Gluing the rear -view mirror on the windshield

Although attaching a rear-view mirror to your windshield may seem difficult, it’s actually a simple procedure that you can complete on your own with the right tools and a little perseverance. A strong and long-lasting bond can be achieved by following a few easy steps, regardless of whether your mirror needs to be replaced or has fallen off.

Being prepared is essential for a successful installation. It is essential to clean and prepare the windshield surface as well as the mirror properly. A weak bond that might not last over time can result from the glue not adhering properly due to dirt, grease, or old adhesive residue. It’s also crucial to use the proper kind of adhesive made especially for rearview mirrors.

We’ll walk you through every step of the procedure in this guide, from choosing the right adhesive to making sure the mirror is positioned correctly. You’ll discover how to simplify and expedite the process, enabling you to fix your mirror’s operation and resume your driving safely. Whether you’re an experienced do-it-yourselfer or a novice, you’ll discover that attaching your rearview mirror is an activity you can easily complete.

The most suitable glue brands

The industry-leading adhesive compounds, LoCtite, are manufactured in sets of LOCTITE 03346 and LOCTITE 37438. These sets are made up of two parts, with the only differences being in volume and packing technique:

One or two mirrors can be fixed with the help of the liquid adhesive glue and activator found in the Lectite 37438 set. Aerosol activator, Lectite 03346, is contained in it. Because you can glue a number of mirrors with it, auto repair professionals typically use it.

Additionally, LoCtite offers to glue the rearview mirror to the LoCtite 319 windshield. An activator-impregnated special gasket is present in it. It is situated between the glass and the metal during the glue process, allowing you to adjust for heat deformation. Experts say that of the sets available for purchase on the domestic market, this one may be the best. Indeed, the price is around 800 rubles.

The items made by Permatex are reasonably democratically priced. An activator is also soaked into a unique cleansing-activating napkin found in sets like Permatex 81844 and Permatex 81840. In a retail setting, their price may vary between 400 and 500 rubles.

POXIPOL is a two-component fast-setting epoxy glue that can be used to adhere the rearview mirror to the windshield, based on the many reviews left by drivers. Additionally, using a transparent glue type is advised (a gray kind is also available). If you need to glue a mirror with a piece of shattered windshield, this glue works great because it allows you to line up all the chips underneath the bracket and hide them. A package containing 14 milliliters will require 150 rubles.

Glueing lateral mirrors

Occasionally, the mirror component may separate from the base without breaking apart. It is not difficult to fix the issue if you identify it early on. It is not a reliable method to stick an element on a regular superglley. A glue seam exposed to rain, snow, sinks, and sunlight will soon deteriorate. You must select one of the aforementioned compositions or purchase a neutral glue mixture from a building supply store. The following will be the operational protocol for the mirror restoration:

• get the remaining plate from the case of the part;
• Little the factory tape, which is inside;
• degrease the mirror plate and base;
• apply glue or sealant, fix the elements;
• remove excess glue crawling along the edge;
• squeeze the part with clothespins or special locks.

Double sided tape

Any car or construction site uses this kind of adhesive tape. However, since such a mount cannot be deemed dependable, experts do not recommend using it. If good glue is not available, adhesive tape is used as a temporary solution.

Acrylic glue

High adhesion acrylic copolymers have to smooth surfaces. When it breaks, it is very possible to stick a lateral mirror with their assistance. Typically, the part is used one to three days following the application date. At least one primary fixation takes time (roughly sixty seconds).

Hermetic "Autocles"

This clear, all-purpose adhesive is made to join any kind of material used in the manufacture of automobiles. Because heterogeneous bases have varying coefficients of thermal expansion, it is perfect for combining them.

You can glue side mirrors with the aid of Autocles because of its ability to tolerate shock loads, vibration, frosts, fever, and exposure to technical fluids.

Typically, the first thing that came to mind of a motorist, who wondered: “How to glue a mirror on the windshield of a car” – use a universal instant contact glue.
But I want to warn you from this very rash act. Since universal instant glue is excellent in all its glory only if the loads are static. But withstand moisture, temperature changes, vibration, only two -component glue of a special purpose along the teeth. Such glue can be easily found in any car store, so on the question of where to purchase I will not focus on attention.
Such glue is designed specifically for attaching the rear -view mirrors to the windshield of cars. He is able to withstand temperature changes in our difficult climatic conditions, vibrations due to the low quality of roads, and humidity from endless autumn rains.
The rear view mirror is usually just glued to the windshield of the car in the center. What gives her great protection against knocking down not a neat passenger, but in return receives a vulnerability in the form of aging glue, which can also lead to the fact that it will simply fall off.
So, if you need to glue the rear -view mirror on the windshield, then before you start gluing the mirror on the windshield, you need to choose the place where the car will be located so that direct sunlight does not fall on it. The temperature ideally should be from 18 to 20 degrees Celsius. When all conditions are met, you can start. First, make sure that the windshield and back of the mirror are perfectly clean, low -powered and dry.
After the windshield is ready, it is necessary to remove the rear -view mirror and carefully remove the holder. After that, it is necessary to stick adhesive tape on the outer part of the windshield in the place where we will later attach the rear -view mirror. Wipe the area on which the rear -view mirror will be located with a soft rag dipped in alcohol. A special grid is usually attached to the glue, it must be cut out by applying a mirror to it to get exactly in shape and size of the mirror support. Then you need to apply a thin and even layer of glue to the entire back surface of the mirror. Then attach the net to the glue layer and slowly press the base of the mirror to the windshield to glue the mirror. In the place where you have a stroke film. Do not touch the structure for at least 15 minutes. Then scraping the glue leaked outside the mirror to clean the glass of the car, and let the glue dry thoroughly. For the best result, you need to leave the glue for 24 hours. After this time, it is necessary to remove all the remains of the glue that protrudes outside the mirror, and remove the marking film from the outside of the windshield.
In order to be sure that the glue is completely dried after gluing the stele after gluing. You can, after gluing the mirror, squeeze the glue test on the cardboard and leave it in the same conditions in which your car is located. And after some time, agreed by the manufacturer, you can cut off the squeezed glue, and look at whether the glue has completely hardened along the cut line. Remember that usually complete drying of glue occurs in 24 hours. Of course, the process can be accelerated if you create in the room in which the glue will dry, the temperature is more than 22 degrees. But it is extremely recommended to resort to such a catalyst due to the fact that it simply cannot be reliable enough to glue the mirror, and therefore it is preferable that the drying of the glue passes in natural conditions, so the final result will be better.
At the end of the article I would like to talk a little about safety precautions. As you know, safety and precautions are usually not observed in two cases: either these are newcomers who simply do not know these rules, or vice versa those who already know all these rules by heart. Therefore, I collected several useful tips, both for some, just starting to work with car glasses, and for others who have long been engaged in this.
To make the work safe and productive:
• Be sure to monitor the temperature in the room in which you carry out work. The optimal temperature for work is 20 degrees Celsius.
• Do not forget to look at the shelf life of the grain of polyurethane glue used.
• Never mix various types of adhesives while working with one glass.
• Be sure to track whether the glue is enough for this particular glass, and, nevertheless, always keep a spare cartridge at hand.
• Before gluing, always apply a new mirror to the place where it should be (marked with the marking film)
• Before gluing, do not forget to wipe both surfaces with a degreaser and cleaner.
• Never leave rust and bitumen spots in place of gluing.
• Before use, shake the primer for at least a minute.
• Primer is always placed only where there is no old glue.
• Keep the glue to squeeze out the glue vertically, with a slight slope.
• If the glass on which you glue the mirror without a seal, then make sure that the glue does not lie down next to the edge, since it can get out.
• If the seal gets down during installation, then it must be glued to the glass side, for example, second (cyanic) glue.
• If silk -up is narrow, then it is necessary to ensure that the glue is squeezed out with a nozzle with a width of 8 millimeters, and 14 millimeters high.
• Follow the correspondence of the sites under the rain, mirror, fasteners, the presence of VIN-water, etc. P.
• If you apply glue near the VIN-LETTER, then make sure that the glue does not fall into the VIN-Oblast area.
• Always try to hold the side glasses of the front doors with lowered glass after glued glass at least some time.
observing these simple rules, your work will be safe, productive, and the result will delight the eye!

In my instance, glue costs 80 rubles and fasteners cost 28 rubles.

• Those.Forum support
• Advertising placement

The largest group of Russian Audi brand owners and enthusiasts is called Audi Club. You can read up-to-date news and articles about Audi in our club, ask questions in the forum, and locate a dependable partner for Audi repair, maintenance, and tuning.

HEX Themes has created certain xenforo functionality.

• home
• Feedback
• Help
• Conditions and rules
• Privacy Policy Xeno Gamers Is Lurking in Your Source, Powering You sites 😀
• Up

We need to find the cause if, following auto repair, the lateral or rear view grin almost instantly peels off. It might be:

• poor -quality adhesive;
• gluing too cold surfaces;
• non -compliance with the stages of work (neglect of degreasing, increasing adhesion or poor removal of dried glue);
• Fast start of operation (the polymerization period has not been withstanded).

The car gasket will need to be glued again if it disappears. Installing a fallen accessory requires you to consider the errors that were made and follow the step-by-step repair algorithm.

We made the decision to replace the windshield prior to our trip to the Crimea because the original one had a crack and had been scoured by sandblasting from underneath the wheels. Replaced, XYG (the same company’s glass was glued to the Forester) was glued, and the mirror sung for precisely one week before falling off when the car was exposed to the sun.

The initial fall off

Based on the dried drop on the heel, it appears that the glue needs to polymerize in the presence of UV light from lamps or the sun. However, I don’t think UV rays got there because the nickel is silk-screened rather than glued to clean glass.

Put beneath the heap.

I purchased specialized glue meant for Liqui Moly Article 8059 cases with nylon mesh (the person who glued this will comprehend).

Liqui Moly 8059 rear view mirror adhesive

I removed the old glue from the heel by cleaning it with a kitchen knife sharpener (since sandpaper was not available), degreased the silk screen shop and the fifth itself, and then adhered it as directed.

A little more than a week. Arrived in the Crimea, and on the same day, during the day fell off. All vacation and return road without a mirror. Upon returning home, I decided to try to glue it again, since the second mesh in the kit. Defed first with a degreaser, and then also with a liquid to relieve varnish. Glueed. The mirror did not immediately dress, waited 2-3 days (for the first time 1-1.5 days). I hung a mirror, did not push it to the end, I thought it could, the plastic rests strongly on the glass and begins to tear off the nickel. Two weeks later (yesterday, 19.08.21) The mirror fell off again.

The case’s plastic doesn’t appear to protrude beyond the heel’s plane.

On the one hand

Conversely,

I’m not sure what should stick.

Who is able to inform and counsel?

The same concept applies to an original VAG glue with article D 000 703 A1, which has a nylon mesh. Will it be beneficial? To what extent will it sag?

Although it may seem difficult, attaching a rearview mirror to your windshield is actually quite simple if you have the correct tools and instructions. You can accomplish a strong, long-lasting bond by making sure you have the right adhesive and a clean surface.

It’s imperative to clean the space where the mirror will be installed completely before proceeding. Make sure it’s spotless, taking your time to avoid leaving any dirt, oil, or residue that could weaken the adhesive. For optimal results, use a lint-free cloth and a high-quality glass cleaner.

Next, pay close attention to the adhesive’s instructions that you have selected. Certain products might have particular application and curing time requirements. Typically, you’ll coat the mirror mounting bracket with adhesive and press it firmly against the windshield. To guarantee a solid bond, hold it in place as instructed by the adhesive’s manufacturer.

Prior to securing the mirror to the mounting bracket, let the adhesive fully cure. To make sure the mirror remains firmly in place, this step is crucial. Speeding through this step could result in the mirror falling off, which could endanger your safety while driving.

You can reattach your rear-view mirror with confidence by following these easy steps, which will guarantee that it remains functional and secure. By taking your time and doing the task correctly, you can prevent future problems and maintain a safe and comfortable driving experience.

Although it may seem difficult, anyone can easily and quickly glue a rear-view mirror onto their windshield with the correct supplies and a step-by-step tutorial. To ensure that you can safely get back on the road and see clearly behind you, this article will guide you through the process of selecting the appropriate adhesive, properly prepping the surfaces, and creating a strong, long-lasting bond.

Video on the topic

How and how to glue the rear view mirror. VAZ 2114

Gluing the rear -view mirror on the windshield

How to glue the rear -view mirror to the windshield # 100% result

We tightly glue the rear -view mirror to the windshield