Carter pistol for plastering: quickly, simple, effectively

Plastering, particularly when done by hand, can be a labor- and time-intensive process. But newer equipment, such as the plastering Carter pistol, is revolutionizing this work and making it easier, faster, and more efficient. Smooth, even surfaces can be achieved with less effort with the aid of this tool, which is intended for both DIY enthusiasts and professionals.

Plaster is sprayed onto walls or ceilings in a uniform layer using the Carter pistol. This guarantees a more consistent finish while also expediting the application process. Because of its user-friendly design, even people with little experience can produce results that look professional.

The Carter pistol’s efficiency is one of its key benefits. While learning traditional plastering techniques takes a lot of time and expertise, this tool makes the process much simpler. Users can tailor the plaster to suit the specific requirements and preferences of their projects by adjusting the plaster’s thickness and flow.

The Carter pistol not only saves time but also lessens physical strain. Applying plaster by hand can be physically taxing, resulting in weariness and uneven results. With the Carter pistol, users can cover more ground more quickly, which lessens physical strain and increases overall productivity.

The Carter pistol is revolutionary for plasterers looking to streamline their work. It is a priceless addition to any toolkit due to its simplicity of use, effectiveness, and capacity to produce high-quality finishes. This tool makes plastering less of a daunting task, whether you’re working on a large construction project or renovating a single room.

Purpose and principle of operation of the cartoon pistol

It is commonly understood that the cartoon gun is a pneumatic tool used for applying putty, plaster, and other building mixtures. Professional finishers frequently use the gun to launch starting plaster and during finishing operations. Because mechanized labor works faster and requires less complexity than manual plastering, its productivity is significantly higher. During the day, you can typically process up to 100 square meters with a pistol and apply a layer that is between one and three centimeters thick.

The cartoon gun is perfect for this use:

  • dense types of paint and other paints and varnishes with increased viscosity;
  • decorative types of plaster – multicolor, mosaic, Venetian;
  • facade plaster;
  • liquid wallpaper and silk plaster;
  • liquid traffic jams;
  • marble coatings;
  • some types of primer.

The completed construction solution is discharged from the nozzle of the cartoon gun while it is in operation due to pressure. By connecting the compressor with specific technical features, this is made feasible. The product’s primary components are:

  • steel barrel;
  • nozzle;
  • a container for a solution with a volume of 3 liters;
  • handle with a trigger;
  • nozzle with a dozen (suction pipe);
  • purge ramrod to clean the clogging holes.

The majority of plaster cartoons come with a set of nozzles that are interchangeable based on the kind and consistency of the solution. Applying thick dough-like compounds requires using a diffuser nozzle with a 30- to 45-degree column angle. A nozzle is positioned at a 15–20 degree angle for liquid solutions to prevent the solution from draining from the base.

Hopper-Och

This device is also known as a pneumatic bucket and is thought to be an analog of the cartoon pistol. It joins the compressor as well, but because there isn’t any compressed air in the dozen, the pressure inside its container will be lower. Plaster is applied to the walls or ceiling using a bucket-shaped container on the hopper-chip, which has multiple holes piercing it from the bottom. The majority of buckets can apply only a thick solution and are designed to operate without a compressor.

To be content ↑

Carter gun

The hopper-chip and the gun differ primarily in that the latter allows the solution to enter a separate container with multiple holes. Furthermore, the spray area at the pistol is determined by the corner where the air mass enters the solution; in the hopper-chip, this is irrelevant.

Since the cartoon pistol only sprays when traveling along a hillock, it has the advantage of not losing working mass. Handguns are substantially less expensive than hoppers. Furthermore, Hopper-Khovshi is not appropriate for drawing or applying texture plasters; cartoon devices are.

To be content ↑

Device and characteristics of the cartoon pistol

The device got its name because the pistol case has a suitable "weapon" form. It has an extended trigger that can be pulled with three or four fingers, and when it is pressed, the air supply opens. There is a fitting that connects to the compressor and high-pressure hose at the bottom of the handle. With a detachable hose, the suction tube’s threaded valve locks the air flow’s output.

The gun’s nozzle has multiple interchangeable nozzles, both for regular use and decorative purposes. A cone-shaped container that is attached from above serves as the solution’s container. Many handgun models feature an operator’s handle, which lets you use your second hand in case holding the gun gets tough. Additionally, some cartoon pistols have adjustable screws on the back and air cranes at the input that let you adjust the level of difficulty.

To be content ↑

Material

Cartoon handguns are typically constructed from aluminum or its alloys. These materials don’t add much weight to the design and are sufficiently robust. Although there are devices with nylon (plastic) containers available for purchase, the solution’s container can also be made of aluminum. The latter are even lighter, and they are chemically inert racks to mechanical loads. Because stainless steel resists rust and microdamage, it is used in the production of nozzles.

To be content ↑

Dimensions and weight

The easier a device is to use, the more convenient it is for the master. Devices typically weigh between one and three kilograms and have a capacity of three to five liters. The gun’s length can reach up to 15–25 cm. Professional models can hold up to 8 liters, but they are very difficult to hold in your hands after you refuel them with a solution.

DUZ dimensions and their purpose

Selecting the appropriate nozzle for plastering is essential; it should match the filler fraction in diameter. Nozzles suitable for 4, 6, and 8 mm are almost always included with a gun and work well for most manipulations. The 2.5 and 3 mm diameter duzes (tips) are thought to be less in demand.

The cut angle of each nozzle varies, and it is chosen based on the solution’s density. The most widely used DUZ is one that has a 45-degree cut, which works well with plaster made of lime, gypsum, and regular cement.

Necessary pressure and speed

The right compressor must be chosen for the gun in order for it to operate at its best. While some models have a performance of 170-250 liters per minute and a pressure of 3–4 bar, others have a pressure of 4–8 bar and can use up to 220-380 liters of plaster. Generally speaking, 8 bar is the maximum pressure and 1.5 bar is the lowest that can be achieved. Plastering can be done with an operating pressure of 4 bar, which is supported by the average apparatus.

To be content ↑

Types of cartoon pistols and their price

For groups, the device unit is conditional. They are all based on the same operating principle and have comparable designs:

  1. Decorative-final devices. Designed for applying the material with a layer of up to 12 mm thick, more often used for finish or design work. Many models have a byonet – a metal disk with drilled holes of different diameters, which is placed instead of a standard nozzle.
  2. Pistols for starting plastering. Used for more rough work, when you need to apply plaster. Can perform thick layers of material.

There are two categories of cartoon pistols: professional and home. The former operate at 3–4 bar of pressure and have a small capacity (up to 4 liters). Occasionally, the level of assembly quality is subpar, making them unsuitable for everyday use. The latter, which account for active use, are appropriate for professional finishes. They have a wide variety of tips and are made with sturdy materials and fittings of the highest caliber. These products have containers that hold more than four liters.

Plastering is revolutionized by the Carter pistol because it makes the process easier, faster, and more efficient. Because this useful tool does not require traditional troweling, even novices can easily achieve smooth, polished finishes. Its precise application minimizes waste and mess, and its ergonomic design lessens fatigue. Plastering becomes a simple and enjoyable task with the Carter pistol, which guarantees a high-quality result without the hassle, whether you’re taking on a small home project or a larger renovation.

Which device to choose

You must decide right away when purchasing the device how often and for what purposes. It is advised that professionals select a more costly, dependable device with a significantly longer service life. Another crucial factor is the cartoon pistol’s performance in liters per minute: For home use, 170 liters is sufficient; however, this indicator is too small for masters.

Make sure the case is free of flaws such as chips, cracks, and other defects. It is necessary to have replaceable nozzles so that users can easily screw up with their hands; good devices have a smoothly pressed trigger with no backlash. The quality of the work will increase if the gun has an air tap because it will control the pressure.

Instructions for use

To begin with, a cartoon pistol should be used to apply the plaster mix in a trial manner. This will determine how powerful it is and the best distance to the surface. Usually, when applying gypsum plaster, the gun should be held very close to the wall, about 20 to 25 centimeters from the base. Each layer’s thickness should be able to withstand 10–12 mm; if not, use the unit in two entries. Only after the first layer has dried and been processed using a construction grater is the second layer applied.

Since handling the device involves some physical exertion, it is best to process no more than 1.5–2 square meters of wall in a single technique. It is not required to fill the cartoon pistol’s container all the way because doing so will make operation more difficult. You must put on a protective helmet and respirator before taking any further action to ensure safety. When applying stone chip compositions, wear protective helmets made of materials resistant to shock and wear specific eyewear.

Working with a cartoon gun will follow these steps:

  1. Preparation of the base. Necessarily cleanse the wall, drain it, primed and allow you to completely dry. If there are serious height drops, cutting strongly protruding areas with further manual plastering with cement mixtures.
  2. Installation of lighthouses. To navigate the thickness of the applied layer, put special beacons. They will help to observe the evenness of plaster application.
  3. Preparation of the solution. Dilute the solution of the desired density. Monitor its homogeneity and the absence of lumps, otherwise after drying the layer of plaster will crackle. In small portions are made in small portions, and this rule is especially relevant for gypsum mixtures with low viability.
  4. Setting optimal compressor power. If the air pressure is weak, the plaster will fly apart or drain from the surface. Excessively high pressure causes echoing the hose and stopping work.
  5. Installation of the nozzle. If there is no experience in work, they put a nozzle for medium density solutions. It will allow you to quickly find the necessary skills.

In order to get the stream to spray on the wall at a right angle while it is in use, the gun is kept at belt level. The tool is moved in a straight line against the wall, applying the next row of solution with a small indentation to the preceding one. They follow the guideline to ensure proper alignment after the first layer is finished.

Delay of solution

Plaster for a cartoon gun should have the consistency of thick sour cream and be able to flow easily along the container walls. Because the right fillers are used, mixtures containing marble or mica crumbs typically hold together better. More liquid compositions are used to create drawings. Generally speaking, cartoon pistols can be tucked even with synthetic mixtures and adhesive, which causes their density to be slightly higher than what is specified in the instructions.

To be content ↑

Simplicity and efficiency are essential when plastering. One particular tool that exemplifies both of these traits is the Carter pistol for plastering. Its easy-to-use design makes it possible for both pros and do-it-yourselfers to accomplish flawless finishes with little effort.

The Carter pistol’s speed is one of its greatest advantages. With this tool, plastering large surfaces can be done in a fraction of the time it takes with traditional methods because it streamlines the plastering process. Whether you’re working on a major construction site or a small-scale renovation project, the Carter pistol can help you complete the task efficiently and fast.

Furthermore, the design of the Carter pistol is centered on simplicity. With simple controls and little setup needed, even plasterers with no experience can produce results that look professional. Its ergonomic design guarantees comfortable handling and lessens user fatigue with prolonged use.

All things considered, the plastering Carter pistol provides an excellent blend of simplicity, speed, and efficacy. This tool can make plastering easier and help you get high-quality results quickly, regardless of your level of experience. It is ideal for beginners or experienced professionals looking to take on home improvement projects.

Video on the topic

Testing a cartoon gun and a discharge tank

Wall putty using a compressor

Carter gun | Relief plaster | Eyes of sulfur, handles

Foam reinforcement, mechanically, cartoon gun, compressor, quickly

Errors in the use of a cartoon pistol

Figure gun (Marshalltown) VS (China) use.

capabilities of the cartoon (textured) pistol.

What color, in your opinion, is able to make a person happier?
Share to friends
Daria Yakovlev

Interior designer, author of online color design courses. I will help you create a harmonious interior using color.

Rate author
Design-Estet.com
Add a comment