.

Typically, plastic skirting boards have connecting, internal, and external corners. It needs to be glued using "liquid nails" or another type of glue that sticks to surfaces very well.

Gypsum and wood

Less frequently than other types, wooden skirting boards need expert knowledge and a very strong glue. In essence, they are bought for apartments; higher humidity levels are not advised for homes with classic interior design. Lighter versions are fastened with "liquid nails," and self-tapping screws are also mistaken for heavy skirting boards.

The gypsum cornice has a great margin of strength and is incredibly durable. They even sell forms that can be used to cast parts independently and attach a dry mass to them. Alabaster mixed with PVA or another type of polyvinyl acetate glue is used for dependable adhesion. "Liquid nails" are also used to tarnish larger buildings.

Mounting skirting boards

Selecting the ideal ceiling skirting boards to make them ideal for a particular room is something you should do before beginning any work. This will be contingent upon several factors.

We take into account the width of the material

Skirting boards vary not just in appearance but also in width. The ceiling height—which serves as the deciding factor—will influence the decision. varieties of fillets and skirting boards:

  • narrow (up to 35 mm) – designed for low ceilings, help visually "lift" the wall;
  • medium (36-50 mm)-suitable for ceilings 2.5-3 meters;
  • wide (from 55-70 mm)-glued to the walls of more than 3 meters, visually reduce the height.

It’s critical to determine how many skirting boards you will need to purchase right away. To accomplish this, measure the space, figure out its perimeter, and add some material to any mistakes or damage (if something is cut or broken). The only method to prevent the material from coming apart is to apply glue to wide skirting boards evenly across the wrong side. Pointarily apply glue to narrow borders, especially if they have excellent adhesion. Average widths are most frequently used, and they are glued in a wave-like pattern.

We take into account the design

Because skirting boards will be the finishing touch to the room’s design, special attention should be paid to their shape and appearance. White is the most common color, but pastel and colorful shades are also achievable. The room will appear smaller if the wallpaper and other finishing touches are the exact same color. Conversely, whites will make the space appear larger. It is best to try it on one skirting board at a time and assess the outcome first, as it will be difficult to peel off. If everything is alright, you can carry on working.

The plinth’s design will cause the glue to adhere:

  • Flat, thin can be glued pointwise, it will sit tight in place;
  • Bagetes with stucco molding, voluminous parts are glued to 2-3 wave-like application;
  • Wide decorative products are connected with a continuous layer of glue.

The use of intricate baguette forms with stucco molding patterns is necessary for the classic interior design. For minimalistic, they purchase skirting boards or thin fillets that are the right geometric shape without any drawings. Largely decorated borders don’t go well with colorful wallpaper with embellishments; plain borders look better. Furthermore, these skirting boards are inappropriate for tiny spaces.

The main installation methods

Many people believe that you can glue the plinth without carefully measuring every detail and defining the subtleties. Elements that are poorly engaged, unevenly laid, and disconnected will be the end result. You must thoroughly familiarize yourself with the installation procedures in order to prevent issues. Skirting boards can be joined using glue or putty, both of which have advantages and disadvantages.

We use putty

Depending on the type of glue, skirting boards can be fastened either before or after the remainder of the repair. Thus, in the event that the wallpaper has not yet been pasted, applying a putty mixture is appropriate. Since the unprocessed surface has the most consistent adhesion, professionals prefer this kind of installation.

Skirting boards and putty, a common instrument found in stores or left over from repairs, are required for installation. supplied as dry powder or in completed form. The latter needs to be lump-free and crumbly. If you have the necessary work skills, you can use gypsum compounds, which are powerful but easy to grasp. They’re diluted in tiny amounts. To increase adhesion, you should also purchase a deep penetration primer. From the implements they obtain:

  • Scabbard for metal for wide cornices, stationery knife – for narrow (up to 20 mm);
  • a knock for the formation of corners (you can work without it);
  • small width spatula;
  • sandwiches with small grain, if the flip side is too smooth.

There are multiple stages to the work, the first of which is preparatory:

  1. Carefully inspect the entire perimeter along which the cornice will be laid. Remove defects, bumps. If the baseboard is thin, perfect alignment is required. For grinding, use a bar on which they nailed small sandpaper.
  2. Apply a primer to the walls, wait for its complete drying. Of course, it is better to do such work in the initial preparation, in advance.
  3. Make markings. The easiest way to attach separate panels to the desired place, mark the joint line with a construction or simple pencil. You can calculate fragments even at the stage of purchase of material, drawing a scheme on paper.
  4. Cut the details. This stage for beginners is the most difficult, especially when working with foam plinths. The latter has the ability to crumble, get off unevenly, with Zazubins. Cut joints in a straight line, corners – at an angle of 45 degrees. It is better to practice in advance on small pieces, for this purpose you can buy an extra skirting board.

After that, you can begin applying putty glue. It is diluted as directed by covering it in a bucket, adding water, kneading by hand, or using a mixer. It is preferable to first dilute a small amount of mixture, then add water and fill it with powder. Moreover, the following is how the process goes:

  • dial a small amount of solution;
  • apply on the wrong side of the baseboard, distribute with a thin layer;
  • The rest of the mixture that came to the front part immediately erase with a cloth or sponge;
  • installation start from the corner (any);
  • Carefully press the part on the place according to the marking lines, evaluate the correctness of the installation;
  • You do not need to press the cornice too much, it will still clash normally with the surface;
  • remove the crawled mixture, but in the presence of irregularities, try to distribute it under the edge;
  • When connecting the second skirting board, grease the end with a small amount of putty, then combine it with the previous one;
  • Continue work until the end, then leave the skirting boards until completely dry – for 24 hours;
  • After a day, clean all the flaws and paint the baguettes (if necessary).

Installation for glue

If the room already has wallpaper and the ceiling skirting boards need to be attached from above, glue is typically used in these situations. However, a similar method of adhesion can also be used for bare walls. After the fillets are installed, they risk falling behind if the wallpaper sticker is of poor quality.

As with the putty preparation, tools, surfaces, and markings are prepared. After that, the following procedures are followed:

  • apply glue according to the rules (depending on the width, severity, such as material);
  • Be sure to distribute the product in the center where the main support will have to be;
  • attach the baseboard to the wall, firmly press, withstand as much as the instruction indicates (some compounds require separation, re -gluing, others must be pressed to the wall as quickly as possible);
  • repeat the process for other details according to marking, gently combining cut products;
  • Do not forget to carefully smear the ends of the joints, and remove the excess glue immediately;
  • leave the fillets until complete fixation (usually up to a day);
  • After the gap, cover with a white sealant.

It is advised to use white paint to stain the skirting board if you had to cover a large area. This action will assist in visually masking the flaws. Cornices are primed beforehand.

Newcomers frequently experience failures, and the skirting boards peel off. The following could be the causes:

  • Dirty walls – if not clean the surface, then dust will seriously reduce the adhesion;
  • Too smooth, glossy surface of the skirting board – this is rare, but when buying such a product, it must be fucked from the wrong side;
  • poor -quality, inappropriate glue – thick, wide panels often come off when gluing with a “weak” tool;
  • drafts – the room cannot be ventilated for a day, in the presence of an unpleasant odor, it is recommended to close the room tightly.

Gluing on different surfaces

Depending on the kind of material, attaching baguettes to the walls and ceiling has different features. Below is a description of the differences.

On a stretch ceiling

Stretch ceilings are installed everywhere these days, having peaked in popularity. Without the need for labor-intensive leveling, a flat surface can be achieved; the design can be altered. Prior to beginning work, you should be aware of the following features:

  1. Small weight. It is best to buy foam, polystyrene foam, slightly preferable plastic, polyurethane foam.
  2. Special form. The side lying on the ceiling is less than located on the wall. This is due to the specifics of gluing – the substance is applied only to part of the panel adjacent to the wall. From the side of the ceiling, the skirting board is not lubricated!
  3. Reliable composition. You should choose a remedy with maximum fixation, rapidly drying, durable.
  4. Additional mount. If wooden cornices, other massive skirting boards are selected, they are fixed with glue and dowels, anchors.

The stretch ceiling complements the PVC Clintus’s aesthetic. It is fastened with clips; self-tapping screws are required for mounting. A single, bending bar adorns the angle. It is important that you carefully adhere the baguits because glue stains on the stretch ceiling can harm it.

On the wallpaper

Once you have high-quality glue, you can put up a border in a "legitimate" location. It is crucial to confirm the validity of the wallpaper clutch in relation to the wall, particularly if the finish was created with longevity in mind. Apply wallpaper adhesive to the canvas if needed, then give it a day or two to cure. Another option is PVA glue. Avoid removing the wallpaper when putting in cornices. To accomplish this, adhere a male tape to the border and then use a pencil to make a thin note on the width of the skirting board. It is taken out once the task is finished.

For plaster

Checking the surface’s levelness is crucial before joining the baguette. Sanding or abandoning minor flaws can be done by adhering them to a putty mixture. She cuts the wall, getting rid of the flaws. To hide bumps, skirting boards with rounded edges are also available. They will have to remove any major flaws and align the primer, skin, and wall.

On drywall

It’s a pleasure to glue ceiling panels on drywall because it’s a very even material. Putty trotes are only allowed on the GKL sheet joint zones, which need to be thoroughly cleaned with sandpaper. For GKL, any kind of skirting board will work. inevitably shrinking the space in the room when installing drywall. You can use wide-sided cornices to expand the space visually by hanging them from the ceiling. This will make more space and give it a unique appearance.

How to glue the baseboard on the ceiling in the corners – the specifics of the trim

Even for novices, attaching skirting boards to a level wall usually goes without a hitch, but problems tend to pop up in the corners. There are numerous approaches that can be used to address the issue.

Using the stir

The issue of how to fasten skirting board angular joints can be resolved both with and without it. The stupor is regarded as a carpentry tool for cutting any type of specialty material, shaped like a tray. Depending on the kind of tool, the cutting angle is either 45 or 90 degrees. This is the most practical tool for chopping baguettes; expert installers always use it.

The knock has holes beneath the knife and is composed of plastic, iron, and wood. The priciest models have a rotary mechanism that allows for positional adjustment. This struck the fundamental idea of the operation: the skirting board is placed in the tray, compressed, and sawed through the side slot to produce a cut at an angle. The inner and outer corners will be manufactured using distinct processes. The following is the work methodology for creating an inner angle:

  • make the necessary measurements;
  • insert the strip of the baseboard with the front side up into the device in the necessary way;
  • Squeeze the part tightly with the left hand;
  • put a hacksaw at an angle of 45 degrees through a slot, make a cut;
  • Cut the second baguette in the same way, only in mirror reflection, so that together they form an inner angle.

A metal hacksaw is used to cut skirting boards, but in certain situations, a sharp construction knife works better. You will be able to obtain even product sections as a result.

This is how the outer angle is created:

  • to measure the baseboard along the length from the beginning of the wall to the outer corner, to put on the wrong side a mark with a pencil (the edge should go out a little);
  • put the material in a knock, cut at an angle of 45 degrees;
  • In a mirror reflection, cut off the second skirting board, also leaving a small supply in length;
  • Try the details on the wall, check the evenness of the docking – if there are flaws, cut them with a sharp knife (for this they make a allowance).

At first, it’s advised to get used to the strules and try cutting corners on baguette pieces. Additionally, you can assemble a tool with your hands out of boards and leftover plywood. The letter "P" knocks them down after making corner markings and sliding under the knife.

Without additional tools

You can learn to function without a knock, even though not everyone has one. It is possible to cut the baseboard for the corner:

  • attach one element to the ceiling, tightly pressing the smooth edge to the corner;
  • Draw the line next to the long side on the ceiling;
  • Similarly to do with the second detail on the other side;
  • To mark the point of intersection of lines, when drawing from this point to the edge, an angle of 45 degrees will turn out.

Additionally, you can use your hands to create a template that looks like a knock. I need a thick piece of plywood. On it, a horizontal rectangle with 45-degree markings on both sides is drawn. Sketch the line’s opposing connecting sides. After that, you can draw something on the skirting board and cut it out in the way that the layout calls for.

Installing ceiling skirting boards during the final touches of a room’s design can significantly improve the room’s overall appearance. Knowing the right installation techniques is essential for anyone thinking about using foam skirting boards to get a polished and professional appearance. We’ve provided detailed instructions in this guide to assist you in correctly adhering foam ceiling skirting boards.

To start, planning is essential. Make sure the ceiling’s surface is dust- and debris-free, clean, and dry before starting the installation process. This will facilitate the correct adhesion of the adhesive, guaranteeing a robust and long-lasting connection between the skirting board and the ceiling.

The foam skirting boards should then be measured and cut to the required length using a fine-toothed saw or a sharp utility knife. To guarantee a perfect fit and a smooth finish, precise measurements must be taken. For corner joints, cutting the skirting boards at a 45-degree angle will also help to create a tidy and polished appearance.

After the skirting boards are cut to size, use a caulking gun or trowel to apply an appropriate adhesive to the back of the boards. Make sure you adhere to the manufacturer’s instructions regarding the adhesive’s application and drying period. Starting at one end and moving all the way across the board, firmly press the skirting boards against the ceiling.

Use panel pins or brad nails to further secure the skirting boards once they are firmly in place, paying particular attention to the edges and corners. This will give the skirting boards additional support and guarantee that they stay firmly fastened to the ceiling over time. To effectively hide the nails or pins, be sure to countersink them slightly below the foam’s surface.

Lastly, use an appropriate filler to seal any gaps or cracks between the skirting boards and the ceiling after the adhesive has completely dried and the boards are firmly fastened. Using a putty knife or a moist cloth, smooth out the filler and let it dry fully before painting or finishing the skirting boards as you like.

These detailed instructions will help you install foam ceiling skirting boards correctly, giving any space a refined and fashionable look. Your space’s overall aesthetic appeal can be improved by achieving professional-looking results with careful planning, accurate measurement, and attention to detail.

Video on the topic

The corner of the ceiling plinth. Everything is simple.

How to easily and quickly glue the ceiling skirting boards (molding) without glue and for centuries and make an inner angle

Be sure to remember this trick! How can you easily dock the ceiling skirting board in the corner? #shorts

How to make a corner of a ceiling plinth smoothly and quickly???!

How to properly glue the ceiling skirting board from foam?

How to glue ceiling skirting boards

Installation of ceiling skirting boards from foam

What color, in your opinion, is able to make a person happier?
Share to friends
Daniel Sedov

Master finish with 20 years of experience. I know everything about painting walls, ceilings, facades. I will gladly help you make your home beautiful and cozy.NoEDIT]

Rate author
Add a comment