EC 3000 tile – properties and procedure for applying

Because of its superior qualities and ease of installation, the EC 3000 tile is a highly recommended option when choosing tiles for your residential or commercial space. This tile is a popular choice for a range of settings because it is made to provide both practical advantages and aesthetic appeal. When remodeling a bathroom, kitchen, or outdoor space, the EC 3000 tile offers a long-lasting and stylish option.

The durability of the EC 3000 tile is one of its main advantages. This tile’s superior construction ensures that it will hold up over time in terms of appearance and integrity by providing resistance against stains, scratches, and moisture. Because of its sturdy design, it can withstand heavy use and offers a long-lasting surface with little upkeep.

The adaptability of the EC 3000 tile is another benefit. It can blend in with any design style, from traditional to modern, because it comes in a variety of colors, patterns, and finishes. This adaptability enables you to achieve a consistent aesthetic throughout your area, regardless of your preferred style—cozy, rustic, or sleek and modern.

Applying EC 3000 tile is a simple procedure that can be done by DIY enthusiasts as well as professional installers. For a smooth application and the best possible adhesion, the surface must be properly prepared. You can improve the overall look of your space with a professional-quality finish if you have the correct equipment and supplies.

We’ll go into greater detail about the unique characteristics of the EC 3000 tile in the sections that follow, along with offering a comprehensive application guide. You can maximize the use of this adaptable and long-lasting tile in your upcoming project by being aware of its features and adhering to the suggested method.

The use of glue

Super-strong adhesive The "family" of funds for facing the premises is referred to as EC 3000 as well, although it has better technical features than EC 2000 glue. Due to its operational properties, this adhesive composition can be used both internally and externally, and it can be used in a variety of high-humidity rooms.

It is important to understand! Glue is primarily used for the application of ceramic tiles and mosaics. The product works well with porcelain tile, artificial stone, and natural stone.

The reasons why the glue adheres well enough are as follows:

• concrete;
• drywall;
• brick;
• plaster;
• aerated concrete.

The product can be used on both horizontal and vertical surfaces for the next tile sticker. It is frequently used to adorn pools, basement cladding, kitchen floors and walls, and bathrooms. Glue works well with medium and small tiles, as well as stone slabs with moderate water absorption (up to 1%). It can also be used to level the bases with slight height variations and fill in tile seams when installing a heated floor.

Description and technical characteristics

Because the technical characteristics and quality of the gluing are essentially unaffected by the type of base, this material is universal. EC 3000 is sold in a variety of containers; banks weighing between five and twenty-five kilograms are typical. After the product is manufactured, it has a six-month shelf life when stored in tightly closed containers (without causing damage to the factory packaging).

Outlining the primary technical parameters:

• The shade of the finished solution is gray;
• The viability of the solution is 4 hours;
• Tiles work time – 20 minutes;
• Tile position adjustment time is 15 minutes;
• the value of adhesion is 1 MPa;
• compression strength – 15 MPa;
• frost resistance – from 35 cycles;
• Environmental temperature during operation -from -5 to +30;
• Operation temperature without damage to the coating -from -50 to +70 degrees.

The product is ideal for vertical surfaces because of its high degree of adhesion. If necessary, heavy tiles can be placed technologically from top to bottom so they won’t slide or shift positions in the future.

Crucial! EC 3000 glue is safe and has an eco-friendly composition.

1 square meter is not much. The processed area’s quadrature and the base’s level of moisture absorption are required for computation (higher glue standards are recommended for highly porous surfaces). Typically, 2.5–3 kg of glue are used per square meter of surface, with a 5 mm layer thickness.

Preparation of a solution of glue

Cool, clean water must be prepared in order to manufacture the solution. For a 25 kg bag, 5.75–6.75 liters of fluid are sufficient; this means that 0.23-0.27 liters of fluid are consumed for every kilogram of dry mixture. Potential deviations from the standard are welcome, but the final product should have a thick, homogenous consistency akin to sour cream. The steps involved in getting ready for EC 3000:

1. Accurately measure the smaller (from the packaging).
2. Pour in the water into a convenient tank for kneading.
3. Pour glue powder.
4. Apply a construction mixer for mixing, a drill with a special nozzle (manually mix the mass so that there are no lumps left, it will not work).
5. Wait 10 minutes.
6. Once again, mix the product, if necessary, enter another water.
7. Get to work.

Preparation of the base

Carefully prepare the wall, floor, or other base that will receive the application of EC 3000. It is free of filth, dust, and fat, and previous coatings like putty and varnish are removed. Should you depart from this kind of pollution, the glue’s quality of adhesion will decline. Any appropriate plaster that has depressions deeper than 5 mm must be diluted in the presence of pits in order to seal up irregularities. It is imperative that additional work be done once the wall has dried completely.

The cleaned base needs to be primed before the tiles are adhered to. When there is significant surface absorption, using special soils is advised. The EKG300DEEP/EKANTISIPTIC soil is good. Additionally, the primer needs time to dry.

Close sequence with EC 3000 glue

Using this glue does not require soaking ceramic tiles or any other materials beforehand. That is, the tile needs to be dry before gluing! Using a toothed spatula, apply the glue in the solution in one direction. Lubricate a few tiles right away, then gently press them to the base in succession.

It’s critical to understand! You shouldn’t apply the product to excessively large tiles right away because it doesn’t allow for enough adjustment time due to its extended adhesive properties.

Following application of the plates in accordance with the pre-made marking, their location is rapidly adjusted until the ideal outcome is obtained. Inter-seams are cleaned at the conclusion of the project. Only after the glue beneath the tile has dried do they need to be filled. The adhesive composition takes 16–24 hours to harden, but it takes 72 hours to reach its maximum strength. As soon as the task is finished, you must thoroughly clean the tool.

For many surfaces, EC 3000 tile is a robust and adaptable choice. Well-known for its superior adherence and wear resistance, it works best in areas exposed to the elements or high traffic. Its long-lasting finish that holds up over time makes it perfect for both indoor and outdoor applications due to its resistance to moisture and chemicals.

Applying EC 3000 tile necessitates meticulous planning and focus on details. The surface needs to be clear of any impurities that can prevent adhesion, dry, and clean. For optimal results, it’s critical to adhere to the manufacturer’s instructions regarding mixing and application methods. The durability and aesthetic appeal of the tile can be increased by achieving a smooth, even finish with the aid of the appropriate tools and techniques.

The simplicity of maintenance of EC 3000 tile is one of its main benefits. It creates a strong, stain- and damage-resistant layer once applied. The tile will continue to look brand-new for many years with routine cleaning using gentle detergents and avoiding harsh chemicals. Because of this, it’s a great option for both home and business environments where durability and aesthetics are crucial.

In conclusion, EC 3000 tile provides a dependable and appealing option for a range of surfaces. For many applications, its strong adhesion, resistance to environmental factors and wear, and ease of maintenance make it the ideal choice. You can guarantee a long-lasting, high-quality finish by following the right application techniques.

With its exceptional adhesion, weather resistance, and long-lasting finish, the EC 3000 tile is a great and resilient choice for indoor and outdoor surfaces. The process of applying EC 3000 tile is simple and guarantees an even and smooth finish as well as maximum performance. The key characteristics of EC 3000 tile will be covered in this guide, along with detailed instructions for application that will guarantee expert results and maximum durability.

Video on the topic

Why tiles disappear, porcelain tiles of gross errors of tiles

How to make any hole in the tile or porcelain tile?

How to stir tile glue for work on the floors correctly

How much tile glue can withstand?