Adhesives of the “Tampon” series for different types of tiles – instructions for use and properties

When working with tiles—whether for walls, flooring, or décor—the adhesive chosen can have a big impact on the project’s durability and final result. The adhesives in the "Tampon" series are strong and dependable, and they are especially made to work with a variety of tile types. A professional finish requires knowledge of these adhesives’ characteristics and the proper way to apply them.

Every kind of tile—ceramic, porcelain, and even natural stone—needs an adhesive that can work with its particular qualities. The "Tampon" series offers customized options that guarantee the best adherence and durability. This tutorial will walk you through each of the "Tampon" series’ various variants, describing their unique qualities and the best ways to use them.

To keep tiles firmly in place and resistant to deterioration over time, tile adhesive application is essential. The "Tampon" adhesive series provides detailed instructions on how to mix, apply, and cure the adhesives, making it easier for pros and do-it-yourselfers to get the best results. You can guarantee the beauty and longevity of your tiling projects by adhering to these instructions.


Construction chemistry funds are produced by Plitonit (Russia-Germania) and are utilized for domestic purposes by both novices and experts. The most widely used tile adhesives are those meant for applying porcelain, ceramic, and clinker tiles to floors and walls. There are several uses for tile glue:

  • gypsum putty and plaster;
  • concrete and reinforced concrete;
  • brick;
  • groove slab;
  • floors with a heating system;
  • lime-cement slabs;
  • Covers of covered pools.

Tile adhesives belonging to the "Tilet" A, B, or C-Series are available in 25 kg and 5 kg bags. Within is a uniform gray powder mixture that has been diluted with water according to the suggested ratio. Cement, additional astringent ingredients, adhesive additives, modifiers, and fillers are all part of the mixture. There is a maximum grain size of 0.63 mm overall.

The plasticity of glue is high. This characteristic enables you to steadily hold the tiles—even on uneven, vertical surfaces—and prevent them from slipping. The primary technical attributes of glue are:

  • the thickness of the glue seam – up to 10 mm;
  • drying time before the start of operation or grout of the seams is 24 hours;
  • the temperature during the application of glue – from +5 to +30 degrees;
  • The operating temperature of the adhesive seam – up to +60 degrees;
  • maximum sliding of the tiles – up to 0.5 mm;
  • Tile position adjustment time is 15-20 minutes;
  • The viability of the portion of the solution is 4 hours;
  • frost resistance – F35;
  • adhesion of glue with a concrete base – 0.6 MPa for ceramics, 0.5 MPa for porcelain tile;
  • Compression strength – M50.

The glue in the package has a 12-month shelf life. Its fundamental characteristics can be reduced after this point.

Forms of release

The stores offer an enormous selection. The user can select the preferred material based on the specifications, tile and ground characteristics, and other factors. The most widely used adhesives are:

  1. "Timnitis a". Typically, such a tool is used as a universal masonry solution. Suitable for different types of tiles, does not slide on vertical surfaces, is well fixed on horizontal bases. "Tilent A" has excellent moisture resistance.
  2. "Tilet in". The material includes additional additives that increase its frost resistance. Suitable for ceramic tiles and porcelain tiles.
  3. "Timlit in+". The water resistance of this composition is increased, because it can be used for finishing work in wet rooms, pools, saunas. Due to frost resistance, the mixture is used for different facade works.
  4. "Tarnet Express VB". This glue has all the properties of “Tultinite B”, but has a higher drying speed (fast -hardening composition). After two hours, you can grout the seams, therefore the glue will come in handy during emergency work.
  5. "Tileton in maxiLoy". Used to finish surfaces with large -format slabs, stone blocks, provides a high degree of adhesion. The product can be applied with a layer up to 30 mm.
  6. "Tilet into the clinker". The specialized composition for laying the clinker, stone, does not shrink, has high reliability.
  7. "Tilet in Pro". The professional composition for complex work is suitable for mosaics, finishes of basements and facades, terraces, balconies.
  8. "Tarnet in Superopol". Used for floor cladding, made on a cement basis. Helps fill small and medium voids, align the floor.
  9. "Tarnet Supercomine Thermocles". Suitable for cladding with different types of tiles of furnaces, fireplaces, other grounds that will subsequently be heated. This glue can also be grouting heated surfaces. Operating temperature – up to +150 degrees.
  10. "Tilet with". The composition is used on problematic grounds – on old ceramics, paint, surfaces with the remains of other glue. Also, the product is suitable for gluing tiles outside of buildings and in pools.
  11. "Tarnet with marble". Specialized glue for marble decoration, has high moisture resistance, quickly hardens (in 8 hours), is suitable for pools.

Whether you’re working with ceramic, porcelain, or glass tiles, the adhesives in the "Tampon" series are specifically designed to guarantee robust, long-lasting bonds. This article covers surface preparation, mixing instructions, application techniques, and drying times to give a clear guide on how to use these adhesives effectively. You can get professional-quality results and make sure your tiles stay firmly in place for many years by following these simple steps.

Advantages and disadvantages

There are numerous benefits to using this brand’s tile adhesives. The dry mixture comes out evenly and homogeneous almost instantly, and it is very easy to knead and does not form lumps. Additional virtues

  1. Great adhesion. The composition includes special additives that provide a high degree of reliability of the mixture, it firmly holds the tile on the basis. For large -format plates, it is recommended to choose specialized glues "Tileton" that can hold large weight material.
  2. Elasticity. This property is especially valuable for laying tiles subjected to dynamic loads (for example, in new houses that shrink). The glues "Tarnet" are able to compensate for the hardness, fragility of ceramics, not allowing it to deteriorate. Elastic compositions are widely used for lining of the floors.
  3. Moisture resistance. All glues by default are moderately moisture resistant, but some have an enhanced ability to resist the influence of water. They are used for facing pools, paths, porches.
  4. Frost resistance. Some adhesions of the Tlibet series can be used not only for internal, but also for external work – they perfectly withstand several cycles of freezing and defrosting. After thawing, the glue seam does not crack, he will not crumble.
  5. Wear resistance. Glue "tile" serves for a very long time, as well as the main material. Particularly durable means of category with.

Among the benefits, it’s also important to remember:

  • Convenience of kneading;
  • ease of application;
  • high drying speed;
  • minimum installation time;
  • low price;
  • An extensive sphere of application.

The only drawback that can be identified is the requirement for excellent base preparation; without it, the layered materials will fall behind the surface. Because you still have to pay too much for an unnecessary volume when gluing tiles, there are no packages weighing less than 5 kg on sale.

Consumption rates

Depending on a number of variables, 1 m2 of glue "Tilet" may be consumed on average differently. The following indicators determined its value, which is 1.7–5 kg/sq. m:

  • the size of the tile (the larger it is, the greater the consumption due to the increase in the thickness of the layer);
  • tile material (tile absorbs more glue than ceramics);
  • the evenness of the base and the quality of its preparation (more glue will have to apply on uneven surfaces);
  • a method of applying a solution (continuous or toothed spatula);
  • Master skills (newcomers often allow glue losses, uneven adhesive layer, etc. D.).

The order of work

It is vital to confirm that the working conditions meet the manufacturer’s specifications before beginning any work. During operation, it is crucial that the temperature stays between +5 and +30 degrees Celsius. For the following three days following the work date, the dried tiles should be at the same temperature. After the tile installation is complete, you can begin using the floor; the walls can be used sooner—up to 24 hours later (for adhesives with express drying this time below). The grouting of the inter-seams may begin at the same time.

Preparation for work

You should assess the tile’s actual condition first. If there is fat, dust, or pollution in the primary material, the glue’s adhesion may suffer. The tile must be thoroughly cleaned, dried, and not submerged in water. Subsequently, it is imperative to confirm that the grounds are prepared for work. It must be robust, long-lasting, and devoid of unnecessary details and components. If not, these regions will exfoliate with the tile that has been laid. It is crucial that the base is level, deformity-free, and devoid of significant variations.

Additional suggestions for surface preparation:

  • all the cracks, cracks are thoroughly subsided, then treat with sandpaper;
  • dirt, fat, dust, wash, wash, degrease the base;
  • Porous materials (for example, aerated concrete) are primed 1-3 times;
  • For priming drywall, it is better to use the compositions of the same brand in which antiseptic and fungicidal additives are included;
  • The floors must be treated with antifungal solutions, especially if they are located in rooms with an increased moisture level.

Preparation of the mixture

The dry mixture and water used to prepare the "Tilet" glue must be at room temperature. In actuality, the glue must be left in the warm for a few hours or longer. To knead dough, use clean buckets or other containers free of pollution or unnecessary impurities. The following tools need to be clean: a drill with the right nozzle and a construction mixer. The quality of the composition will deteriorate if the remnants of glue and other building solutions are not removed with tools.

Since there are frequently unnecessary chemical contaminants in technical water, it is best to drink clean water when preparing glue. The cell ought to use it for the dry mixture’s rash. Use 0.24 liters of water for every kilogram of powder. A large package weighing twenty-five kg requires roughly six liters of liquid. The following is the process for breeding the product:

  • pour water into the container;
  • fall asleep dry powder;
  • Stir the glue with a mixer.

Therefore, it’s critical to achieve a perfectly homogenous solution devoid of lumps. Applying the mixture to the wall should prevent it from flowing down if it is properly prepared. The required consistency was achieved in this instance. After that, the mixture needs to be left for five minutes before being mixed again. Throughout its application, knead the solution occasionally (4 hours).

Subtleties of application

Using a gear or smooth spatula, apply glue. Experts advise against using a smooth tool, but adhesion with the base will increase if you give an adhesive layer a comb structure. Applying glue to an excessive amount of area at once should be avoided as this could cause a dry crust to form on the composition, which would need to be removed and replaced with a fresh solution.

Benefits of using a "Tilet" of glue:

  • After applying the glue, tiles are placed on it, cautious rotary movements are produced, while separate elements are pressed into the solution;
  • Between the tiles, crosses are put on, observing the correct size of the inter -seam;
  • Within 20 minutes, the location of the tiles is adjusted, if necessary, using the laser level to clarify;
  • Excess glue is immediately removed with a metal spatula, a knife, preventing them from freezing;
  • The outer side of the tiles is rubbed from glue with a rag, a damp sponge.

Void may occur when large-format materials are used underneath the coating or when tiling over heated floors. It is advised in this situation to apply glue to both the base and the inside of the tiles using a combined method. Only a toothed spatula is used for this; any other tool will cause the layer to be too thick. If required, a smooth tool is used to align the glue.

It is imperative that the floor not be used until the mixture has dried completely (day). The tile may shift and fully exfoliate in areas where the product layer was too thin if the glue has not reached its maximum strength. Within three days, there can be no severe physical impact on the floor (e.g., moving furniture), and connecting a warm floor within the following seven days is forbidden. On the other hand, more even heating of the room’s air will hasten the glue’s full drying process.

It is imperative to wear personal protective equipment (PPE) when handling glue, particularly when kneading the solution. Use a respirator and safety glasses to prevent the dry mixture from getting into your eyes and airways. They are required to wear gloves when working. Skin that has come into contact with the product is thoroughly cleaned with water.

Type of Tile Instructions and Properties
Ceramic The "Tampon" series adhesive for ceramic tiles requires a clean and dry surface. Apply the adhesive evenly using a notched trowel, then press the tiles firmly into place. It offers strong adhesion and is suitable for both indoor and outdoor use.
Porcelain For porcelain tiles, prep the surface by removing any dust or debris. Apply the "Tampon" series adhesive with a trowel, ensuring full coverage. Press the tiles firmly into the adhesive, and allow proper drying time for optimal results. This adhesive provides excellent bonding strength for porcelain tiles.

The "Tampon" series of adhesives is a great option for both professionals and do-it-yourselfers because it provides a dependable and adaptable solution for a variety of tile types. These adhesives are made to guarantee a solid adhesion, giving your tiling projects long-lasting durability. Their special formula accommodates various tile materials, guaranteeing performance and compatibility in a variety of applications.

The instructions are very clear, making it easy to use "Tampon" adhesives. It is essential to properly prepare the substrate; make sure it is dust- and grease-free, clean, and dry. The best adhesion and ease of application are ensured when the adhesive is mixed to the proper consistency according to the instructions. A professional finish can be attained by evenly applying the adhesive and firmly pressing the tiles into place.

Because of their water resistance, flexibility, and powerful bonding power, "Tampon" adhesives are appropriate for both indoor and outdoor applications. They are resistant to a range of environmental factors, so your tiles—whether in a kitchen, bathroom, or patio—stay firmly in place. Their ability to set quickly also cuts down on wait times, enabling you to finish your projects more quickly.

All things considered, the "Tampon" line of adhesives is notable for its simplicity of application, dependability, and versatility across various tile kinds. You can ensure the longevity of your tiled surfaces and attain excellent results by closely adhering to the instructions provided. These adhesives are an excellent option that consistently produces high-quality results, regardless of the size of the project—from small-scale home renovations to large-scale commercial undertakings.

Video on the topic

Glue for Plitonit tiles with

Glue for Plitonit tiles in+

Plitonit on express options for using #Timmobnikpb #Repair Sunuzla

Plitonit in+

Plitonit Glue for porcelain


Tile alignment system from plitonit #toolbox #SVP #Timmodnikpb #Timm

What color, in your opinion, is able to make a person happier?
Share to friends
Daria Yakovlev

Interior designer, author of online color design courses. I will help you create a harmonious interior using color.

Rate author
Add a comment