Features of the processing of floors with enamel PF-266

Enamel PF-266 floor painting is a widely used technique in both industrial and residential environments. Enamel paint type PF-266 is renowned for its long-lasting nature, resistance to chemicals, and glossy appearance. To guarantee the best outcomes, careful planning and attention to detail are necessary during its application.

It’s important to properly prepare the floor surface before applying enamel PF-266. Usually, this calls for a thorough cleaning to get rid of any grease, dirt, or old coatings. In order to improve adhesion, the surface should be sanded and any imperfections or cracks should be fixed.

Depending on the size and complexity of the project, the enamel PF-266 can be applied to the floor using a brush, roller, or spray gun after it has been cleaned and prepped. Applying paint evenly is crucial for producing a uniform and smooth finish. It is usually better to apply several thin coats rather than one thick coat.

It’s crucial to give the enamel PF-266 enough time to dry completely before putting heavy objects or foot traffic on the floor. There are a number of variables that can affect this drying time, including temperature, humidity, and ventilation. It is essential to adhere to the manufacturer’s recommendations regarding drying times.

The painted floor will be resistant to chemicals, abrasion, and wear once the enamel PF-266 has completely cured, making it appropriate for high-traffic areas. The finish will be preserved and the painted floor’s lifespan will be increased with routine cleaning and maintenance.

Compound

An alkyd varnish forms the foundation of the emulsion in enamel. During the production process, it is combined with pigments, fillers, and a solvent. With the help of additives, you can give the coating protective qualities in addition to aesthetic ones. Because of them, the suspension created by an even, thin layer effectively blocks out atmospheric influences while concealing the material’s imperfections.

Properties and characteristics

Depending on the color, one layer weighing 150–180 g is needed to process 1 m2 of surface. The surface is left smooth, uniform, and brilliant after the composition is applied—all without any unnecessary inclusions.

The primary technical attributes of enamel are:

1. Visibility in the interval from 70 to 100 seconds (at a temperature of 20 ° C).
2. Periter degree – not more than 40 %. We are talking about an indicator characterizing the size of the largest particles in pigmented paints and varnishes.
3. Drying time is approximately 24 hours (provided that the temperature fluctuates within 20 ° C).
4. Washing resistance – 0.25 kg/μm.
5. Elasticity for bending – 1 mm.
6. Bloss coatings – 57 %.
7. Adhesion of the composition with other materials – 1 point.
8. Preservation of properties at temperatures from -40 to +60 ° C.

The coating can sustain heavy mechanical loads and successfully withstands moisture.

The purpose of the enamel PF-266

The product is used to apply paint to metal and wooden bases. is suitable for processing both residential and commercial spaces. The box works with any kind of surface.

Crucial! The composition (GOST 6465-76) is only processed on inner surfaces; it is not appropriate for use on exterior surfaces.

The emulsion is mostly meant for processing fairly sizable non-residential properties. Because of this, producers sell their goods in sizable metal containers (30–50 l).

We explore the key elements of applying enamel PF-266 to floors in this article. We examine the special qualities of this specific paint and how it is applied, emphasizing its robustness, adaptability, and visual appeal. To achieve professional results, we provide practical insights and tips ranging from surface preparation to application techniques. The results of your flooring projects can be greatly improved by knowing the subtleties of working with enamel PF-266, whether you’re a professional painter or a do-it-yourself enthusiast.

The color scheme of paint

The following hues of enamel are produced:

• golden brown;
• yellow-brown;
• Red-brown.

The composition’s limited range of shades limits the applications for which it can be used.

Preparation of enamel and surfaces

Preparatory work is done on a wooden floor before applying an emulsion. The material that will be used to apply the composition is just as important as the paint itself. How to prepare emali:

1. After opening the lid, remove the film formed on the surface. This must be done carefully, without leaving solid pieces in the container, otherwise the appearance of the surface will be spoiled.
2. Mix the composition well by making it homogeneous. This operation is recommended to be performed using a drill with a special nozzle.
3. Add a solvent (if necessary and no more than 10 %). This tool can be RS-2, turpentine, white spite.
4. Filter the product using ordinary gauze.

Cleaning is a part of base preparation:

1. Wash the floor using detergents. Pay special attention to the traces of the old paint and rust – they need to be removed using special means.
2. Wash the floor again with clean water.
3. Process the surface with sandpaper, then remove dust.
4. Rinse the floor with water and dry. Now you can apply paint.

Ways to use enamel

Use either a brush or a medium-sized roller to paint. Using a spray gun to apply enamel is permitted.

You can start painting after making the necessary preparations for the PF-266 and the processed base. Use a roller with a middle pile or a painting brush to apply the composition. The spraying method is an option. There are essentially two layers applied. It is recommended to process the surface three times in order to obtain a more dependable coating in the required areas. In this instance, the drying time might be longer than a day.

The tools need to be arranged after the work is done. Enamel residues need to be cleaned off of a roller or brush. Use a solvent, vegetable oil, and dry rag to accomplish this. To preserve its properties, the container containing an unused composition needs to be tightly covered with a lid. It is not acceptable to come into contact with moisture or sunlight.

PF-266 Enamel is a multipurpose and long-lasting paint that is frequently applied to floors. Because of its great resistance to abrasion, chemicals, and moisture, it’s a great option for places that get a lot of foot traffic or are exposed to challenging conditions. Enamel PF-266 must be applied to floors after careful surface preparation. This entails giving the surface a thorough cleaning, fixing any cracks or flaws, and making sure the surface is totally dry before applying.

The simplicity of application of enamel PF-266 is one of its main advantages. It can be applied in a variety of ways, depending on the project’s particular needs, including brushing, rolling, and spraying. Furthermore, enamel PF-266 dries rather quickly, facilitating a quicker coating process completion. To achieve the best results, it is imperative to adhere to the manufacturer’s recommendations regarding drying times and intervals between recoatings.

It’s crucial to give enamel PF-266 enough time to cure completely before putting it through a lot of use or foot traffic after application. The coating hardens and reaches its maximum durability during this curing process, which usually takes several days. Enamel PF-266, when fully cured, leaves the floor with a durable, glossy finish that improves its appearance and offers long-lasting resistance to wear and tear.

Maintaining the integrity and aesthetics of floors coated with PF-266 enamel requires routine maintenance. This involves routine cleaning to get rid of spills, dirt, and debris right away. Periodic inspections should also be carried out to spot any wear or damage so that any necessary repairs or recoating can be done on time. The durability and functionality of the enamel PF-266 coating can be optimized by adhering to these maintenance guidelines, guaranteeing that floors will continue to be elegant and useful for many years to come.

Video on the topic

What does 1 layer of enamel for the floor Dali look like?

Emal PF-266 for OLECOLOR Paul

Olecolor Emal for floor Alpine PF 266

Olecolor enamel for the floor alkido uretany fast -drying

About paints PF-115 and PF-266

Enamel pf. Instructions for use.

Alpine enamel PF-115 for the floor and stairs "Yaroslavl paints". How to paint it correctly?