Glue for laying tiles Unis 2000 – Instructions for use

Because of their long-lasting nature, minimal maintenance requirements, and visual appeal, laying tiles is a popular option for both residential and commercial spaces. But choosing the right tiles is not the only step towards a flawless tile installation. The selection of the appropriate adhesive is an essential step in the process. Unis 2000 tile adhesive is a standout choice due to its user-friendly design and dependability among the available options.

A high-performance adhesive made especially for tile installation is called Unis 2000. Because of its formulation, which guarantees a solid bond, it can be used in both indoor and outdoor settings. When tiling a patio, kitchen backsplash, or bathroom floor, Unis 2000 offers the required adhesion to hold your tiles firmly in place.

It’s simple to use Unis 2000 tile adhesive, but for optimal results, make sure you follow the directions exactly. Your tiling project’s success depends critically on precise application techniques, correctly mixed adhesive, and properly prepared surfaces. With the help of this guide, you will be able to confidently tackle your tiling job and achieve professional results every time.

The right application of Unis 2000 adhesive can save you time and avoid common mistakes, regardless of your level of experience with do-it-yourself projects. Now let’s get started on creating a stunning and long-lasting tile installation by going over the step-by-step instructions.

Strong and long-lasting, Unis 2000 tile adhesive is a dependable option for safely installing tiles. To guarantee that your tiling project is finished with expert results, this guide will provide you step-by-step instructions for using Unis 2000, from surface preparation to the finishing touches. These concise instructions will help you achieve a perfect finish whether you’re working on walls, floors, or other surfaces.

Glue Unis 2000 – Features

With Unis 2000 tile, you can forge robust connections between various tiles and bases of various kinds. Suitable for usage in both dry and highly humid environments. This mixture appears white, and it must be diluted with water before use. The solution can be applied to facing work that is done outside the building. When working with the house’s basement, the one item that should never be used is that. Deals with porcelain and natural stones.

Cement, adhesive substances, and plasticizers are components. It is regarded as a universal tool that can be used both indoors and outdoors and is appropriate for leveling surfaces with drops as small as 15 millimeters.

Unis 2000 The following are some of the technical attributes listed in the product description:

• The possibility of working on laying includes temperature indicators from +5 to +30 degrees;
• The average consumption is 3.5 kilograms per square meter;
• The diluted mixture can be used within 3 hours;
• It is necessary to correct the position of the material in ten minutes;
• When working with the flooring, it is allowed to carry out a load on it a day after applying the glue;
• The exposure of the exposure of the temperature varies from -50 to +50 degrees;
• Packing is made in bags of 5 and 25 kg.

With Unis 2000 tile, you can forge robust connections between various tiles and bases of various kinds.

Description for gluing which materials is suitable

Unis 2000 The ability to produce a high degree of adhesion to a variety of surfaces is indicated in the instructions. However, glue can be used separately as aligning agents for small flaws, so a lengthy process of aligning the base is not necessary. It is possible to identify the following areas of the solution:

Concrete base, the composition creates enhanced fixation of tiles with a concrete surface;

Using glue is acceptable when installing a heated floor.

The nuances of use

Yunis 2000 glue is suitable for use on the balcony, terrace, and restroom.

Because it is safe and environmentally friendly, it can be used as gluing finishing material in children’s facilities.

Its component components do not emit toxic elements, because only cement and natural fillers are used, to maintain security separately, the selection of additional elements. When working on laying tiles on the wall, it is necessary to work, starting from above, moving smoothly to the bottom. The mixture differs with plastic quality, the presence of water in the finished mixture does not affect the base, preserving the strength properties when fixing the finish. To preserve the properties of the mixture during storage, packaging in the form of bags is used, with additional protection against moisture. Storage in a closed bag can be carried out within 12 months. Products have a quality certificate.

When installing tiles on a wall, one must work from above and proceed smoothly down to the bottom.

How to use it correctly

Laying needs to be done correctly to yield the desired outcome. They start by preparing the surface because the quality of the foundation will have a significant impact on the outcome. The following phases make up preparatory work:

1. Eliminate the old finishing material.
2. They achieve the smoothness of the surface, you can use glue for differences of up to 1 millimeter per meter of area, in other cases it is advisable to use plaster, the best choice would be to use the plaster mixture of the same manufacturer.
3. If gluing is carried out on the old tile, then the notches are made on the surface of the material. They need to do them in a checkerboard. This action will improve adhesion.
4. The surface should be clean remove all types of pollution, also degrease the wall or floor.
5. In rooms with increased humidity, it is advised to use the waterproofing of the same brand.
6. The surface of the surface is carried out in 1-2 layers, if the work is carried out on a foam concrete or gasolicate base, then special attention is paid to this item.

It is not necessary to wet tiles or surface water.

The guidelines state that Unis 2000 should be bred as follows:

1. A clean container is selected, where the mixture will be stirred, the stirring tool should also be clean.
2. The mixture is added to the water, which is gained in the container in the right amount, the mixing is mixed with a construction mixer, or a drill with a nozzle, interfere with about 3-5 minutes until a homogeneous mass is obtained without lumps.
3. Next, leave the solution for 5 minutes.
4. After this time, the composition again interfere.
5. It will be possible to use the finished glue within 3 hours, if the composition occurs during this period, then you can mix it again, you can not add water.

To preserve the adhesive’s qualities, it’s critical to adhere precisely to the manufacturer’s recommended proportions. The actual application procedure is carried out as follows:

1. On the prepared surface, using the cell, or the standard spatula is applied (thickness 5-15 mm), then it is carried out along it with a gear spatula.
2. For large tiles and porcelain tiles, you should choose a spatula with teeth of 8 mm.
3. After press the tile to the applied layer, while the glue should evenly be distributed over the surface of the tiles, for this, tickled with a rubber hammer.
4. You should not immediately cover a large site with glue, the ability to adjust the position of the tiles last only 10 minutes, so the amount is calculated under this time.
5. If the work is carried out outside the building and the tiles have a large size, then the glue is required and the tiles are also required.
6. The evenness of the styling of the tiles is checked using the construction level, special crosses are used to preserve this parameter.
7. The permissible deadline for starting to walk on the floor is 24 hours, at the same time you can carry out grouting.
8. A warm floor can be turned on, only after 28 days.

The construction level is used to check the uniformity of the tile styling; unique crosses are employed to maintain this parameter.

Adhesive consumption of 1 m2

Read the manufacturer’s instructions on the package to determine the glue consumption. With the assumption that the layer will be 3 mm thick, the average indicator is 3.6 kg per square meter. You must perform a calculation using these data if you intend to add a thicker layer to the tile’s size.

You can wear glasses or work carefully to prevent composition from getting in your eyes while you’re working. Keep the mixture out of children’s reach.

You can wear glasses or work carefully to prevent composition from getting in your eyes while you’re working.

Unis 2000 glue glue is a household remedy that enables you to achieve a superior outcome. emphasized by highly visible indicators of the tile connection’s strength to various grounds. He holds a prominent position among the analogs and is a formidable rival to Gerkules and Cerezite products. It is a health-safe glue that is simple to work with and can be used for facing work in children’s rooms because it will not fade over time.

When you use Unis 2000 tile adhesive, you can be sure that the bond will hold up over time. This adhesive can be used both indoors and outdoors because of its exceptional adherence formula. Because of its adaptability, it can be used with a variety of tile materials, such as natural stone, ceramic, and porcelain. You can achieve a professional-looking finish that will last for years by carefully following the instructions.

Make sure your surface is dust- and debris-free, clean, and dry before proceeding. The adhesive’s effectiveness is increased by this preparation step, which makes it essential. A smooth, lump-free consistency can be achieved by mixing the adhesive in accordance with the manufacturer’s instructions. This will guarantee that the adhesive spreads uniformly and sticks to the surface and tile in the right way.

To ensure that the tiles are securely fastened, make even grooves with the adhesive using a notched trowel. To avoid the adhesive drying out before the tiles set, it is imperative to work in small sections. Using spacers, ensure that the tiles are firmly pressed into place and that there are uniform gaps between them for grouting afterwards. If necessary, make sure to quickly reposition the tiles before the adhesive hardens.

Give the adhesive time to fully cure after you’ve placed the tiles; this usually takes a day. To guarantee a solid bond, refrain from putting any weight or walking on the tiles during this period. After it has cured, you can finish your tiling project by grouting and sealing. If these procedures are followed correctly, the installation of tiles will be durable and of excellent quality.

To sum up, Unis 2000 tile adhesive is a trustworthy option for both novice and expert tilers. It is the preferred choice for many tiling applications due to its strong bonding qualities and ease of use. You can install tiles in a faultless and long-lasting manner by following the directions and giving yourself enough time to cure. For your tiling projects, Unis 2000 offers the dependability and performance you require, whether you’re remodeling a kitchen, bathroom, or outdoor space.

Video on the topic

Tile dismantling, glue junis 2000

Unis 2000. Universal glue for small and medium -sized tiles

Alignment and laying of floor tiles on tile glue high -strength unis 2000.

Brief Overview of glue Unis 2000

Tile for glue junis 2000

Unis (junis) black, bad tile glue?