5 ideas make a homemade laser level, which is no worse than a store

Building a DIY laser level can be a satisfying project for both professionals and do-it-yourselfers. You can create a tool that works just as well as one you could buy from the store with just a few simple supplies and a little creativity. A laser level ensures accuracy and saves time when working on more complicated construction projects, installing shelves, hanging pictures, and other tasks.

The customization that comes with creating your own laser level is one of its best features. The gadget can be customized to fit your unique requirements and tastes. Furthermore, building one yourself frequently comes at a lower cost than buying one already built, which is a big benefit for projects with limited funds.

We’ll look at five creative ways to make a DIY laser level in this guide. Every technique makes use of readily available materials or everyday household objects, so you won’t need to search for specific parts. Even if you lack sophisticated technical knowledge, you can still use these do-it-yourself solutions since they are meant to be straightforward but still efficient.

These tips will assist you in achieving professional-quality results without the professional price tag, regardless of your experience level with do-it-yourself projects. Now that you have your supplies ready, let’s explore the world of DIY laser levels. You’ll be shocked at how easy and enjoyable making your own precision tool can be.

Method number 1

To manufacture a basic device, you must first gather all the necessary parts and equipment:

• wooden bar 8x3x2 cm;
• Crohn"s battery or an analogue of 9V with a connector under the contact connector;
• Laser module 3-5 V with a red beam;
• 2 CR2032 batteries with a plastic holder with terminals;
• half a round mirror;
• a small direct current engine (5-12V);
• soldering iron and solder;
• copper wire;
• hacksaw for metal;
• a gun for a thermocle with a rod;
• ruler;
• marker;
• Izolent.

Procedure

The bar that will form the level’s foundation is first divided into a piece of the designated size. A plastic holder with terminals and a module are connected, given the polarity, using multiple cuts of wire. have an engine and a battery connector, too.

Electrical tape is then used to adhere the mirror in order to shield the surface. The engine shaft is glued with a thermoclei after the middle is located on the back of the ruler and marked with a marker.

Next, the engine with a mirror is at the end of the bar, and the "crown" at the end is secured with the same glue. The mirror cannot move around the axis if the engine shaft is not positioned outside the bar.

Crucial! Since the accuracy of the beam line on various surfaces depends on how evenly the battery is placed, the laser module with the battery holder is pasted last and must function as precisely as possible.

Place two CR2032 batteries into the designated compartment after removing the island from the mirror. In order to use the leveling, you must first turn on the power, aim the beam toward the wall or ceiling, and then assess the outcome.

You can achieve an extremely distinct mark by aligning the leveling at the bubble level and modifying its location in relation to the base. Such a device can be used on drywall, tiles, laminate, and other surfaces.

Method number 2

Using a standard laser pointer, which is available at any children’s toy store, is an additional way to make a laser level. Additionally, you must get ready:

• bubble level;
• pegs made of wood 1-1.3 meters with a diameter of 5-6 cm;
• a piece of rubber;
• a sheet of boards or plywood along the length of the bubble level;
• clamps;
• Self -tapping screws.

Assembly of laser levels

Get the pointer ready by breaking the glass in the nozzle after adhering the cardboard tip to boost the beam’s brightness. The pointer is secured at the bubble level using clamps, and a piece of rubber is positioned underneath it to make adjusting the beam’s direction easier.

Next, take a position:

1. One end of the peg or bar is pulled for the convenience of fixing in the ground.
2. Fasten a sheet of plywood to the second end of the bar with self -tapping screws, placing strictly perpendicularly (this will maintain measurement accuracy).
3. If it is supposed to put the level on hard surfaces (for example, on concrete), by the second end the peg is also screwed by a sheet of plywood.

Prior to employing the leveling, the stand is driven or placed on the ground, and a bubble level is used to level its position (the bubble must remain in the center). Included is a pencil to mark the point where it appears on the wall.

Two points are connected once the stand has been carefully rotated along the axis in the horizontal plane until it reaches the next mark. When installing electrical wiring evenly, this level is the most practical to use.

Method number 3

Another method of creating a laser level will need a water-filled basin. The truth is that a laser beam can be set up with the horizontal water plane acting as a base.

Take this action:

1. Pour water into a basin or wide bucket under the edge.
2. Take a piece of foam, strictly in the middle fix the laser pointer.
3. Foam is placed in water, turned on the pointer.
4. The container is placed at the level of the future line on the wall that must be outlined.
5. Turn the laser in the right direction and mark the point on the wall with a pencil.

Crucial! In the event that this approach is selected to generate a laser level, it is important to consider that the beam’s horizontality will be compromised if the poison is not properly centered and there is a skew on one side. There will be an incorrect mark set.

Method No. 4

A more conscientious approach will be necessary for the manufacturing of a cross level. You’ll require:

• Two laser poisoning;
• Trenoga video cameras;
• CDs;
• rotating electric drive (for example, from an unnecessary player).

Although this device requires more work to create, it is perfect for building and repairing furniture, particularly kitchen cabinets.

The following will be the work course:

1. Two compact disks are glued together to increase their overall thickness and prevent the clue of the pointer during rotation.
2. Both laser poles are attached to the disks with electrical tape or tape.
3. The player is placed on the tripod, which should freely rise vertically and horizontally.
4. Disks with poles are placed in the player and rotate along the axis.
5. The lines that appear on the wall are noted using a bar and a pencil.

Making your own laser level is a project that can be both economical and satisfying. With easily obtained materials and simple directions, you can make a tool with precision and functionality that can compete with commercial models. The suggestions we’ve provided are not only useful, but also adaptable, enabling you to customize your laser level to meet particular requirements and tastes.

The ability to comprehend the inner workings of this practical instrument is one of the main benefits of DIY laser levels. In addition to improving your abilities, this practical experience offers you the self-assurance to troubleshoot and alter your creations. Furthermore, creating your own laser level can be an enjoyable and instructive project that’s ideal for improving your do-it-yourself skills.

These methods provide dependable solutions whether you need a laser level for construction projects, home improvement tasks, or crafting. You can get professional results without paying professional prices if you have a little imagination and some simple tools. If you take on the challenge, creating your own laser level will prove to be a rewarding project.

Never forget that safety comes first. When using lasers and other tools, always take the necessary safety precautions. To guarantee the effectiveness and safety of your DIY laser level, carefully follow the instructions. By keeping these things in mind, you’ll be well on your way to developing a useful addition to your toolkit.

To sum up, it is both possible and useful to construct a DIY laser level. Utilizing the concepts offered, you can create a superior tool that is suited to your unique requirements. Savor the experience and the sense of accomplishment you get from making something practical by hand.

Building your own DIY laser level can be a more enjoyable and economical option than purchasing one from the store. This article will provide five creative ideas for creating a laser level that is as accurate and dependable as any commercial product out of common materials. For your next project, these simple-to-follow techniques will help you achieve perfectly straight lines, whether you’re a do-it-yourself enthusiast or just trying to save money. Prepare to astound yourself with your own dexterity and artistry!

Video on the topic

Laser level (with your own hands)

Do -it -yourself laser level

Homemade laser level

Laser level with its straight hands

Take a note! How easy it is to make a laser level.#shorts

Do -it -yourself laser level in 1 minute