Dishwashing can be difficult at times, particularly if there is greasy or food residue to clean. While conventional dish soaps work well, there are other approaches that can work just as well. Using a mixture of baking soda and stationery glue is one such technique. This method may seem strange, but it works surprisingly well to leave your dishes spotless.
Baking soda is a common household staple for a variety of cleaning jobs because of its natural deodorizing qualities and mild abrasiveness. It can assist in scrubbing away dirt from dishes without harming delicate surfaces. However, stationery glue—which might seem like an odd choice—acts as a binding agent to increase the baking soda’s ability to scrub the dishes.
Start by lightly dusting a damp sponge with baking soda before using this method. After adding a few drops of stationery glue, give your dishes a quick scrub. The mixture will combine to create a paste that can remove even the toughest stains. To guarantee that no residue is left behind, give your dishes a thorough rinse with warm water. This will leave them shining and clean.
It is noteworthy that this technique works best on non-porous surfaces like stainless steel, glass, and ceramic. Because baking soda is abrasive, it should not be used on non-stick cookware as it may damage the coating. By keeping these pointers in mind, you can use baking soda and stationery glue to effectively increase the effectiveness and environmental friendliness of your dishwashing routine.
- Using glue and soda
- Washing dishes
- How to boil dishes with soda
- Soda and mustard
- Laundry soap and soda
- Hydrogen peroxide and soda
- We remove the pollution using table vinegar
- Cleansing of pots and a pan using stationery glue
- Video on the topic
- We clean the pots with soda and glue, grandmother"s method.
- Whether the pans are washed out with glue, soda and soap? 🤔 Remote the "grandmother" method!
- How to clean dishes from soot and fat? Glue + soda + soap
Using glue and soda
Think about how soda and stationery glue can be used to clean the pots and pans.
To make a cleaning solution, you need to take:
- Silicate glue – 400 grams.
- Calcinated soda – 500 grams.
- Water (better heated) – 20 liters.
- Large capacity.
After everything is ready, you can begin:
- Pour water into the container.
- Add a measured amount of glue and soda, mix until they are completely dissolved and homogeneous (homogeneous).
- In the prepared solution, lay the dishes that need to be freed from the car.
- At the end of the hour, all the pollution should lag behind the surface, it remains to rub it a little and rinse it under running water.
Crucial: the dirt will exfoliate more quickly and effectively the higher the temperature of the solution.
Boiling is an additional method for cleaning dishes using glue and soda. Only the solution containing the dishes needs to be brought to a boil before being taken off the fire; the composition and quantity stay the same. The dishes are thoroughly cleaned and wiped down with a sponge (you can even use metal ones) once they have cooled.
Washing dishes
You shouldn’t leave dishes unwashed for an extended period of time as this will lead to stubborn food and fat residue that will be difficult to remove. The pollution will be cleaned up, but the dishes won’t last as long as they should because of frequent use of harsh brushes and abrasive cleaning agents, which could cause cracks and scratches. Consequently, it is preferable to wash the dishes as soon as possible after using gentle soap and non-aggressive detergents.
How to boil dishes with soda
You can get ready the following solution to clean the kitchen utensils: Five teaspoons of baking soda are dissolved in one liter of warm water and then added to the dishes, which need to be cleaned. After bringing to a boil and holding it on low heat for roughly 20 minutes, let it cool. After wiping the contaminated areas and pouring the mixture, rinse the dishes.
Soda and mustard
The baking sheet from the oven or a burnt pan can be easily cleaned with the aid of drill soda and mustard powder, which is required for:
- Mustard powder is poured into the bottle.
- Add 2 tablespoons of baking soda.
- Add water and knead to a paste state.
It’s important to remember not to cook the paste "in reserve" because it will quickly degrade.
Laundry soap and soda
To prepare a pasty remedy from soda and laundry soap, they make the following:
- Rub the fourth part of a pack of laundry soap on a coarse grater and completely filled with well -heated water.
- After the dissolution of the soap, 1.5 t. tablespoons of soda, the same amount of mustard and 4 ampoules of ammonia.
- All components are thoroughly mixed and removed at the same time.
- The entire mixture is poured into small containers with hermetically closing lids. After a few hours, the product is ready for use.
Note: Rubber gloves must be worn when handling ammonia, and the kitchen must be periodically ventilated.
Hydrogen peroxide and soda
So, you’ll need the following to clean the steamed dishes:
- Half a glass of soda.
- 25 grams of detergent.
- 2 tablespoons peroxide, sponge.
Guidelines for clearing steamed areas:
- Mix all the ingredients in one bowl and beat a little – in their consistency they should resemble whipped cream.
- Distribute the mixture over the entire surface that you want to clean.
- With the help of a sponge you can clean the entire surface of pollution. If the stain is very perfect, you need a little more time.
- Rinse the baking sheet, pan or pan under water.
We remove the pollution using table vinegar
For the purpose of eliminating burners from stainless steel and aluminum dishes, vinegar is a fantastic DIY solution. All that is required is to add 9% vinegar to the pan, wait three hours, and then wash and rinse it.
Depending on the level of pollution, you can remove persistent contaminants by boiling half a piece of laundry in vinegar for 30 to 60 minutes.
Cleansing of pots and a pan using stationery glue
Even the oldest pollution can be dissolved with chancellery glue. All pots and pans will regain their original shine and beauty when cleaned with a product containing this ingredient.
There are various methods for cleaning dishes with glue:
- Prepare the tool: dissolve a third part of a pack of soda and 1 tube of glue in 10 liters of warm water. In this solution, boil dirty dishes over low heat for about 30 minutes, then rinse.
- In 10 liters of heated water, stir 1 bottle of glue and 4 tbsp. tablespoons of soda. Put the dishes in the mixture and bring to boiling. Boil for half an hour, wash with a hard sponge, rinse.
- 2 tbsp. tablespoons of table salt, a pack of 72% of laundry soap (grated) and soda in a volume of 1 cup dilute in 10 liters of warm water. Depending on the pollution, the used dishes should boil in this mixture from 30 minutes to 3 hours. After cooling the mixture, it is thoroughly rinsed.
- 150 grams of baking soda and 100 grams of glue are dissolved in a capacity of 10 liters. They place kitchen utensils and bring to a boil.
- In 4 liters of heated water, a third of a pack of laundry soap (previously grated on a coarse grater) and silicate glue in an amount of 125 grams are stirred. The cleaned dishes with soot or fat deposits are placed here and boiled over low heat for 30-40 minutes.
Nuance | Description |
Effective Cleaning | Soda is abrasive and can scrub off tough stains. |
Safe for Most Surfaces | Both soda and glue are generally safe for most dish materials. |
Sticky Residue | Stationery glue may leave a sticky residue if not rinsed well. |
Gentle Scrubbing | Use a soft sponge to avoid scratching dishes. |
Rinsing Thoroughly | Ensure all soda and glue are completely rinsed off to avoid residue. |
Eco-Friendly | Soda and glue are non-toxic and environmentally friendly. |
It can be surprisingly effective to clean dishes with a solution of soda and stationery glue, but there are a few things to keep in mind. This technique uses baking soda’s abrasive power to remove tough stains while the glue binds and lifts dirt off surfaces. However, in order to prevent any potential harm to your dishes, it is imperative that you use these ingredients correctly.
First, make sure the glue you use is water soluble and non-toxic. Always read the label before using glue as some glues contain chemicals that should not be on surfaces that come into contact with food. To ensure there are no unfavorable reactions, make a paste out of a small quantity of glue and baking soda and test it on a small, discrete section of the dish.
Use a gentle sponge or cloth to apply the mixture so as not to scratch delicate surfaces. Apply light circular motions while giving particularly hard-to-stain areas extra attention. Make sure there is no glue left on the dish by giving it a thorough rinse in warm water. This is a crucial step because any glue residue could contaminate your food.
Lastly, not all materials can be used with this technique, even though it works well with a lot of different kinds of dishware. Since soda is abrasive, don’t use it on non-stick surfaces as this could harm the coating. Additionally, use caution when handling hand-painted or antique dishes as the mixture may be too strong. You can use soda and stationery glue to safely and effectively clean your dishes if you follow these guidelines.
Although using soda and stationery glue to clean dishes may seem strange, it’s a surprisingly good way to remove stubborn grease and grime. While stationery glue’s adhesive qualities trap and lift residues, soda’s abrasive nature helps scrub away tough food particles. Your dishes will be spotless after using this mixture instead of harsh chemicals. To guarantee that your dishes are safe for use and to get rid of any glue residue, it’s crucial to give them a thorough rinse. Those who want to use less conventional detergent are going to love this green cleaning tip.