Fastening the toilet to the tile to glue – go without drilling and bolts

It can be difficult to install a toilet on tile flooring, especially if you don’t want to use bolts or drill holes in the tiles. Using adhesive is a simpler, more direct method than the complicated and messy processes involved in traditional methods, which are still in use today. Using this method reduces the possibility of damaging your lovely tiles while also saving time and effort.

Attaching your toilet to the tile with adhesive is a contemporary and effective method that suits both do-it-yourselfers and expert installers. In order to ensure stability and longevity, adhesives are made to create a solid, strong bond between the tiled floor and the toilet base. This method lessens the overall installation hassle and does away with the need for large tools.

The ease of application of adhesive is one of its main benefits. You can achieve a seamless installation without the noise and dust associated with drilling with the correct preparation and a few easy steps. Those who live in apartments or houses with delicate flooring, where maintaining the integrity of the tiles is essential, will find this method especially helpful.

The adhesive method also provides a clean finish and flexibility. It makes it possible to precisely position the toilet so that it fits into the design of your bathroom. Furthermore, the final appearance is sleek and unobstructed because bolts are not required, which adds to a more aesthetically pleasing bathroom setting.

Preparation for installation

• The toilet is installed in the estimated place, a marker on the tile is drawn its outlines.
• The sewage system, a pipe for feeding cold water is displayed. At least 15 cm of pipe should be located above the floor in order to qualitatively connect it to the toilet.
• The tiled surface is cleaned with a skin, since parts are better glued to the rough surface. Part of the toilet, which will stick to the floor.
• Dust wipes from the areas to be glued on the floor and toilet, then they are degreased with white spirit or any similar solvent.
• In order not to pollute the surface that is not subject to gluing, the outer side is sealed with a painting ribbon or a simple tape.

Which glue to choose

Although using a cement-based adhesive to glue a toilet to ceramic tiles is less expensive, the seam may not always look good. In the future, disassembling it will be challenging as well, particularly if the toilet is connected to a cast-iron sewer. The work can also be completed effectively with liquid nails, but replacing the plumbing will be challenging.

There’s a good chance that using silicone will cause the toilet to shift or break. It will help glue epoxy quickly, but there’s a big chance that tiles and plumbing will get damaged during disassembly.

Cement solution

Usable if the toilet is left for an extended period of time. You’ll need a hammer, cement, and chisel for installation. The marker delineates the contours, the fade is put in place, and its release is linked to the sewage pipe.

After removing the toilet bowl, the drawn contour is used to create a notch in the tile and a small chip in the upper glaze using a hammer and chisel. A cement clutch with tiles is improved in this way. Goggles are worn during actions.

You can prepare a solution with or without sand. It should have a thick consistency. The installation site is thoroughly moistened and generously covered with a solution following the designated contour. The toilet is set on top of the mixture and pressed down a little bit onto the ground. A rubber spatula is used to remove extra cement.

Only after the solution has completely dried up can you use the restroom.

Sealants

The composition of silicone sealant is an important consideration when selecting one.

• Acetic. Has a pungent smell, is inexpensive.

• Neutral. Expensive, used with any material.

Sealants create a flexible, elegant seam and are resistant to UV radiation, high temperatures, and plumbing details.

• Ceresit Sanitary . Special sealant for plumbing, it can be used with increased damp. Provides a good coupling, prevents the spread of mold. Resistant to sunlight, has a long service life. Before applying sealant, the surface needs mandatory stripping to increase the adhesive characteristics of the material.
• Baumit Silikon. Does not allow the distribution of the fungus, resistant to ultraviolet light, can be used for t =+5 …+35 ° C. Used to fix internal plumbing and in tile work. Resistant to high temperatures. Release form – 310 ml tubes.

Liquid Nails

• Acrylic. At the heart of the water emulsion.

• Neoprene. Based on organic dye.

Neoprene composition is better suited for a bathroom. Its drawback is toxicity; its benefit is a more dependable hitch.

The mixtures are resistant to mechanical damage and are not susceptible to moisture. They grasp quickly, allowing for a speedy installation. The brands listed below are appropriate for installation.

• Belife – one -component polyurethane composition. Has a high force of initial coupling. Environmentally friendly, safe for humans.
• Liquid Nails LN-901-The product is suitable for raw rooms. You can adjust the position of glued parts for another 10 minutes. from the moment of application. Withstands t = -29 …+60 ° C, can be used inside and outside the room. Completely dries up per day. This is a universal, strong composition, resistant to mechanical influences.
• Titebond Multi Purpose-a universal remedy for a light beige shade. It has a viscous consistency. Freezes for half an hour, the details adhere tightly. The adhesive substance is toxic, with a pungent odor, so all work with it is carried out in protective equipment. Resistant to dampness and low temperatures.

Epoxy adhesives

Because epoxy can pierce through material structures, its speed on any surface is guaranteed. Epoxy glue is made as a viscous mixture, pasta, or powder.

• EDP ​​- two -component composition of high strength. It has a low shrinkage, can be used in raw objects. Has good quality for an affordable price.
• Moment – heat -resistant composition. Produced in the form of a plastic mixture. Forms a hermetic seam, which after drying can be painted, polished, drilled.
• Contact – can be used in conditions of dampness. Freezes in a maximum of 2 minutes. You need to mount very quickly, since there is no time to correct the situation.

The effective, hassle-free way to secure a toilet to tile without drilling or bolts protects your flooring and keeps damage from happening. You can safely install the toilet while preserving its clean, modern look and guaranteeing stability and durability by using high-strength adhesive products. For do-it-yourselfers seeking a quick, easy, and time- and effort-saving installation method, this is the best option.

Silicon installation instructions

The floor’s surface and the toilet’s bottom are ready for glue. The silicone mixture is applied uniformly to the tile within the marker’s drawn contour, leaving no more than a 4-centimeter indent. The toilet’s lower side is likewise covered in glue. The two surfaces are joined, compressed just a little, and held in place for fifteen minutes.

It is necessary to remove excess silicone right away because it exceeded plumbing specifications. When the glue is fully set, you can use the restroom. Usually, this is completed in a day or less.

Nothing can be done next to the toilet to prevent an unintentional shift from compromising the seam’s integrity.

A day later, the tank is installed and the water supply and sewage system are connected.

It is possible to attach a toilet to tiles without the need for bolts or drilling in a simple and effective manner. You can accomplish a stable and secure installation by using contemporary adhesives and sealants made especially for bathroom fixtures. For many homeowners, this method is a sensible option because it reduces the chance of damaging your tiles and does away with the need for complicated tools.

Make sure the tiled floor and the toilet base are completely dry and cleaned before beginning. For the adhesive to bond well, preparation is essential. The strength and durability required are provided by high-quality construction adhesives, such as those used in bathrooms and other damp areas. To get the best results, adhere to the manufacturer’s instructions.

After evenly covering the toilet’s base with adhesive, firmly press it onto the tiles. To make sure the toilet is securely fastened, it’s critical to give the adhesive product’s recommended curing time enough of time. A long-lasting installation requires curing, even though it can take several hours or even a whole day.

This technique preserves the integrity of your tiled floor while also making the installation process simpler. By avoiding drilling and bolts, you can keep your bathroom’s appearance and functionality intact by lowering the possibility of tile cracks and other damage. Additionally, the use of adhesive results in a more polished, cleaner appearance without any visible hardware.

All things considered, using adhesive to attach a toilet to tile is a practical and easy solution. Time is saved, potential harm is minimized, and a durable bond is guaranteed. With the correct supplies and a few simple steps, you can easily accomplish an installation that looks professional.

Video on the topic

How to glue the toilet and bidet to tiles

How to fix the toilet. We glue the toilet to the floor. Stroyhak plumbing

How to fix the toilet to floor tiles without drilling, drilling, bolts and screws!

Easy, quick and reliable way, installing the toilet on the tile

Installation of the toilet on silicone

How to install a toilet on a tile without bolts and drilling using a sealant with your own hands!!!